Document 685-1 Power Inductor – GA3199-AL For ON Semiconductor NCP1654 PFC Controller • Designed for ON Semiconductor for their 300 Watt, wide mains, PFC stage, driven by the NCP1654 PFC Controller • Shown as L1 on Application Note AND8324/D • High inductance: 650 µH; high saturating current: 6.3 A Core material Ferrite Terminations RoHS compliant tin-silver over tin over nickel over phos bronxe. Other terminations available at additional cost. Weight 94 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +85°C. Packaging: –40°C to +80°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 26,315,789 hours Packaging 20 per tray PCB washing Only pure water or alcohol recommended Part number GA3199-AL Inductance1 ±10% (µH) 650 DCR max (Ohm) SRF typ2 (kHz) 0.165 770 10% drop 5.8 Isat (A)3 20% drop 30% drop 6.1 6.3 Irms (A)4 20°C rise 40°C rise 2.9 3.8 1. Inductance measured at 10 kHz, 0.1 Vrms, 0 Adc. 2. SRF measured on an Agilent/ HP 4192A impedance analyzer or equivalent 3. DC current at which the inductance drops the specified amount from its value without current. 4. Current that causes the specified temperature rise from 25°C ambient. 5. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 Document 685-1 Revised 01/15/09 Document 685-2 Power Inductor – GA3199-AL Inductance vs Current Inductance vs Frequency 10000 Inductance (µH) Inductance (µH) 10000 1000 1000 100 10 100 10 0.1 10 1 100 1 1000 Frequency (kHz) Irms Derating 5 Dot indicates pin 1 12 120 2 110 2 GA3199-AL CCI xxxx 100 90 1.670 max 42,40 5 80 7 70 1.791 max 45,50 60 50 40 1.181 max 30,00 25°C Percent of rated Irms 100 10 Current (A) 30 20 10 1.400 35,56 0 -40 -20 0 20 40 60 80 100 120 140 Recommended PC Board Layout 0.130 3,30 0.039 ∅ 1,00 Ambient temperature (°C) 1.400 35,56 0.300 7,62 12 2 10 3 4 5 2 Dimensions are in 0.200 5,08 inches mm Specifications subject to change without notice. Please check our website for latest information. © Coilcraft, Inc. 2009 9 0.400 10,16 7 0.063 ∅ 1.60 Pins 1,6,8 and 11 are removed during manufacture Document 685-2 Revised 01/15/09