EPCOS B57885S

NTC thermistors for
temperature measurement
Leaded NTC thermistors,
lead spacing 5 mm
Series/Type:
B57885S
Date:
February 2009
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures hereto and the
information contained therein without EPCOS' prior express consent is prohibited.
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
Applications
Temperature measurement and
compensation
S885
Dimensional drawing
Features
High measuring accuracy
Cost-effective
Rugged design, epoxy resin encapsulation
Tinned copper leads
Lead spacing 5 mm
Options
Flexible coating of head and wires available
on request
Delivery mode
Bulk (standard), cardboard tape, reeled or in
Ammo pack on request
Dimensions in mm
Approx. weight 130 mg
General technical data
Climatic category
(IEC 60068-1)
Max. power
(at 25 °C)
55/155/56
P25
100
mW
Resistance tolerance
∆RR/RR
±1, ±3, ±5
%
Rated temperature
TR
25
°C
Dissipation factor
(in air)
δth
approx. 4
mW/K
Thermal cooling time constant
(in air)
τc
approx. 10
s
Cth
approx. 40
mJ/K
Heat capacity
Electrical specification and ordering codes
R25
Ω
2.1 k
10 k
10 k
10 k
12 k
30 k
No. of R/T
characteristic
1008
2003
2908
2001
2901
8018
B25/100
K
3560 ±1%
3980 ±1%
3460 ±1%
3920 ±1%
3760 ±1%
3964 ±1%
+ = Resistance tolerance
F = ±1%
H = ±3%
J = ±5%
Please read Cautions and warnings and
Important notes at the end of this document.
Page 2 of 33
Ordering code
B57885S0212+000
B57885S0103+001
B57885S0103+002
B57885S0103+003
B57885S0123+000
B57885S0303+000
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Reliability data
Test
Standard
Storage in
dry heat
IEC
60068-2-2
Storage in damp
heat, steady state
Rapid temperature
cycling
Endurance
Long-term stability
(empirical value)
R/T characteristics
Test conditions
Storage at upper
category temperature
T: 155 °C
t: 1000 h
IEC
Temperature of air: 40 °C
60068-2-78 Relative humidity of air: 93%
Duration: 56 days
IEC
Lower test temperature: 55 °C
60068-2-14 Upper test temperature: 155 °C
Number of cycles: 100
Pmax: 100 mW
t: 1000 h
Temperature: 70 °C
t: 10000 h
∆R25/R25
(typical)
< 2%
Remarks
< 1%
No visible
damage
< 2%
No visible
damage
< 3%
No visible
damage
No visible
damage
< 3%
No visible
damage
B57885S0212F000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
111520
82567
61583
46263
34999
105460
78386
58680
44237
33579
117570
86747
64486
48289
36420
5.4
5.1
4.7
4.4
4.1
0.9
0.8
0.8
0.8
0.7
6.1
6.0
5.8
5.7
5.5
30.0
25.0
20.0
15.0
10.0
26661
20423
15786
12254
9594
25661
19717
15285
11899
9341
27661
21128
16287
12609
9847
3.8
3.5
3.2
2.9
2.6
0.7
0.7
0.6
0.6
0.5
5.4
5.2
5.1
4.9
4.8
5.0
0.0
5.0
10.0
15.0
7570
6020
4811
3872
3133
7390
5891
4719
3807
3087
7751
6149
4902
3937
3179
2.4
2.1
1.9
1.7
1.5
0.5
0.5
0.4
0.4
0.4
4.7
4.5
4.4
4.3
4.1
20.0
25.0
30.0
35.0
40.0
2552
2100
1742
1441
1199
2520
2079
1721
1421
1180
2584
2121
1764
1462
1219
1.3
1.0
1.2
1.4
1.6
0.3
0.3
0.3
0.4
0.5
4.0
3.9
3.8
3.7
3.6
45.0
50.0
1008
851.4
1026
868.2
1.8
2.0
0.5
0.6
3.5
3.4
R/T No.
T (°C)
990.2
834.6
Please read Cautions and warnings and
Important notes at the end of this document.
Page 3 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
R/T No.
T (°C)
55.0
60.0
65.0
S885
B57885S0212F000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
717.6
702.2
732.9
2.1
0.6
608.0
594.0
622.0
2.3
0.7
519.0
506.2
531.8
2.5
0.8
α (%/K)
3.3
3.2
3.1
70.0
75.0
80.0
85.0
90.0
444.8
382.1
329.3
285.4
248.3
433.2
371.5
319.7
276.7
240.4
456.5
392.6
338.9
294.1
256.2
2.6
2.8
2.9
3.1
3.2
0.9
0.9
1.0
1.1
1.2
3.1
3.0
2.9
2.8
2.8
95.0
100.0
105.0
110.0
115.0
217.1
190.6
167.2
147.2
130.0
209.9
184.0
161.3
141.8
125.0
224.3
197.1
173.2
152.7
134.9
3.3
3.4
3.6
3.7
3.8
1.2
1.3
1.4
1.5
1.6
2.7
2.6
2.6
2.5
2.4
120.0
125.0
130.0
135.0
140.0
115.0
102.3
91.17
81.32
72.69
110.5
98.14
87.38
77.85
69.51
119.6
106.4
94.96
84.79
75.87
3.9
4.0
4.2
4.3
4.4
1.6
1.7
1.8
1.9
2.0
2.4
2.3
2.3
2.2
2.2
145.0
150.0
155.0
65.20
58.61
52.91
62.28
55.93
50.43
68.12
61.29
55.38
4.5
4.6
4.7
2.1
2.2
2.3
2.1
2.1
2.0
B57885S0212H000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
111520
82567
61583
46263
34999
103230
76735
57449
43312
32879
119800
88399
65717
49214
37120
7.4
7.1
6.7
6.4
6.1
1.2
1.2
1.2
1.1
1.1
6.1
6.0
5.8
5.7
5.5
30.0
25.0
20.0
15.0
10.0
26661
20423
15786
12254
9594
25128
19308
14969
11654
9149
28194
21537
16602
12854
10039
5.8
5.5
5.2
4.9
4.6
1.1
1.0
1.0
1.0
1.0
5.4
5.2
5.1
4.9
4.8
5.0
0.0
5.0
10.0
15.0
7570
6020
4811
3872
3133
7238
5770
4622
3729
3025
7903
6269
4999
4014
3242
4.4
4.1
3.9
3.7
3.5
0.9
0.9
0.9
0.9
0.8
4.7
4.5
4.4
4.3
4.1
20.0
25.0
30.0
2552
2100
1742
2469
2037
1686
2635
2163
1799
3.3
3.0
3.2
0.8
0.8
0.9
4.0
3.9
3.8
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 4 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
R/T No.
T (°C)
35.0
40.0
S885
B57885S0212H000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
1441
1392
1491
3.4
0.9
1199
1156
1243
3.6
1.0
α (%/K)
3.7
3.6
45.0
50.0
55.0
60.0
65.0
1008
851.4
717.6
608.0
519.0
970.0
817.6
687.9
581.8
495.8
1047
885.3
747.3
634.2
542.2
3.8
4.0
4.1
4.3
4.5
1.1
1.2
1.2
1.3
1.4
3.5
3.4
3.3
3.2
3.1
70.0
75.0
80.0
85.0
90.0
444.8
382.1
329.3
285.4
248.3
424.3
363.9
313.1
271.0
235.4
465.4
400.3
345.5
299.8
261.1
4.6
4.8
4.9
5.1
5.2
1.5
1.6
1.7
1.8
1.9
3.1
3.0
2.9
2.8
2.8
95.0
100.0
105.0
110.0
115.0
217.1
190.6
167.2
147.2
130.0
205.6
180.2
157.9
138.8
122.4
228.7
200.9
176.6
155.6
137.5
5.3
5.4
5.6
5.7
5.8
2.0
2.1
2.2
2.3
2.4
2.7
2.6
2.6
2.5
2.4
120.0
125.0
130.0
135.0
140.0
115.0
102.3
91.17
81.32
72.69
108.2
96.10
85.56
76.22
68.06
121.9
108.5
96.79
86.41
77.33
5.9
6.0
6.2
6.3
6.4
2.5
2.6
2.7
2.8
2.9
2.4
2.3
2.3
2.2
2.2
145.0
150.0
155.0
65.20
58.61
52.91
60.98
54.76
49.37
69.42
62.47
56.44
6.5
6.6
6.7
3.0
3.2
3.3
2.1
2.1
2.0
B57885S0212J000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
111520
82567
61583
46263
34999
101000
75084
56217
42387
32179
122030
90050
66949
50139
37820
9.4
9.1
8.7
8.4
8.1
1.5
1.5
1.5
1.5
1.5
6.1
6.0
5.8
5.7
5.5
30.0
25.0
20.0
15.0
10.0
26661
20423
15786
12254
9594
24595
18900
14654
11408
8957
28728
21945
16918
13100
10231
7.8
7.5
7.2
6.9
6.6
1.4
1.4
1.4
1.4
1.4
5.4
5.2
5.1
4.9
4.8
5.0
0.0
5.0
10.0
7570
6020
4811
3872
7087
5650
4526
3652
8054
6389
5095
4092
6.4
6.1
5.9
5.7
1.4
1.4
1.3
1.3
4.7
4.5
4.4
4.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 5 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
R/T No.
