AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n General Description The AME4624/AME4625 analog switches feature low ON resistance, single-pole, double-throw (SPDT) with wide operating single power supply voltage range, from 1.8V to 5.5V. The AME4624 offers break-before-make switching while the AME4625 offers make-before-break switching. n Functional Block Diagram IN V+ NO AME4624/AME4625 has 1Ω max ON resistance when +5V power supply is used. These products also have fast switching speeds, tON = t OFF = 50nS max. COM AME4624/AME4625 are available in SOT-26 & TSOT26. NC n Features l GND Low RON l Wide Operation Supply Voltage: 1.8V to 5.5V l Fast Switching Time: tON = t OFF = 50nS max. In Logic NC NO 0 ON OFF 1 OFF ON l TTL-Logic Compatible l Pin Compatible with MAX4624/MAX4625 l l l l High Bandwidth: 220 MHz(typ.) Guaranteed Break-Before-Make(AME4624) Guaranteed Make-Before-Break(AME4625) All AME's Lead Free Products Meet RoHS Standards n Applications l Power Routing l Battery-Operated Equipment l Audio and Video Signal Routing l Low-Voltage Data-Acquisition Systems l Communications Circuits l PCMCIA Cards l PC Peripherals Rev.H.03 1 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Pin Configuration SOT-26/TSOT-26 Top View SOT-26/TSOT-26 Top View 6 5 4 AME4624 AME4624AEEY 6 5 4 1. IN 1. IN 2. V+ 2. V+ AME4625 3. GND 4. NC 2 3 3. GND 4. NC 5. COM 1 AME4625AEEY 5. COM 1 6. NO 2 3 *Die Attach 6. NO *Die Attach Non-Conductive Epoxy Non-Conductive Epoxy n Pin Description 2 Pin Pin Name Pin Description 1 IN Digital Control Input 2 V+ Positive Supply Voltage Input 3 GND 4 NC 5 COM 6 NO Ground Analog Switch-Normally Closed Analog Switch-Common Analog Switch-Normally Open Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Ordering Information AME4624/4625 x x x x x Special Feature Number of Pins Package Type Operating Temperature Range Pin Configuration Pin Configuration A: 1. IN 2. V+ (TSOT-26) 3. GND 4. NC 5. COM 6. NO Operating Ambinet Temperature Range E: -40OC to +85OC Package Type E: SOT-2X Number of Pins Y: 6 (SOT-26) Special Feature L: Low profile Y: Lead free & Low profile Z: Lead free n Ordering Information Part Number Marking* Activity Mode Package Operating Ambient Temperature Range AME4624AEEY AZLww Break-Before-Make SOT-26 - 40oC to +85oC AME4624AEEYZ AZLww Break-Before-Make SOT-26 - 40oC to +85oC AME4624AEEYL AZLww Break-Before-Make TSOT-26 - 40oC to +85oC AME4624AEEYY AZLww Break-Before-Make TSOT-26 - 40oC to +85oC AME4625AEEY BAHww Make-Before-Break SOT-26 - 40oC to +85oC AME4625AEEYZ BAHww Make-Before-Break SOT-26 - 40oC to +85oC AME4625AEEYL BAHww Make-Before-Break TSOT-26 - 40oC to +85oC AME4625AEEYY BAHww Make-Before-Break TSOT-26 - 40oC to +85oC Note: ww represents the date code and pls refer to Date Code Rule on Package Dimension. * A line on top of the first letter represents lead free plating such as AZL Pls consult AME sales office or authorized Rep./Distributor for the availability of package type. Rev.H.03 3 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Absolute Maximum