Document 285-1 Chip ChipInductors Inductors--0604SMS 0604HQ Series (1610) • Combines the exceptionally high Q of an air core inductor with the rugged construction of a ceramic body component. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. • Provides intermediate inductance values not available in Coilcraft’s 0603, 0402 or 0906 product families Part number1 0604HQ-1N1XJL_ 0604HQ-2N6XJL_ 0604HQ-4N5XJL_ 0604HQ-5N0XJL_ 0604HQ-6N8XJL_ 0604HQ-7N6XJL_ 0604HQ-10NXJL_ Inductance2 (nH) 1.15 2.6 4.5 5.0 6.8 7.6 10.4 Percent tolerance3 5 5 5 5 5 5 5 Q 900 MHz min4 L typ Q typ 25 1.2 40 45 2.6 78 50 4.5 103 60 4.9 106 60 6.9 101 60 7.4 109 60 10.6 103 1.7 GHz L typ Q typ 1.2 136 2.6 163 4.7 155 5.2 178 7.4 172 7.9 137 11.5 160 SRF DCR min5 max6 Irms7 Color (GHz) (Ohms) (A) code 12.3 0.021 3.0 Black 9.3 0.026 2.0 Brown 5.8 0.032 1.8 Red 5.3 0.032 1.6 Orange 4.7 0.035 1.8 Yellow 4.4 0.035 1.5 Green 4.1 0.037 1.5 Blue 1. When ordering, please specify termination and packaging codes: Designer’s Kit C351 contains 10 each of all values 0604HQ-10NXJLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. 2. Inductance measured at 500 MHz using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/ HP 16193 test fixture. 5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. 9. Temperature coefficient of inductance: +25 to +125 ppm/°C. See Qualification Standards section for environmental and test data. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 4.6 – 5.6 g Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +126 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) One per billion hours / one billion hours, calculated per Telcordia SR-332 Packaging 2000 per 7″reel; Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.27 mm pocket depth PCB washing Only pure water or alcohol recommended Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 285-1 Revised 10/06/08 Document 285-2 0604HQ Series (1610) Typical Q vs Frequency Typical L vs Frequency 220 10.4 nH 200 6.8 nH 12 10.4 nH 4.5 nH Q Factor 160 140 120 100 1.1 nH 80 60 Inductance (nH) 180 7.6 nH 6.8 nH 8 5.0 nH 4.5 nH 4 2.6 nH 40 20 1.1 nH 0 0 1 10 100 1000 10000 1 10 100 1000 10000 Frequency (MHz) Frequency (MHz) Irms Derating B overall 120 H C I F 110 J 90 F 80 E terminal 70 I D Recommended Land Pattern Terminal wraparound: approx 0.007/0,18 both ends 60 50 A B C D max max max ref E F G H I J 0.073 0.054 0.047 0.025 0.040 0.013 0.034 0.053 0.025 0.025 inches 40 30 25°C Percent of rated Irms G A 100 20 1,85 1,37 1,19 0,64 1,02 0,33 0,86 1,35 0,63 0,63 mm 10 0 -40 -20 0 20 40 60 80 100 120 140 Ambient temperature (°C) Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 285-2 Revised 10/06/08