T (°C)
15.0
S885
B57885S0212J000
1008
B25/100 = 3560 K, R25 = 2100 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
3133
2962
3304
5.5
1.3
20.0
25.0
30.0
35.0
40.0
2552
2100
1742
1441
1199
45.0
50.0
55.0
60.0
65.0
1008
851.4
717.6
608.0
519.0
70.0
75.0
80.0
85.0
90.0
2418
1995
1651
1363
1132
α (%/K)
4.1
2687
2205
1834
1520
1267
5.3
5.0
5.2
5.4
5.6
1.3
1.3
1.4
1.5
1.6
4.0
3.9
3.8
3.7
3.6
949.8
800.6
673.5
569.7
485.5
1067
902.3
761.6
646.3
552.5
5.8
6.0
6.1
6.3
6.5
1.7
1.8
1.9
2.0
2.1
3.5
3.4
3.3
3.2
3.1
444.8
382.1
329.3
285.4
248.3
415.4
356.2
306.5
265.3
230.4
474.3
407.9
352.0
305.5
266.1
6.6
6.8
6.9
7.1
7.2
2.2
2.3
2.4
2.5
2.6
3.1
3.0
2.9
2.8
2.8
95.0
100.0
105.0
110.0
115.0
217.1
190.6
167.2
147.2
130.0
201.2
176.4
154.6
135.9
119.8
233.0
204.8
179.9
158.5
140.1
7.3
7.4
7.6
7.7
7.8
2.7
2.8
3.0
3.1
3.2
2.7
2.6
2.6
2.5
2.4
120.0
125.0
130.0
135.0
140.0
115.0
102.3
91.17
81.32
72.69
105.9
94.05
83.73
74.59
66.61
124.2
110.5
98.61
88.04
78.78
7.9
8.0
8.2
8.3
8.4
3.3
3.4
3.6
3.7
3.8
2.4
2.3
2.3
2.2
2.2
145.0
150.0
155.0
65.20
58.61
52.91
59.67
53.58
48.32
70.73
63.64
57.50
8.5
8.6
8.7
4.0
4.1
4.3
2.1
2.1
2.0
B57885S0103F001
2003
B25/100 = 3980 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
975780
676500
475380
338310
243590
917770
639050
450920
322170
232840
1033800
713960
499840
354460
254340
5.9
5.5
5.1
4.8
4.4
0.8
0.8
0.7
0.7
0.7
7.4
7.2
6.9
6.7
6.5
30.0
25.0
20.0
15.0
177530
130670
97228
73006
170310
125780
93900
70729
184760
135550
100560
75282
4.1
3.7
3.4
3.1
0.7
0.6
0.6
0.6
6.2
6.0
5.8
5.6
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 6 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
R/T No.
T (°C)
10.0
S885
B57885S0103F001
2003
B25/100 = 3980 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
55361
53797
56925
2.8
0.5
α (%/K)
5.5
5.0
0.0
5.0
10.0
15.0
42332
32660
25392
19902
15709
41256
31918
24881
19552
15472
43409
33402
25902
20251
15947
2.5
2.3
2.0
1.8
1.5
0.5
0.4
0.4
0.4
0.3
5.3
5.1
5.0
4.8
4.7
20.0
25.0
30.0
35.0
40.0
12492
10000
8057
6533
5329
12332
9900
7955
6436
5239
12652
10100
8160
6629
5419
1.3
1.0
1.3
1.5
1.7
0.3
0.2
0.3
0.4
0.4
4.5
4.4
4.3
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4372
3606
2991
2493
2089
4289
3531
2923
2432
2034
4454
3682
3059
2554
2144
1.9
2.1
2.3
2.5
2.6
0.5
0.5
0.6
0.7
0.8
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
1758
1486
1262
1076
921.6
1709
1442
1223
1041
889.9
1807
1530
1302
1112
953.3
2.8
3.0
3.1
3.3
3.4
0.8
0.9
1.0
1.0
1.1
3.4
3.3
3.2
3.1
3.1
95.0
100.0
105.0
110.0
115.0
792.2
683.6
592.5
515.3
449.2
763.8
658.0
569.5
494.6
430.6
820.7
709.1
615.4
536.0
467.8
3.6
3.7
3.9
4.0
4.1
1.2
1.3
1.4
1.4
1.5
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
392.8
343.9
301.9
266.5
235.9
376.0
328.7
288.2
254.1
224.7
409.6
359.0
315.5
278.9
247.2
4.3
4.4
4.5
4.6
4.8
1.6
1.7
1.8
1.9
2.0
2.7
2.6
2.5
2.5
2.4
145.0
150.0
155.0
209.3
186.2
166.1
199.1
176.9
157.6
219.5
195.5
174.6
4.9
5.0
5.1
2.1
2.2
2.3
2.4
2.3
2.3
R/T No.
T (°C)
55.0
50.0
45.0
40.0
B57885S0103H001
2003
B25/100 = 3980 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
975780
676500
475380
338310
7.4
7.2
6.9
6.7
898250
625520
441410
315400
Please read Cautions and warnings and
Important notes at the end of this document.
