KL SPECIFICATIONS Electrical Ratings Electrical Life Contact Resistance Actuation Force Actuator Travel Dielectric Strength Insulation Resistance Operating Temperature Storage Temperature Switch: 25mA @ 24VDC Carry: 100mA @ 24VDC 2,000 cycles typical < 25 mΩ initial 400 gF max 2.0 mm 500Vrms min > 100MΩ min -40°C to 85°C -40°C to 85°C .100” Pitch, Low Profile DIP Switch MATERIALS ←RoHS COMPLIANT Actuator Cover Housing Contacts Terminals 4/6 Nylon, UL94V-0, White PPS, UL94V-0, Black PPS, UL94V-0, Black Phosphor Bronze, Gold over Nickel Plated Brass, Gold over Nickel Plated ORDERING INFORMATION Series: KL 02 E H KL Number of Positions: 02 = 2 positions 03 = 3 positions 04 = 4 positions 05 = 5 positions 06 = 6 positions 07 = 7 positions 08 = 8 positions 09 = 9 positions 10 = 10 positions 12 = 12 positions Actuator Height: E = Extended R = Recessed Terminal Options: S = Splayed H = Straight Tape Seal: Blank = No Tape Seal T = Tape Seal (only available with R actuator) T www.citswitch.com page 113 phone – 763.535.2339 fax – 763.535.2194 KL DIMENSIONS Number of Positions 02 03 04 05 06 07 08 09 10 12 “A” mm 6.08 8.72 11.90 14.44 16.98 19.52 22.06 24.60 27.14 32.22 “B” mm 2.54 6.08 8.62 11.16 13.70 16.24 19.78 22.32 24.86 29.94 SCHEMATIC & PC LAYOUT ACTUATOR OPTIONS E ACTUATOR R ACUTATOR TERMINAL OPTIONS H = STRAIGHT S = SPLAYED PACKAGING SPECIFICATIONS All switches packaged in OFF position Tube packaging standard www.citswitch.com page 114 phone – 763.535.2339 fax – 763.535.2194