Ratings Parameter Maximum Unit 6 V Note 1 V 300 mA V+ , IN COM , NC , NO Continuous Current COM , NC , NO B* ESD Classification Note1: Signals on COM, NC and NO can not exceed V+ Caution: Stress above the listed absolute maximum rating may cause permanent damage to the device. * HBM B:2000~3999V n Recommended Operating Conditions Parameter Symbol Rating Unit Ambient Temperature Range TA - 40 to +85 o Junction Temperature Range TJ - 40 to +125 o Storage Temperature Range TSTG - 65 to +150 o C C C V+ 1.8 to 5.5 V IN CMOS, TTL Logic V n Thermal Information Parameter Package Die Attach Thermal Resistance* (Junction to Case) Thermal Resistance (Junction to Ambient) SOT-26 TSOT-26 Non-Conductive Epoxy Internal Power Dissipation Symbol Maximum Unit θJC 140 o C/W θJA 280 o C/W PD 400 mW Maximum Junction Temperature 150 o C Solder Iron(10 Sec)** 350 o C * Measure θJC on center of molding compound if IC has no tab. ** MIL-STD-202G 210F 4 Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Electrical Specifications V+ = +5V +/- 10%, GND = 0V, INH = 2.4V, INL = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25OC. Parameter Test Condition Symbol Min Typ Max Units ANALOG SWITCH On-Resistance On-Resistance Match between channels RON TA = +25 OC 1.0 TA = TMIN to TMAX 1.2 TA = +25 OC 0.12 TA = TMIN to TMAX 0.15 V + = 4.5V ICOM = 100mA V + = 4.5V ∆Ron ICOM = 100mA VNO or VNC = 3.5V Ω Ω + On-Resistance Match Flatness V = 4.5V RFLATE TA = +25 OC ICOM = 100mA V NO or VNC = 0V, 1V , 2V NC or NO Off-Capaitance COM On-Capacitance COFF CCOM(ON) 0.15 TA = TMIN to TMAX 0.2 Ω 0.2 O 30 pF O 87 pF f=1MHZ , TA=+25 C, Figure4 f=1MHZ , TA=+25 C, Figure4 + Switch Off-Leakage Current INO(OFF) INC(OFF) V = 5.5V V COM = 1V, 4.5V TA = +25 OC V NC or VNO = 4.5V or 1V TA = TMIN to TMAX -0.1 0.05 0.1 -1.0 1.0 µA DIGITAL I/O Input Logic High INH Input Logic Low INL Input Current Logic High or Low IIH , IIL 2.4 V + = 5.5V 0.8 V IN = V +, 0V -1.0 1.0 V µA SWITCH DYNAMIC CHARACTERISTICS Turn-On Time t ON Figure 2 Turn-Off Time t OFF Figure 2 -3dB Bandwidth BW RL=50Ω TA = +25 OC 50 TA = TMIN to TMAX 60 TA = +25 OC 50 TA = TMIN to TMAX 60 TA=+25oC 220 ns ns MHZ POWER SUPPLY Power Supply Range + V Supply Current Rev.H.03 V+ + I TA = TMIN to TMAX + + V = 5.5V, IN = 0V or V TA = TMIN to TMAX 1.8 5.5 V 10.0 µA 5 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Timing Diagrams Figure 1. Switching Time (AME4624 / AME4625) V+ NO or NC VOUT COM RL VIN CL Logic Input IN GND H Logic Input 50% L 0.9xV IN VOUT OV t ON 6 tOFF Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Timing Diagrams (contd.) Figure 2. Break-Before-Make Interval (AME4624) V+ NC COM VIN VOUT NO RL Logic Input CL IN GND H Logic Input L VOUT tD Rev.H.03 7 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Timing Diagrams (contd.) Figure 3. Make-Before-Break Interval (AME4625) V+ NC VNO NO COM VCOM VNC RL Logic Input RL CL CL IN GND H Logic Input L VNC 0.9xVCOM 0.9xV COM VNO 8 Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Timing Diagrams Figure 4. Channel Off / On Capacitance V+ 10nF