1053300
727490
509350
361220
7.9
7.5
7.1
6.8
Page 7 of 33
1.1
1.0
1.0
1.0
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
35.0
B57885S0103H001
2003
B25/100 = 3980 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
243590
227970
259210
6.4
1.0
α (%/K)
6.5
30.0
25.0
20.0
15.0
10.0
177530
130670
97228
73006
55361
166760
123170
91956
69269
52689
188310
138170
102500
76742
58032
6.1
5.7
5.4
5.1
4.8
1.0
1.0
0.9
0.9
0.9
6.2
6.0
5.8
5.6
5.5
5.0
0.0
5.0
10.0
15.0
42332
32660
25392
19902
15709
40409
31265
24374
19154
15157
44256
34055
26410
20649
16261
4.5
4.3
4.0
3.8
3.5
0.9
0.8
0.8
0.8
0.8
5.3
5.1
5.0
4.8
4.7
20.0
25.0
30.0
35.0
40.0
12492
10000
8057
6533
5329
12083
9700
7794
6305
5132
12901
10300
8321
6760
5526
3.3
3.0
3.3
3.5
3.7
0.7
0.7
0.8
0.8
0.9
4.5
4.4
4.3
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4372
3606
2991
2493
2089
4202
3459
2863
2382
1992
4542
3754
3119
2604
2185
3.9
4.1
4.3
4.5
4.6
1.0
1.1
1.2
1.2
1.3
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
1758
1486
1262
1076
921.6
1673
1412
1197
1019
871.5
1842
1560
1327
1133
971.7
4.8
5.0
5.1
5.3
5.4
1.4
1.5
1.6
1.7
1.8
3.4
3.3
3.2
3.1
3.1
95.0
100.0
105.0
110.0
115.0
792.2
683.6
592.5
515.3
449.2
748.0
644.4
557.7
484.3
421.6
836.5
722.8
627.3
546.3
476.8
5.6
5.7
5.9
6.0
6.1
1.9
2.0
2.1
2.2
2.3
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
392.8
343.9
301.9
266.5
235.9
368.2
321.9
282.2
248.8
220.0
417.5
365.9
321.6
284.2
251.9
6.3
6.4
6.5
6.6
6.8
2.4
2.5
2.6
2.7
2.8
2.7
2.6
2.5
2.5
2.4
145.0
150.0
155.0
209.3
186.2
166.1
194.9
173.1
154.3
223.7
199.2
177.9
6.9
7.0
7.1
2.9
3.0
3.1
2.4
2.3
2.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 8 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103J001
2003
B25/100 = 3980 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
975780
676500
475380
338310
243590
878740
611990
431900
308640
223100
1072800
741020
518850
367990
264080
9.9
9.5
9.1
8.8
8.4
1.3
1.3
1.3
1.3
1.3
7.4
7.2
6.9
6.7
6.5
30.0
25.0
20.0
15.0
10.0
177530
130670
97228
73006
55361
163210
120550
90011
67809
51582
191860
140780
104450
78202
59140
8.1
7.7
7.4
7.1
6.8
1.3
1.3
1.3
1.3
1.3
6.2
6.0
5.8
5.6
5.5
5.0
0.0
5.0
10.0
15.0
42332
32660
25392
19902
15709
39562
30612
23866
18756
14843
45102
34708
26918
21047
16575
6.5
6.3
6.0
5.8
5.5
1.2
1.2
1.2
1.2
1.2
5.3
5.1
5.0
4.8
4.7
20.0
25.0
30.0
35.0
40.0
12492
10000
8057
6533
5329
11833
9500
7633
6174
5026
13151
10500
8482
6891
5632
5.3
5.0
5.3
5.5
5.7
1.2
1.1
1.2
1.3
1.4
4.5
4.4
4.3
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4372
3606
2991
2493
2089
4114
3387
2803
2332
1950
4629
3826
3178
2654
2227
5.9
6.1
6.3
6.5
6.6
1.5
1.6
1.7
1.8
1.9
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
1758
1486
1262
1076
921.6
1638
1383
1172
997.9
853.0
1877
1590
1352
1155
990.1
6.8
7.0
7.1
7.3
7.4
2.0
2.1
2.2
2.3
2.4
3.4
3.3
3.2
3.1
3.1
95.0
100.0
105.0
110.0
115.0
792.2
683.6
592.5
515.3
449.2
732.1
630.7
545.8
474.0
412.6
852.4
736.4
639.1
556.6
485.8
7.6
7.7
7.9
8.0
8.1
2.5
2.6
2.8
2.9
3.0
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
392.8
343.9
301.9
266.5
235.9
360.3
315.0
276.1
243.5
215.3
425.3
372.8
327.6
289.5
256.6
8.3
8.4
8.5
8.6
8.8
3.1
3.2
3.4
3.5
3.6
2.7
2.6
2.5
2.5
2.4
145.0
150.0
155.0
209.3
186.2
166.1
190.7
169.4
151.0
227.9
202.9
181.2
8.9
9.0
9.1
3.8
3.9
4.0
2.4
2.3
2.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 9 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103F002
2908
B25/100 = 3460 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
453130
337290
253330
191910
146590
429090
320600
241650
183680
140770
477170
353990
265010
200130
152420
5.3
5.0
4.6
4.3
4.0
0.9
0.9
0.8
0.8
0.7
6.0
5.8
5.6
5.5
5.3
30.0
25.0
20.0
15.0
10.0
112880
87588
68471
53910
42739
108730
84620
66339
52375
41631
117030
90556
70602
55446
43848
3.7
3.4
3.1
2.8
2.6
0.7
0.7
0.6
0.6
0.6
5.1
5.0
4.9
4.7
4.6
5.0
0.0
5.0
10.0
15.0
34109
27396
22140
17999
14716
33308
26817
21722
17699
14502
34910
27974
22557
18298
14930
2.3
2.1
1.9
1.7
1.5
0.5
0.5
0.4
0.4
0.4
4.4
4.3
4.2
4.1
4.0
20.0
25.0
30.0
35.0
40.0
12099
10000
8308
6936
5819
11948
9900
8205
6837
5725
12250
10100
8411
7035
5912
1.2
1.0
1.2
1.4
1.6
0.3
0.3
0.3
0.4
0.5
3.9
3.8
3.7
3.6
3.5
45.0
50.0
55.0
60.0
65.0
4904
4151
3529
3012
2582
4816
4070
3454
2944
2519
4991
4232
3603
3081
2644
1.8
1.9
2.1
2.3
2.4
0.5
0.6
0.7
0.7
0.8
3.4
3.3
3.2
3.1
3.0
70.0
75.0
80.0
85.0
90.0
2221
1918
1663
1446
1262
2164
1866
1615
1403
1222
2278
1970
1710
1489
1301
2.6
2.7
2.9
3.0
3.1
0.9
0.9
1.0
1.1
1.2
3.0
2.9
2.8
2.8
2.7
95.0
100.0
105.0
110.0
115.0
1105
970.2
854.6
755.1
669.0
1069
937.4
824.7
727.7
644.0
1141
1003
884.6
782.4
694.0
3.3
3.4
3.5
3.6
3.7
1.2
1.3
1.4
1.5
1.6
2.6
2.6
2.5
2.4
2.4
120.0
125.0
130.0
135.0
140.0
594.4
529.5
472.9
423.4
380.0
571.5
508.5
453.6
405.7
363.8
617.3
550.5
492.2
441.1
396.3
3.9
4.0
4.1
4.2
4.3
1.6
1.7
1.8
1.9
2.0
2.3
2.3
2.2
2.2
2.1
145.0
150.0
155.0
341.9
308.3
278.6
326.9
294.5
265.8
356.9
322.1
291.3
4.4
4.5
4.6
2.1
2.2
2.3
2.1
2.0
2.0
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 10 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103H002
2908
B25/100 = 3460 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
453130
337290
253330
191910
146590
420030
313850
236580
179850
137840
486230
360740
270070
203970
155350
7.3
7.0
6.6
6.3
6.0
1.2
1.2
1.2
1.1
1.1
6.0
5.8
5.6
5.5
5.3
30.0
25.0
20.0
15.0
10.0
112880
87588
68471
53910
42739
106470
82868
64970
51296
40776
119280
92307
71971
56524
44702
5.7
5.4
5.1
4.8
4.6
1.1
1.1
1.1
1.0
1.0
5.1
5.0
4.9
4.7
4.6
5.0
0.0
5.0
10.0
15.0
34109
27396
22140
17999
14716
32626
26269
21280
17339
14208
35592
28522
23000
18658
15224
4.3
4.1
3.9
3.7
3.5
1.0
1.0
0.9
0.9
0.9
4.4
4.3
4.2
4.1
4.0
20.0
25.0
30.0
35.0
40.0
12099
10000
8308
6936
5819
11706
9700
8038
6698
5609
12492
10300
8577
7174
6028
3.2
3.0
3.2
3.4
3.6
0.8
0.8
0.9
1.0
1.0
3.9
3.8
3.7
3.6
3.5
45.0
50.0
55.0
60.0
65.0
4904
4151
3529
3012
2582
4718
