CIRCULAR DIN JACKS RIGHT ANGLE PCB MOUNT Adam Technologies, Inc. DJ SERIES 5 POSITION JACK DIN 5DIN POSITION JACK SHIELDED 5 POSITION .807 [20.50] NON-SHIELDED 5 POSITION .610 [15.50] ø.453 [ø11.50] ø.275 [ø7.0] .807 [20.50] ø.540 [ø13.70] ø.275 [ø7.0] .770 [19.50] .394 [10.00] .472 [12.0] ø.453 [ø11.50] .795 [20.20] .401 [10.20] .098 [2.50] X .098 [2.50] .496 [12.60] .591 [15.00] .126 [3.20] X = PITCH .197 [5.00] OR .394 [10.00] 3 .492 [12.50] .590 [15.00] .118 1 [3.00] 2 5 4 .394 [10.00] .590 [15.00] .590 [15.00] DJ-005-S X 3 .098 1 [2.50] 2 5 4 .394 [10.00] DJ-005-.5 .590 [15.00] DJ-005 3DIN THRU 8 POSITION JACK SHIELDED 3 THRU 8 POSITION DIN JACKS SHIELDED, POSITIONS: 3P, 4P, 6P,7P, 8P NON-SHIELDED, POSITIONS: 3P, 4P, 6P,7P, 8P .831 [21.10] .831 [21.10] .752 [19.10] ø0.2800 .770 [19.50] ø0.4720 .770 [19.50] .787 [20.0] ø0.5560 ø0.5560 .098 [2.50] X .150 [3.80] .098 [2.50] .590 [15.00] .197 [5.00] X = PITCH .197 [5.00] OR .394 [10.00] .590 [15.00] .492 [12.5] 2 5 .197 [5.00] ø.055 [ø1.4] .098 [2.5] 7 1 4 8 .197 [5.0] 6 .098 [2.5] X .216 [5.5] .098 [2.5] 3 2 5 7 8 1 4 6 .394 [10.0] .590 [15.0] .394 [10.0] .590 [15.0] Recommended PCB Layout Recommended PCB Layout DJ-008 .098 [2.50] X = PITCH .197 [5.00] OR .394 [10.00] X 3 .197 [5.0] .098 [2.50] X .098 [2.5] ø.055 [ø1.4] .492 [12.5] .756 [19.20] ø0.2800 ø0.4720 .150 [3.80] 7-ø.055 [ø1.40] X .492 [12.50] DJ-005-S.5 .098 [2.50] .591 [15.00] X = PITCH .197 [5.00] OR .394 [10.00] 7-ø.055 [ø1.40] .118 [3.00] X DJ-008-S MATING ARRANGEMENT OF FACE CONTACTS CONFIGURATIONS 214 3 3 Position 4 4 Position 5 5 Position 6 6 Position 7 7 Position 8 8 Position POSITION POSITION POSITION POSITION POSITION POSITION 909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM