Common Mode Chokes - Radial CTUF0917H Series From 0.2 mH to 10 mH ctparts.com SPECIFICATIONS * Indicates the inductance difference between the coil L1 and L2. Inductance (Min.) (mH) Inductance Difference* (µH Max.) CTUF0917H-103MR25 10 200 3.5 0.25 CTUF0917H-282M0R5 CTUF0917H-132M0R7 2.8 1.3 50 50 1.0 0.5 0.5 0.7 CTUF0917H-601M1R0 CTUF0917H-201M1R6 0.6 0.2 25 25 0.2 0.1 1.0 1.6 Part Number DCR (Max.) (W W) Rated Current (Max.) (A) Not shown at actual size. PHYSICAL DIMENSIONS 3 7±0.5(.276±.020) 15.5(.610)Max. 2 17.5(.689)Max. 13.0(.512)Max. 4±1(.157±.039) CHARACTERISTICS Description: Common mode choke coils. Applications: For power supply line. Rated Voltage: 250Vac Operating Temperature Range: -20°C to +105°C including self temperature rise. Temperature Rise: 45°C maximum each line. Dielectric Withstanding Voltage: 2000Vac between each winding for 1 minute. Insulation Resistance: 100Mohm minimum between each winding for 1 minute. Additional Information: Additional electrical & physical information available upon request. Different inductance and current products are available as well. Samples available. See website for ordering information. 4 L1 2 ø0.6(.024) Technologies Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2004 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 1 4 1 10.01.03 CENTRAL 8±0.5(.315±.020) L2 3 Dimensions in mm (inches)