3987
3384
2884
2468
5089
4315
3674
3141
2696
3.8
3.9
4.1
4.3
4.4
1.1
1.2
1.3
1.4
1.5
3.4
3.3
3.2
3.1
3.0
70.0
75.0
80.0
85.0
90.0
2221
1918
1663
1446
1262
2120
1828
1582
1374
1197
2323
2009
1743
1518
1327
4.6
4.7
4.9
5.0
5.1
1.5
1.6
1.7
1.8
1.9
3.0
2.9
2.8
2.8
2.7
95.0
100.0
105.0
110.0
115.0
1105
970.2
854.6
755.1
669.0
1047
918.0
807.6
712.6
630.6
1163
1022
901.7
797.5
707.4
5.3
5.4
5.5
5.6
5.7
2.0
2.1
2.2
2.3
2.4
2.6
2.6
2.5
2.4
2.4
120.0
125.0
130.0
135.0
140.0
594.4
529.5
472.9
423.4
380.0
559.6
497.9
444.2
397.3
356.2
629.2
561.1
501.6
449.6
403.9
5.9
6.0
6.1
6.2
6.3
2.5
2.6
2.7
2.8
2.9
2.3
2.3
2.2
2.2
2.1
145.0
150.0
155.0
341.9
308.3
278.6
320.1
288.3
260.3
363.7
328.3
296.9
6.4
6.5
6.6
3.0
3.2
3.3
2.1
2.0
2.0
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 11 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103J002
2908
B25/100 = 3460 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
453130
337290
253330
191910
146590
410960
307100
231510
176010
134900
495300
367480
275140
207810
158280
9.3
9.0
8.6
8.3
8.0
1.6
1.5
1.5
1.5
1.5
6.0
5.8
5.6
5.5
5.3
30.0
25.0
20.0
15.0
10.0
112880
87588
68471
53910
42739
104210
81117
63600
50218
39921
121540
94059
73341
57602
45557
7.7
7.4
7.1
6.8
6.6
1.5
1.5
1.5
1.5
1.4
5.1
5.0
4.9
4.7
4.6
5.0
0.0
5.0
10.0
15.0
34109
27396
22140
17999
14716
31943
25721
20837
16979
13914
36274
29070
23442
19018
15519
6.3
6.1
5.9
5.7
5.5
1.4
1.4
1.4
1.4
1.4
4.4
4.3
4.2
4.1
4.0
20.0
25.0
30.0
35.0
40.0
12099
10000
8308
6936
5819
11464
9500
7872
6560
5492
12734
10500
8743
7312
6145
5.2
5.0
5.2
5.4
5.6
1.4
1.3
1.4
1.5
1.6
3.9
3.8
3.7
3.6
3.5
45.0
50.0
55.0
60.0
65.0
4904
4151
3529
3012
2582
4620
3904
3313
2824
2416
5187
4398
3744
3201
2748
5.8
5.9
6.1
6.3
6.4
1.7
1.8
1.9
2.0
2.1
3.4
3.3
3.2
3.1
3.0
70.0
75.0
80.0
85.0
90.0
2221
1918
1663
1446
1262
2075
1789
1549
1345
1172
2367
2047
1777
1547
1352
6.6
6.7
6.9
7.0
7.1
2.2
2.3
2.4
2.5
2.6
3.0
2.9
2.8
2.8
2.7
95.0
100.0
105.0
110.0
115.0
1105
970.2
854.6
755.1
669.0
1025
898.5
790.5
697.5
617.2
1185
1042
918.8
812.6
720.8
7.3
7.4
7.5
7.6
7.7
2.8
2.9
3.0
3.1
3.2
2.6
2.6
2.5
2.4
2.4
120.0
125.0
130.0
135.0
140.0
594.4
529.5
472.9
423.4
380.0
547.7
487.3
434.7
388.8
348.6
641.1
571.6
511.1
458.0
411.5
7.9
8.0
8.1
8.2
8.3
3.4
3.5
3.6
3.7
3.9
2.3
2.3
2.2
2.2
2.1
145.0
150.0
155.0
341.9
308.3
278.6
313.2
282.1
254.7
370.5
334.4
302.5
8.4
8.5
8.6
4.0
4.1
4.3
2.1
2.0
2.0
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 12 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103F003
2001
B25/100 = 3920 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
877620
619220
441680
318330
231730
826090
585350
419220
303320
221620
929150
653080
464130
333340
241840
5.9
5.5
5.1
4.7
4.4
0.8
0.8
0.8
0.7
0.7
7.0
6.8
6.7
6.5
6.3
30.0
25.0
20.0
15.0
10.0
170300
126210
94515
71273
54270
163450
121540
91314
69073
52751
177160
130880
97717
73474
55789
4.0
3.7
3.4
3.1
2.8
0.7
0.6
0.6
0.6
0.5
6.1
5.9
5.7
5.5
5.4
5.0
0.0
5.0
10.0
15.0
41522
32063
25019
19679
15623
40475
31340
24520
19336
15387
42569
32785
25518
20023
15858
2.5
2.3
2.0
1.7
1.5
0.5
0.4
0.4
0.4
0.3
5.2
5.0
4.9
4.7
4.6
20.0
25.0
30.0
35.0
40.0
12488
10000
8110
6593
5392
12329
9900
8008
6496
5302
12648
10100
8213
6690
5483
1.3
1.0
1.3
1.5
1.7
0.3
0.2
0.3
0.4
0.4
4.5
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4434
3667
3051
2551
2146
4351
3592
2983
2489
2090
4518
3743
3120
2613
2202
1.9
2.1
2.3
2.4
2.6
0.5
0.6
0.6
0.7
0.8
3.8
3.7
3.6
3.5
3.4
70.0
75.0
80.0
85.0
90.0
1813
1536
1306
1116
956.1
1763
1491
1266
1079
923.5
1863
1581
1347
1152
988.6
2.8
2.9
3.1
3.3
3.4
0.8
0.9
1.0
1.0
1.1
3.4
3.3
3.2
3.1
3.0
95.0
100.0
105.0
110.0
115.0
823.5
711.8
617.8
538.0
469.7
794.2
685.5
594.1
516.7
450.4
852.7
738.1
641.5
559.3
488.9
3.5
3.7
3.8
4.0
4.1
1.2
1.3
1.4
1.4
1.5
3.0
2.9
2.8
2.7
2.7
120.0
125.0
130.0
135.0
140.0
411.3
361.4
318.5
281.5
249.5
393.9
345.7
304.2
268.6
237.8
428.7
377.1
332.7
294.5
261.3
4.2
4.4
4.5
4.6
4.7
1.6
1.7
1.8
1.9
2.0
2.6
2.6
2.5
2.5
2.4
145.0
150.0
155.0
221.6
197.2
176.1
210.9
187.5
167.2
232.3
207.0
184.9
4.8
4.9
5.0
2.1
2.1
2.2
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 13 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103H003
2001
B25/100 = 3920 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
877620
619220
441680
318330
231730
808540
572970
410390
296960
216990
946710
665470
472970
339710
246470
7.9
7.5
7.1
6.7
6.4
1.1
1.1
1.1
1.0
1.0
7.0
6.8
6.7
6.5
6.3
30.0
25.0
20.0
15.0
10.0
170300
126210
94515
71273
54270
160040
119010
89424
67648
51666
180560
133400
99607
74899
56874
6.0
5.7
5.4
5.1
4.8
1.0
1.0
0.9
0.9
0.9
6.1
5.9
5.7
5.5
5.4
5.0
0.0
5.0
10.0
15.0
41522
32063
25019
19679
15623
39645
30699
24019
18942
15075
43399
33426
26019
20417
16170
4.5
4.3
4.0
3.7
3.5
0.9
0.8
0.8
0.8
0.8
5.2
5.0
4.9
4.7
4.6
20.0
25.0
30.0
35.0
40.0
12488
10000
8110
6593
5392
12080
9700
7846
6364
5194
12897
10300
8375
6822
5591
3.3
3.0
3.3
3.5
3.7
0.7
0.7
0.8
0.9
0.9
4.5
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4434
3667
3051
2551
2146
4263
3518
2922
2438
2047
4606
3817
3181
2664
2244
3.9
4.1
4.3
4.4
4.6
1.0
1.1
1.2
1.3
1.3
3.8
3.7
3.6
3.5
3.4
70.0
75.0
80.0
85.0
90.0
1813
1536
1306
1116
956.1
1727
1460
1240
1057
904.4
1900
1612
1373
1174
1008
4.8
4.9
5.1
5.3
5.4
1.4
1.5
1.6
1.7
1.8
3.4
3.3
3.2
3.1
3.0
95.0
100.0
105.0
110.0
115.0
823.5
711.8
617.8
538.0
469.7
777.8
671.3
581.8
505.9
441.1
869.2
752.3
653.8
570.1
498.3
5.5
5.7
5.8
6.0
6.1
1.9
2.0
2.1
2.2
2.3
3.0
2.9
2.8
2.7
2.7
120.0
125.0
130.0
135.0
140.0
411.3
361.4
318.5
281.5
249.5
385.7
338.5
297.9
263.0
232.8
436.9
384.4
339.1
300.1
266.3
6.2
6.4
6.5
6.6
6.7
2.4
2.5
2.6
2.7
2.8
2.6
2.6
2.5
2.5
2.4
145.0
150.0
155.0
221.6
197.2
176.1
206.5
183.5
163.7
236.7
210.9
188.5
6.8
6.9
7.0
2.9
3.0
3.1
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 14 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0103J003
2001
B25/100 = 3920 K, R25 = 10000 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
