Crystek POCKET Passive Doubler Part Number: CPPD-0.85-2 Input Freq. Range 0.85-2.0 GHz y ies c w n e e N qu r Ser e lie r F tip l u M Features: Input Drive Level: +10dBm to +20dBm Conversion Loss: 15dB typical Isolation (Fo, 3Fo, 4Fo): 33dB typical Small In-Line SMA Package Input Frequency Range 0.85 to 2.0 GHz Output Frequency Range 1.7 to 4.0 GHz Actual Size Maximum Ratings: +27dBm Operating Temp.: -40°C to 85°C Storage Temp.: -55°C to 100°C Crystek’s new line of frequency doublers are designed in a rugged SMA housing. The CPPD-0.85-2 will accept an input frequency from 0.85 to 2.0 GHz and multiply by a factor of two to achieve output frequencies from 1.7 to 4.0 GHz. Designed for Test Equipment and General Lab Use. Rev.: A Date: 09-09-08 Crystek POCKET Passive Doubler Conversion Loss @ +13dBm Input Level Conversion Loss @ +11dBm Input Level 0 0 Ͳ5 Ͳ5 Ͳ10 Ͳ10 Ͳ15 Conversion Loss (dB) Conversion Loss (dB) Ͳ13 Ͳ15 Ͳ15 Ͳ17 Ͳ18 Ͳ20 Ͳ23 Ͳ25 Ͳ14 Ͳ15 Ͳ18 Ͳ20 Ͳ25 Ͳ30 Ͳ30 Ͳ35 Ͳ30 Ͳ35 Ͳ35 Ͳ40 Ͳ40 Ͳ45 Ͳ40 Ͳ45 Ͳ45 Ͳ50 1GHz 2GHz 3GHz 4GHz 5GHz 1GHz 6GHz 2GHz 3GHz 4GHz 5GHz 6GHz Output Frequency Output Frequency Conversion Loss @ +17dBm Input Level Conversion Loss @ +15dBm Input Level 0 0 Ͳ5 Ͳ5 Ͳ10 Ͳ13 Ͳ14 Conversion Loss (dB) Conversion Loss (dB) Ͳ10 Ͳ15 Ͳ14 Ͳ17 Ͳ20 Ͳ13 Ͳ15 Ͳ14 Ͳ14 Ͳ17 Ͳ20 Ͳ25 Ͳ22 Ͳ26 Ͳ25 Ͳ24 Ͳ30 Ͳ30 Ͳ30 Ͳ35 1GHz 2GHz 3GHz 4GHz 5GHz 1GHz 6GHz 2GHz 3GHz 4GHz 5GHz 6GHz Output Frequency Output Frequency Isolation vs. Input Level (+15dBm) Ͳ25 1.312 (33.34) Ͳ30 0.612 (15.54) ISOLATION (dB) Ͳ35 Ͳ40 Signal Out 1F0 3F0 Ͳ45 ×2 0.435 (11.05) Signal In Ͳ50 SMA Male Ͳ55 SMA Female Ͳ60 1GHz 2GHz 3GHz 4GHz 5GHz 6GHz Rev.: A Date: 09-09-08