V+ COM IN Capacitance Meter V INL or VINH NC or NO f=1MH Z GND Rev.H.03 9 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 Ron vs. COM Voltage over Supply Voltage Ron vs. COM Voltage over Temperature 9 1.25 +1.8V 7 TA=+850C T A=+105 0C VCOM =100mA 8 1.00 +2.0V 4 T A=+250C 0.75 +2.3V 5 RON(Ω) R ON(Ω) 6 +2.5V T A=-550 C T A=-400 C 0.50 3 +3.0V 2 0.25 +5.0V 1 0 1 2 3 4 5 0 1 VCOM (V) 3 2 4 5 VCOM (V) Charge Injection vs. COM Voltage(NC pin) OFF Leakage vs. Temperature 100 1.6 1.4 50 AME4624 0 1.0 q(pC) OFF Leakage(µA) 1.2 0.8 0.6 -50 -100 0.4 -150 0.2 0.0 -40 -200 -20 0 20 40 Temperature 60 80 0 100 1 2 3 4 5 VCOM (V) (O C) Logic Threshold Voltage vs. Supply Voltage TURN-ON/OFF Time vs. Supply Voltage 2.5 100 2.0 80 IN ramping up 1.5 IN ramping down 1.0 70 60 50 TO N 40 30 20 0.5 T OFF 10 0 2 3 0 4 Supply Voltage (V) 10 TON/TOFF(nS) Logic Threshold Voltage(V) 90 5 6 2 IN ramping down 3 4 5 6 VSUPPLY (V) Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 TON/TOFF vs. Temperature 50 45 V+=5V VNO or VNC =3V TO N 40 T ON/T OFF (nS) 35 30 25 20 T OFF 15 10 5 0 -40 -20 0 20 40 60 80 100 Temperature (OC) Rev.H.03 11 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Date Code Rule Marking Date Code Year A A A W W xxx0 A A A W W xxx1 A A A W W xxx2 A A A W W xxx3 A A A W W xxx4 A A A W W xxx5 A A A W W xxx6 A A A W W xxx7 A A A W W xxx8 A A A W W xxx9 n Tape & Reel Dimension SOT-26 P W AME AME PIN 1 Carrier Tape, Number of Components Per Reel and Reel Size 12 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size SOT-26 8.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm Rev.H.03 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Tape & Reel Dimension TSOT-26 P W AME AME PIN 1 Carrier Tape, Number of Components Per Reel and Reel Size Rev.H.03 Package Carrier Width (W) Pitch (P) Part Per Full Reel Reel Size TSOT-26 8.0±0.1 mm 4.0±0.1 mm 3000pcs 180±1 mm 13 AME 1-Ohm Low Voltage SPDT Analog Switch AME4624/4625 n Package Dimension TSOT-26 Top View Side View θ1 SYMBOLS MILLIMETERS INCHES MIN MAX MIN MAX A+A1 0.90 1.25 0.0354 0.0492 b 0.30 0.50 0.0118 0.0197 c 0.09 0.25 0.0035 0.0098 D 2.70 3.10 0.1063 0.1220 E 1.40 1.80 0.0551 0.0709 E H D e L S1 1.90 BSC e H Front View 2.40 A 3.00 0.35BSC L θ1 0.07480 BSC 0 o 10 0.09449 0.11811 0.0138BSC o 0o 10o 0.95BSC 0.0374BSC MILLIMETERS INCHES A1 S1 b SOT-26 Top View Side View D e θ1 SYMBOLS MIN 1.20REF E H A L S1 MAX 0.0472REF 0.00 0.15 0.0000 0.0059 b 0.30 0.55 0.0118 0.0217 D 2.70 3.10 0.1063 0.1220 E 1.40 1.80 0.0551 0.0709 H 1.90 BSC 2.60 θ1 3.00 0 o 10 0.95REF 0.10236 0.11811 0.0146REF o 0o 10o 0.0374REF A1 S1 0.0748 BSC 0.37REF L A MIN A1 e Front View MAX b 14 Rev.H.03 www.ame.com.tw E-Mail: [email protected] Life Support Policy: These products of AME, Inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of AME, Inc. AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. AME, Inc. , November 2008 Document: 2079-DS4624/4625-H.03 Corporate Headquarter AME, Inc. 2F, 302 Rui-Guang Road, Nei-Hu District Taipei 114, Taiwan . Tel: 886 2 2627-8687 Fax: 886 2 2659-2989