877620
619220
441680
318330
231730
790990
560580
401560
290590
212350
964260
677850
481800
346080
251110
9.9
9.5
9.1
8.7
8.4
1.4
1.4
1.4
1.3
1.3
7.0
6.8
6.7
6.5
6.3
30.0
25.0
20.0
15.0
10.0
170300
126210
94515
71273
54270
156640
116490
87533
66222
50580
183970
135920
101500
76325
57960
8.0
7.7
7.4
7.1
6.8
1.3
1.3
1.3
1.3
1.3
6.1
5.9
5.7
5.5
5.4
5.0
0.0
5.0
10.0
15.0
41522
32063
25019
19679
15623
38815
30058
23519
18549
14762
44230
34068
26519
20810
16483
6.5
6.3
6.0
5.7
5.5
1.3
1.2
1.2
1.2
1.2
5.2
5.0
4.9
4.7
4.6
20.0
25.0
30.0
35.0
40.0
12488
10000
8110
6593
5392
11830
9500
7683
6232
5086
13147
10500
8538
6954
5699
5.3
5.0
5.3
5.5
5.7
1.2
1.2
1.3
1.3
1.4
4.5
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
4434
3667
3051
2551
2146
4174
3445
2861
2387
2004
4695
3890
3242
2715
2287
5.9
6.1
6.3
6.4
6.6
1.5
1.6
1.7
1.8
1.9
3.8
3.7
3.6
3.5
3.4
70.0
75.0
80.0
85.0
90.0
1813
1536
1306
1116
956.1
1690
1429
1214
1035
885.3
1936
1643
1399
1196
1027
6.8
6.9
7.1
7.3
7.4
2.0
2.1
2.2
2.3
2.4
3.4
3.3
3.2
3.1
3.0
95.0
100.0
105.0
110.0
115.0
823.5
711.8
617.8
538.0
469.7
761.3
657.0
569.4
495.1
431.7
885.6
766.6
666.2
580.9
507.7
7.5
7.7
7.8
8.0
8.1
2.6
2.7
2.8
2.9
3.0
3.0
2.9
2.8
2.7
2.7
120.0
125.0
130.0
135.0
140.0
411.3
361.4
318.5
281.5
249.5
377.5
331.2
291.5
257.3
227.8
445.2
391.6
345.5
305.7
271.3
8.2
8.4
8.5
8.6
8.7
3.1
3.3
3.4
3.5
3.6
2.6
2.6
2.5
2.5
2.4
145.0
150.0
155.0
221.6
197.2
176.1
202.0
179.6
160.1
241.1
214.8
192.0
8.8
8.9
9.0
3.8
3.9
4.0
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 15 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0123F000
2901
B25/100 = 3760 K, R25 = 12000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
767630
554140
404850
299120
223330
724060
524840
384940
285460
213890
811190
583450
424770
312780
232770
5.7
5.3
4.9
4.6
4.2
0.9
0.8
0.8
0.8
0.7
6.4
6.3
6.1
6.0
5.8
30.0
25.0
20.0
15.0
10.0
168400
128150
98376
75748
58816
161830
123550
95138
73472
57212
174970
132750
101610
78023
60421
3.9
3.6
3.3
3.0
2.7
0.7
0.7
0.6
0.6
0.5
5.6
5.5
5.3
5.1
5.0
5.0
0.0
5.0
10.0
15.0
45852
36033
28562
22799
18308
44724
35238
28003
22408
18036
46980
36827
29121
23191
18580
2.5
2.2
2.0
1.7
1.5
0.5
0.5
0.4
0.4
0.3
4.9
4.7
4.6
4.5
4.3
20.0
25.0
30.0
35.0
40.0
14796
12000
9801
8060
6663
14609
11880
9678
7942
6553
14983
12120
9925
8178
6773
1.3
1.0
1.3
1.5
1.7
0.3
0.2
0.3
0.4
0.4
4.2
4.1
4.0
3.9
3.8
45.0
50.0
55.0
60.0
65.0
5531
4615
3862
3248
2749
5430
4522
3777
3171
2679
5633
4709
3947
3325
2819
1.8
2.0
2.2
2.4
2.5
0.5
0.6
0.6
0.7
0.8
3.7
3.6
3.5
3.4
3.3
70.0
75.0
80.0
85.0
90.0
2336
1993
1707
1466
1264
2273
1936
1655
1420
1222
2399
2050
1758
1512
1306
2.7
2.9
3.0
3.2
3.3
0.8
0.9
1.0
1.1
1.1
3.2
3.2
3.1
3.0
2.9
95.0
100.0
105.0
110.0
115.0
1095
951.4
828.7
724.1
634.6
1057
917.3
797.9
696.2
609.4
1133
985.5
859.6
751.9
659.8
3.4
3.6
3.7
3.8
4.0
1.2
1.3
1.4
1.4
1.5
2.9
2.8
2.7
2.7
2.6
120.0
125.0
130.0
135.0
140.0
557.8
491.8
434.8
385.2
342.1
534.9
471.1
416.0
368.1
326.5
580.6
512.6
453.6
402.4
357.7
4.1
4.2
4.3
4.4
4.6
1.6
1.7
1.8
1.9
1.9
2.6
2.5
2.4
2.4
2.3
145.0
150.0
155.0
304.5
271.6
242.8
290.3
258.6
230.9
318.7
284.6
254.6
4.7
4.8
4.9
2.0
2.1
2.2
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 16 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0123H000
2901
B25/100 = 3760 K, R25 = 12000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
767630
554140
404850
299120
223330
708710
513760
376840
279480
209420
826540
594530
432870
318760
237240
7.7
7.3
6.9
6.6
6.2
1.2
1.2
1.1
1.1
1.1
6.4
6.3
6.1
6.0
5.8
30.0
25.0
20.0
15.0
10.0
168400
128150
98376
75748
58816
158460
120990
93170
71957
56036
178340
135320
103580
79538
61597
5.9
5.6
5.3
5.0
4.7
1.1
1.0
1.0
1.0
0.9
5.6
5.5
5.3
5.1
5.0
5.0
0.0
5.0
10.0
15.0
45852
36033
28562
22799
18308
43807
34518
27432
21952
17670
47897
37548
29692
23647
18947
4.5
4.2
4.0
3.7
3.5
0.9
0.9
0.9
0.8
0.8
4.9
4.7
4.6
4.5
4.3
20.0
25.0
30.0
35.0
40.0
14796
12000
9801
8060
6663
14313
11640
9482
7781
6420
15279
12360
10121
8339
6907
3.3
3.0
3.3
3.5
3.7
0.8
0.7
0.8
0.9
1.0
4.2
4.1
4.0
3.9
3.8
45.0
50.0
55.0
60.0
65.0
5531
4615
3862
3248
2749
5319
4429
3700
3106
2624
5744
4801
4024
3390
2874
3.8
4.0
4.2
4.4
4.5
1.0
1.1
1.2
1.3
1.4
3.7
3.6
3.5
3.4
3.3
70.0
75.0
80.0
85.0
90.0
2336
1993
1707
1466
1264
2226
1896
1621
1390
1197
2446
2090
1792
1542
1331
4.7
4.9
5.0
5.2
5.3
1.5
1.5
1.6
1.7
1.8
3.2
3.2
3.1
3.0
2.9
95.0
100.0
105.0
110.0
115.0
1095
951.4
828.7
724.1
634.6
1035
898.3
781.4
681.7
596.7
1154
1005
876.1
766.4
672.5
5.4
5.6
5.7
5.8
6.0
1.9
2.0
2.1
2.2
2.3
2.9
2.8
2.7
2.7
2.6
120.0
125.0
130.0
135.0
140.0
557.8
491.8
434.8
385.2
342.1
523.8
461.2
407.3
360.4
319.7
591.8
522.4
462.3
410.1
364.6
6.1
6.2
6.3
6.4
6.6
2.4
2.5
2.6
2.7
2.8
2.6
2.5
2.4
2.4
2.3
145.0
150.0
155.0
304.5
271.6
242.8
284.2
253.2
226.1
324.8
290.0
259.5
6.7
6.8
6.9
2.9
3.0
3.1
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 17 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0123J000
2901
B25/100 = 3760 K, R25 = 12000 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
767630
554140
404850
299120
223330
693360
502670
368740
273500
204960
841890
605620
440960
324740
241710
9.7
9.3
8.9
8.6
8.2
1.5
1.5
1.5
1.4
1.4
6.4
6.3
6.1
6.0
5.8
30.0
25.0
20.0
15.0
10.0
168400
128150
98376
75748
58816
155090
118420
91203
70442
54860
181710
137880
105550
81053
62773
7.9
7.6
7.3
7.0
6.7
1.4
1.4
1.4
1.4
1.3
5.6
5.5
5.3
5.1
5.0
5.0
0.0
5.0
10.0
15.0
45852
36033
28562
22799
18308
42890
33797
26860
21496
17303
48815
38268
30263
24103
19313
6.5
6.2
6.0
5.7
5.5
1.3
1.3
1.3
1.3
1.3
4.9
4.7
4.6
4.5
4.3
20.0
25.0
30.0
35.0
40.0
14796
12000
9801
8060
6663
14017
11400
9286
7620
6287
15575
12600
10317
8500
7040
5.3
5.0
5.3
5.5
5.7
1.3
1.2
1.3
1.4
1.5
4.2
4.1
4.0
3.9
3.8
45.0
50.0
55.0
60.0
65.0
5531
4615
3862
3248
2749
5208
4337
3622
3041
2569
5855
4893
4102
3455
2929
5.8
6.0
6.2
6.4
6.5
1.6
1.7
1.8
1.9
2.0
3.7
3.6
3.5
3.4
