J104 RoHS Compliant 20.0 (21.0) x 9.8 x 10.8 mm E197851 Features • • • • High sensitivity, super light weight Conforms to FCC part 68 PC board mounting Available bifurcated contacts for high reliability Contact Data Dimensions shown in mm. Dimensions are shown for reference purposes only. Specifications and availability subject to change without notice. J104A & J104B - Bifurcated Contacts Standard Version J104C - Bifurcated Contacts Low Cost Version Contact Arrangement 2C = DPDT 2C = DPDT Contact Rating 2A @ 30VDC 1A @ 24VDC 3A @ 30VDC N.O. 1A @ 125VAC .6A @ 125VAC Contact Resistance < 50 milliohms initial < 50 milliohms initial Contact Material AgNi + Au clad Ag Maximum Switching Power 60W, 75VA 24W, 125VA Maximum Switching Voltage 250VAC, 220VDC 250VAC, 220VDC Maximum Switching Current 3A 3A Coil Data Coil Voltage VDC Rated Max Coil Resistance Ω +/- 10% .15W .20W .36W .40W Pick Up Voltage Release Voltage VDC (max) VDC (min) .51W .55W 75% of rated voltage 10% of rated voltage 3 3.9 60 45 25 23 17.6 16 2.25 .3 5 6.5 167 125 56 63 39.7 45 3.75 .5 6 7.8 240 180 70 90 49 66 4.50 .6 9 11.7 540 405 100 203 70.6 140 6.75 .9 12 15.6 960 720 400 360 282 280 9.00 1.2 24 31.2 N/A 2880 1600 1440 1129 1070 18.00 1.2 48 62.4 N/A 11.5K N/A 5760 4518 3900 36.00 4.8 Coil Power W Operate Time ms Release Time ms .15 .20 .36 .40 .51 .55 4.5 1.5 General Data Electrical Life @ rated load 500K cycles, typical Mechanical Life 100M cycles, typical Insulation Resistance 100M Ω min. @ 500VDC Dielectric Strength, Coil to Contact 1500V rms min. @ sea level Contact to Contact Shock Resistance 1000V rms min. @ sea level 100m/s2 for 11 ms Vibration Resistance 1.50mm double amplitude 10~40Hz Terminal (Copper Alloy) Strength 5N Operating Temperature -40oC to +85oC Storage Temperature -40oC to +155oC Solderability 260oC for 5 s Weight 4.5g Caution 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. page 29 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 J104 Ordering Information 1. Series J104 2C 12VDC .55 S J104A **.40W, .55W coil power only J104B **.15W, .20W coil power only J104C **.20W, .36W, .51W coil power only 2. Contact Arrangement 2C = DPDT 4. Coil Power J104A .40 = .40W .55 = .55W J104B .15 = .15W .20 = .20W Dimensions shown in mm. Dimensions are shown for reference purposes only. 3. Coil Voltage 3VDC 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC J104C .20 = .20W .36 = .36W .51 = .51W 5. Sealed S = Sealed (standard) Dimensions Units = mm J104C Schematics & PC Layouts Bottom Views page 30 www.citrelay.com phone - 763.535.2339 fax - 763.535.2194 Specifications and availability subject to change without notice. J104A & J104B