3.3
70.0
75.0
80.0
85.0
90.0
2336
1993
1707
1466
1264
2180
1856
1587
1361
1172
2493
2130
1826
1571
1356
6.7
6.9
7.0
7.2
7.3
2.1
2.2
2.3
2.4
2.5
3.2
3.2
3.1
3.0
2.9
95.0
100.0
105.0
110.0
115.0
1095
951.4
828.7
724.1
634.6
1013
879.2
764.8
667.3
584.0
1176
1024
892.7
780.9
685.2
7.4
7.6
7.7
7.8
8.0
2.6
2.7
2.8
2.9
3.0
2.9
2.8
2.7
2.7
2.6
120.0
125.0
130.0
135.0
140.0
557.8
491.8
434.8
385.2
342.1
512.6
451.4
398.6
352.7
312.8
603.0
532.2
471.0
417.8
371.4
8.1
8.2
8.3
8.4
8.6
3.2
3.3
3.4
3.5
3.6
2.6
2.5
2.4
2.4
2.3
145.0
150.0
155.0
304.5
271.6
242.8
278.1
247.8
221.2
330.9
295.4
264.3
8.7
8.8
8.9
3.8
3.9
4.0
2.3
2.3
2.2
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 18 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0303F000
8018
B25/100 = 3964 K, R25 = 30000 Ω, TR = 25 °C, ∆RR/RR = ± 1%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
2472200
1750300
1253200
907060
663280
2325700
1653700
1189000
863910
634100
2618700
1846900
1317500
950200
692460
5.9
5.5
5.1
4.8
4.4
0.8
0.8
0.8
0.7
0.7
7.0
6.8
6.6
6.4
6.2
30.0
25.0
20.0
15.0
10.0
489810
365130
274640
208370
159410
469940
351510
265270
201890
154910
509680
378740
284020
214850
163900
4.1
3.7
3.4
3.1
2.8
0.7
0.6
0.6
0.6
0.5
6.0
5.8
5.6
5.4
5.3
5.0
0.0
5.0
10.0
15.0
122920
95501
74745
58911
46745
119800
93336
73245
57877
46038
126030
97666
76244
59944
47451
2.5
2.3
2.0
1.8
1.5
0.5
0.5
0.4
0.4
0.3
5.1
5.0
4.8
4.7
4.6
20.0
25.0
30.0
35.0
40.0
37332
30000
24253
19720
16123
36855
29700
23945
19428
15851
37808
30300
24561
20012
16395
1.3
1.0
1.3
1.5
1.7
0.3
0.2
0.3
0.4
0.4
4.4
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
13252
10949
9091
7584
6356
13002
10721
8885
7399
6189
13502
11177
9297
7770
6523
1.9
2.1
2.3
2.4
2.6
0.5
0.6
0.6
0.7
0.8
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
5351
4524
3840
3273
2800
5201
4390
3720
3166
2704
5500
4657
3960
3380
2896
2.8
3.0
3.1
3.3
3.4
0.8
0.9
1.0
1.0
1.1
3.4
3.3
3.2
3.2
3.1
95.0
100.0
105.0
110.0
115.0
2405
2073
1792
1555
1354
2319
1995
1723
1493
1298
2491
2150
1862
1618
1410
3.6
3.7
3.9
4.0
4.1
1.2
1.3
1.3
1.4
1.5
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
1182
1036
910.0
801.7
708.3
1132
990.3
868.9
764.6
674.6
1233
1081
951.0
838.9
741.9
4.3
4.4
4.5
4.6
4.8
1.6
1.7
1.8
1.8
1.9
2.7
2.6
2.6
2.5
2.5
145.0
150.0
155.0
627.4
557.2
496.1
596.9
529.5
470.9
658.0
585.0
521.4
4.9
5.0
5.1
2.0
2.1
2.2
2.4
2.3
2.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 19 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0303H000
8018
B25/100 = 3964 K, R25 = 30000 Ω, TR = 25 °C, ∆RR/RR = ± 3%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
2472200
1750300
1253200
907060
663280
2276300
1618700
1163900
845770
620830
2668200
1881900
1342600
968340
705730
7.9
7.5
7.1
6.8
6.4
1.1
1.1
1.1
1.1
1.0
7.0
6.8
6.6
6.4
6.2
30.0
25.0
20.0
15.0
10.0
489810
365130
274640
208370
159410
460140
344210
259780
197730
151720
519480
386040
289510
219020
167090
6.1
5.7
5.4
5.1
4.8
1.0
1.0
1.0
0.9
0.9
6.0
5.8
5.6
5.4
5.3
5.0
0.0
5.0
10.0
15.0
122920
95501
74745
58911
46745
117340
91426
71750
56699
45103
128490
99576
77739
61122
48386
4.5
4.3
4.0
3.8
3.5
0.9
0.9
0.8
0.8
0.8
5.1
5.0
4.8
4.7
4.6
20.0
25.0
30.0
35.0
40.0
37332
30000
24253
19720
16123
36108
29100
23460
19033
15528
38555
30900
25046
20406
16717
3.3
3.0
3.3
3.5
3.7
0.7
0.7
0.8
0.9
0.9
4.4
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
13252
10949
9091
7584
6356
12737
10503
8703
7247
6062
13767
11396
9479
7921
6650
3.9
4.1
4.3
4.4
4.6
1.0
1.1
1.2
1.2
1.3
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
5351
4524
3840
3273
2800
5094
4299
3643
3100
2648
5607
4748
4037
3446
2952
4.8
5.0
5.1
5.3
5.4
1.4
1.5
1.6
1.7
1.8
3.4
3.3
3.2
3.2
3.1
95.0
100.0
105.0
110.0
115.0
2405
2073
1792
1555
1354
2271
1954
1687
1462
1271
2539
2191
1897
1649
1437
5.6
5.7
5.9
6.0
6.1
1.9
1.9
2.0
2.1
2.2
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
1182
1036
910.0
801.7
708.3
1108
969.6
850.7
748.5
660.5
1257
1102
969.2
854.9
756.1
6.3
6.4
6.5
6.6
6.8
2.3
2.4
2.5
2.6
2.8
2.7
2.6
2.6
2.5
2.5
145.0
150.0
155.0
627.4
557.2
496.1
584.4
518.4
461.0
670.5
596.1
531.3
6.9
7.0
7.1
2.9
3.0
3.1
2.4
2.3
2.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 20 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
B57885S0303J000
8018
B25/100 = 3964 K, R25 = 30000 Ω, TR = 25 °C, ∆RR/RR = ± 5%
Rnom[Ω]
Rmin[Ω]
Rmax[Ω]
∆RR/RR[±%] ∆T[±°C]
α (%/K)
55.0
50.0
45.0
40.0
35.0
2472200
1750300
1253200
907060
663280
2226900
1583700
1138800
827630
607570
2717600
1916900
1367700
986480
718990
9.9
9.5
9.1
8.8
8.4
1.4
1.4
1.4
1.4
1.4
7.0
6.8
6.6
6.4
6.2
30.0
25.0
20.0
15.0
10.0
489810
365130
274640
208370
159410
450340
336910
254280
193560
148540
529280
393350
295000
223190
170270
8.1
7.7
7.4
7.1
6.8
1.4
1.3
1.3
1.3
1.3
6.0
5.8
5.6
5.4
5.3
5.0
0.0
5.0
10.0
15.0
122920
95501
74745
58911
46745
114880
89516
70255
55521
44168
130950
101490
79234
62301
49321
6.5
6.3
6.0
5.8
5.5
1.3
1.3
1.2
1.2
1.2
5.1
5.0
4.8
4.7
4.6
20.0
25.0
30.0
35.0
40.0
37332
30000
24253
19720
16123
35362
28500
22975
18639
15206
39302
31500
25531
20801
17040
5.3
5.0
5.3
5.5
5.7
1.2
1.2
1.3
1.3
1.4
4.4
4.3
4.2
4.1
4.0
45.0
50.0
55.0
60.0
65.0
13252
10949
9091
7584
6356
12472
10284
8521
7095
5935
14032
11615
9660
8073
6777
5.9
6.1
6.3
6.4
6.6
1.5
1.6
1.7
1.8
1.9
3.9
3.8
3.7
3.6
3.5
70.0
75.0
80.0
85.0
90.0
5351
4524
3840
3273
2800
4987
4209
3567
3035
2592
5714
4838
4114
3511
3008
6.8
7.0
7.1
7.3
7.4
2.0
2.1
2.2
2.3
2.4
3.4
3.3
3.2
3.2
3.1
95.0
100.0
105.0
110.0
115.0
2405
2073
1792
1555
1354
2223
1912
1651
1431
1244
2587
2233
1933
1680
1464
7.6
7.7
7.9
8.0
8.1
2.5
2.6
2.7
2.9
3.0
3.0
2.9
2.9
2.8
2.7
120.0
125.0
130.0
135.0
140.0
1182
1036
910.0
801.7
708.3
1085
948.9
832.5
732.5
646.3
1280
1123
987.4
870.9
770.3
8.3
8.4
8.5
8.6
8.8
3.1
3.2
3.3
3.4
3.6
2.7
2.6
2.6
2.5
2.5
145.0
150.0
155.0
627.4
557.2
496.1
571.8
507.2
451.1
683.1
607.3
541.2
8.9
9.0
9.1
3.7
3.8
4.0
2.4
2.3
2.3
R/T No.
T (°C)
Please read Cautions and warnings and
Important notes at the end of this document.
Page 21 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Taping and packing
1
Taping of radial leaded NTC thermistors
Dimensions and tolerances
Lead spacing F = 2.5 mm and 5.0 mm (taping to IEC 60286-2)
Dimensions (mm)
b
s
d
P0
P1
F
∆h
∆p
W
W0
W1
W2
H
H0
H1
D0
t
L
L1
Lead
spacing
2.5 mm
11.0
5.0
0.5/0.6
12.7
5.1
2.5
0
0
18.0
5.5
9.0
3.0
18.0
16.0
32.2
4.0
0.9
11.0
4.0
Lead
spacing
5 mm
11.5
6.0
0.5/0.6
12.7
3.85
5.0
0
0
18.0
5.5
9.0
3.0
18.0
16.0
32.2
4.0
0.9
11.0
4.0
Please read Cautions and warnings and
Important notes at the end of this document.
Tolerance of
lead spacing
2.5/5 mm
max.
max.
±0.05
±0.3
±0.7
+0.6/0.1
±2.0
±1.3
±0.5
min.
+0.75/0.5
max.
+2.0/0
±0.5
max.
±0.2
max.
max.
max.
Remarks
±1 mm / 20 sprocket holes
measured at top of component body
peel-off force ≥5 N
without wires
Page 22 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Types of packing
Ammo packing
Ammo
type
x
y
z
I
80
240
210
Packing unit: 1000 - 2000 pcs./reel
Reel packing
Packing unit: 1000 - 2000 pcs./reel
Reel dimensions (in mm)
Reel type
d
f
n
w
I
360 max.
31 ±1
approx. 45
54 max.
II
500 max.
23 ±1
approx. 59
72 max.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 23 of 33
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
B57885S
S885
Cassette packing
Packing unit: 1000 - 2000 pcs./cassette
Bulk packing
The components are packed in cardboard boxes, the size of which depends on the order quantity.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 24 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
2
S885
Packing codes
The last two digits of the complete ordering code state the packing mode:
Last two digits
00, 01, 02, 03,04,
05, 06, 07, 08
Bulk
40
Bulk
45
Bulk
50
Radial leads, kinked
Cardboard tape
Cassette packing
51
Radial leads, kinked
Cardboard tape
360 or 500-mm reel packing
52
Radial leads, straight
Cardboard tape
Cassette packing
53
Radial leads, straight
Cardboard tape
360 or 500-mm reel packing
54
Radial leads, kinked
Cardboard tape
AMMO packing
55
Radial leads, straight
Cardboard tape
AMMO packing
60
SMD
Cardboard tape
180-mm reel packing
62
SMD
Blister tape
180-mm reel packing
70
SMD
Cardboard tape
330-mm reel packing
72
SMD
Blister tape
330-mm reel packing
(If no packing code is indicated, this corresponds to 40)
Example 1:
B57164K0102J000
B57164K0102J052
Bulk
Cardboard tape, cassette packing
Example 2:
B57881S0103F002
B57881S0103F251
Bulk
Cardboard tape, reel packing
Please read Cautions and warnings and
Important notes at the end of this document.
Page 25 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Mounting instructions
1
Soldering
1.1
Leaded NTC thermistors
Leaded thermistors comply with the solderability requirements specified by CECC.
When soldering, care must be taken that the NTC thermistors are not damaged by excessive
heat. The following maximum temperatures, maximum time spans and minimum distances have
to be observed:
Dip soldering
Iron soldering
Bath temperature
max. 260 °C
max. 360 °C
Soldering time
max. 4 s
max. 2 s
Distance from thermistor
min. 6 mm
min. 6 mm
Under more severe soldering conditions the resistance may change.
1.2
Leadless NTC thermistors
In case of NTC thermistors without leads, soldering is restricted to devices which are provided
with a solderable metallization. The temperature shock caused by the application of hot solder
may produce fine cracks in the ceramic, resulting in changes in resistance.
To prevent leaching of the metallization, solder with silver additives or with a low tin content
should be used. In addition, soldering methods should be employed which permit short soldering
times.
2
Clamp contacting
Pressure contacting by means of clamps is particularly suitable for applications involving frequent
switching and high turn-on powers.
3
Robustness of terminations (leaded types)
The leads meet the requirements of IEC 60068-2-21. They may not be bent closer than 4 mm
from the solder joint on the thermistor body or from the point at which they leave the feedthroughs. During bending, any mechanical stress at the outlet of the leads must be removed. The
bending radius should be at least 0.75 mm.
Tensile strength:
Test Ua1:
Leads
0.25 <
0.35 <
0.50 <
0.80 <
Please read Cautions and warnings and
Important notes at the end of this document.
∅ ≤0.25 mm = 1.0 N
∅ ≤0.35 mm = 2.5 N
∅ ≤0.50 mm = 5.0 N
∅ ≤0.80 mm = 10.0 N
∅ ≤1.25 mm = 20.0 N
Page 26 of 33
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
B57885S
S885
Bending strength: Test Ub:
Two 90°-bends in opposite directions at a weight of 0.25 kg.
Torsional strength: Test Uc: severity 2
The lead is bent by 90° at a distance of 6 to 6.5 mm from the thermistor body.
The bending radius of the leads should be approx. 0.75 mm. Two torsions of
180° each (severity 2).
When subjecting leads to mechanical stress, the following should be observed:
Tensile stress on leads
During mounting and operation tensile forces on the leads are to be avoided.
Bending of leads
Bending of the leads directly on the thermistor body is not permissible.
A lead may be bent at a minimum distance of twice the wire's diameter +2 mm from the solder
joint on the thermistor body. During bending the wire must be mechanically relieved at its outlet.
The bending radius should be at least 0.75 mm.
Twisting of leads
The twisting (torsion) by 180° of a lead bent by 90° is permissible at 6 mm from the bottom of the
thermistor body.
4
Sealing and potting
When thermistors are sealed, potted or overmolded, there must be no mechanical stress caused
by thermal expansion during the production process (curing / overmolding process) and during
later operation. The upper category temperature of the thermistor must not be exceeded. Ensure
that the materials used (sealing / potting compound and plastic material) are chemically neutral.
5
Cleaning
If cleaning is necessary, mild cleaning agents such as ethyl alcohol and cleaning gasoline are
recommended. Cleaning agents based on water are not allowed. Ultrasonic cleaning methods are
permissible.
6
Storage
In order to maintain their solderability, thermistors must be stored in a non-corrosive atmosphere.
Humidity, temperature and container materials are critical factors.
Do not store SMDs where they are exposed to heat or direct sunlight. Otherwise, the packing material may be deformed or SMDs may stick together, causing problems during mounting. After
opening the factory seals, such as polyvinyl-sealed packages, use the SMDs as soon as possible.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 27 of 33
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
B57885S
S885
The components should be left in the original packing. Touching the metallization of unsoldered
thermistors may change their soldering properties.
Storage temperature:
25 °C up to 45 °C
Relative humidity (without condensation):
≤75% annual mean
<95%, maximum 30 days per annum
Solder the thermistors listed in this data book after shipment from EPCOS within the time specified:
SMDs:
12 months
Leaded components:
24 months
Please read Cautions and warnings and
Important notes at the end of this document.
Page 28 of 33
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
B57885S
S885
Cautions and warnings General
See "Important notes" at the end of this document.
Storage
Store thermistors only in original packaging. Do not open the package prior to storage.
Storage conditions in original packaging: storage temperature 25 °C ... +45 °C, relative
humidity ≤75% annual mean, <95% maximum 30 days per annum, dew precipitation is
inadmissible.
Do not store thermistors where they are exposed to heat or direct sunlight. Otherwise, the
packing material may be deformed or components may stick together, causing problems during
mounting.
Avoid contamination of thermistor surface during storage, handling and processing.
Avoid storage of thermistors in harmful environments like corrosive gases (SOx, Cl etc).
Use the components as soon as possible after opening the factory seals, i.e. the
polyvinyl-sealed packages.
Solder thermistors within the time specified after shipment from EPCOS.
For leaded components this is 24 months, for SMDs 12 months.
Handling
NTC thermistors must not be dropped. Chip-offs or any other damage must not be caused
during handling of NTCs.
Do not touch components with bare hands. Gloves are recommended.
Avoid contamination of thermistor surface during handling.
Bending / twisting leads
A lead (wire) may be bent at a minimum distance of twice the wire’s diameter plus 4 mm from
the component head or housing. When bending ensure the wire is mechanically relieved at the
component head or housing. The bending radius should be at least 0.75 mm.
Twisting (torsion) by 180° of a lead bent by 90° is permissible at 6 mm from the bottom of the
thermistor body.
Soldering
Use resin-type flux or non-activated flux.
Insufficient preheating may cause ceramic cracks.
Rapid cooling by dipping in solvent is not recommended.
Complete removal of flux is recommended.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 29 of 33
Temperature measurement and compensation
Leaded NTC thermistors, lead spacing 5 mm
B57885S
S885
Mounting
Ensure that no thermo-mechanical stress occurs due to production processes (curing or
overmolding processes) when thermistors are sealed, potted or overmolded or during their
subsequent operation. The maximum temperature of the thermistor must not be exceeded.
Ensure that the materials used (sealing/potting compound and plastic material) are chemically
neutral.
Electrodes/contacts must not be scratched or damaged before/during/after the mounting
process.
Contacts and housing used for assembly with the thermistor must be clean before mounting.
Ensure that adjacent materials are designed for operation at temperatures comparable to the
surface temperature of the thermistor. Be sure that surrounding parts and materials can
withstand the temperature.
Avoid contamination of the thermistor surface during processing.
The connections of sensors (e.g. cable end, wire end, plug terminal) may only be exposed to
an environment with normal atmospheric conditions.
Tensile forces on cables or leads must be avoided during mounting and operation.
Bending or twisting of cables or leads directly on the thermistor body is not permissible.
Avoid using chemical substances as mounting aids. It must be ensured that no water or other
liquids enter the NTC thermistors (e.g. through plug terminals). In particular, water based
substances (e.g. soap suds) must not be used as mounting aids for sensors.
Operation
Use thermistors only within the specified operating temperature range.
Use thermistors only within the specified power range.
Environmental conditions must not harm the thermistors. Only use the thermistors under
normal atmospheric conditions or within the specified conditions.
Contact of NTC thermistors with any liquids and solvents should be prevented. It must be
ensured that no water enters the NTC thermistors (e.g. through plug terminals). For
measurement purposes (checking the specified resistance vs. temperature), the component
must not be immersed in water but in suitable liquids (e.g. Galden).
Avoid dewing and condensation unless thermistor is specified for these conditions.
Bending or twisting of cables and/or wires is not permissible during operation of the sensor in
the application.
Be sure to provide an appropriate fail-safe function to prevent secondary product damage
caused by malfunction.
This listing does not claim to be complete, but merely reflects the experience of EPCOS AG.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 30 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Symbols and terms
Symbol
English
German
A
AWG
Area
American Wire Gauge
Fläche
Amerikanische Norm für Drahtquerschnitte
B
B25/100
B value
B value determined by resistance
measurement at 25 °C and 100 °C
B-Wert
B-Wert, ermittelt durch Widerstandsmessungen bei 25 °C und 100 °C
Cth
Heat capacitance
Wärmekapazität
I
Current
Strom
N
Number (integer)
Anzahl (ganzzahliger Wert)
P25
Pdiss
Pel
Pmax
Maximum power at 25 °C
Power dissipation
Electrical power
Maximum power within stated
temperature range
Maximale Leistung bei 25 °C
Verlustleistung
Elektrische Leistung
Maximale Leistung im
angegebenenTemperaturbereich
∆RB/RB
Resistance tolerance caused by
spread of B value
Insulation resistance
Parallel resistance
Rated resistance
Resistance tolerance
Series resistance
Resistance at temperature T
(e.g. R25 = resistance at 25 °C)
Widerstandstoleranz, die durch die
Streuung des B-Wertes verursacht wird
Isolationswiderstand
Parallelwiderstand
Nennwiderstand
Widerstandstoleranz
Serienwiderstand
Widerstand bei Temperatur T
(z.B. R25 = Widerstand bei 25 °C)
T
∆T
t
TA
Tmax
Temperature
Temperature tolerance
Time
Ambient temperature
Upper category temperature
Tmin
Lower category temperature
Temperatur
Temperaturtoleranz
Zeit
Umgebungstemperatur
Obere Grenztemperatur
(Kategorietemperatur)
Untere Grenztemperatur
(Kategorietemperatur)
Top
TR
Tsurf
Operating temperature
Rated temperature
Surface temperature
Betriebstemperatur
Nenntemperatur
Oberflächentemperatur
V
Vins
Vop
Vtest
Voltage
Insulation test voltage
Operating voltage
Test voltage
Spannung
Isolationsprüfspannung
Betriebsspannung
Prüfspannung
Rins
RP
RR
∆RR/RR
RS
RT
Please read Cautions and warnings and
Important notes at the end of this document.
Page 31 of 33
Temperature measurement and compensation
B57885S
Leaded NTC thermistors, lead spacing 5 mm
S885
Symbol
English
German
α
Temperature coefficient
Temperaturkoeffizient
∆
Tolerance, change
Toleranz, Änderung
δth
Dissipation factor
Wärmeleitwert
τc
τa
Thermal cooling time constant
Thermal time constant
Thermische Abkühlzeitkonstante
Thermische Zeitkonstante
Abbreviations / Notes
Symbol
English
German
Surface-mounted devices
Oberflächenmontierbares Bauelement
*
To be replaced by a number in ordering Platzhalter für Zahl im Bestellnummerncodes, type designations etc.
code oder für die Typenbezeichnung.
+
To be replaced by a letter.
Platzhalter für einen Buchstaben.
All dimensions are given in mm.
Alle Maße sind in mm angegeben.
The commas used in numerical values
denote decimal points.
Verwendete Kommas in Zahlenwerten
bezeichnen Dezimalpunkte.
Please read Cautions and warnings and
Important notes at the end of this document.
Page 32 of 33
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by
third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order. We also
reserve the right to discontinue production and delivery of products. Consequently, we
cannot guarantee that all products named in this publication will always be available. The
aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP,
MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT,
SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
Page 33 of 33