EPCOS B82422T3330X000

SMT inductors
SIMID series, SIMID 1210-T
Series/Type:
B82422T
Date:
June 2009
%BUB4IFFU
© EPCOS AG 2009. Reproduction, publication and dissemination of this publication, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Size 1210 (EIA) or 3225 (IEC)
Rated inductance 0.010 NH to 100 NH
Rated current 60 mA to 450 mA
Construction
■ Ceramic or ferrite core
■ Laser-welded winding
■ Flame-retardant molding
Features
High Q factor
High resonance frequency
High L value
Qualified to AEC-Q200
Suitable for lead-free reflow soldering
as referenced in JEDEC J-STD 020C
■ RoHS-compatible
■
■
■
■
■
Applications
■
■
■
■
■
■
Filtering of supply voltages, coupling, decoupling
Antenna systems
Automotive electronics
Telecommunications
Consumer and data processing equipment
Industrial electronics
Terminals
■ Base material CuSn6
■ Layer composition Cu, Ag, Sn (lead-free)1)
■ Electro-plated
Marking
■ Marking on component:
Manufacturer and letter “T”, L value (in μH),
tolerance of L value (coded), date of manufacture (YWWD)
■ Minimum data on reel:
Manufacturer, ordering code, L value, quantity, date of packing
Delivery mode and packing units
■ 8-mm blister tape, wound on 180-mm or 330-mm ∅ reel
■ Packing units:
180-mm reel: 2000 pcs./reel
330-mm reel: 8000 pcs./reel
1) Ni-barrier-plated terminals (NiSn) on request (B82422T*50).
Please read Cautions and warnings and
Important notes at the end of this document.
2
06/09
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Dimensional drawing and layout recommendation
2±0.11)
A
0.5±0.2 1)
B
C
D
B
IND0053-6
2±0.1
0.4 min.1)
3.2+0.3
2.5+0.3
0.15 max.
A
B
C
D
2.7
1.15
2.1
4.4
Marking
1) Soldering area
Dimensions in mm
IND0073-6-E
Taping and packing
Reel
<_ 2.6
4±0.1
_0
12.75 +0.15
_2
330 +0
8±0.3
2±0.05
_2
180 +0
1.5+0.1
<_ 4.2
Component
14.4 max.
3.5±0.05
4±0.1
1.75±0.1
Blister tape
_0
8.4 +1.5
1.0+0.2
62±1.5
IND0592-V
Direction of unreeling
IND0559-Z-E
Dimensions in mm
Please read Cautions and warnings and
Important notes at the end of this document.
3
06/09
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Technical data and measuring conditions
Rated inductance LR
Measured with impedance analyzer Agilent 4294A
at frequency fL, 0.1 V, 20 °C
Q factor Qmin
Measured with impedance analyzer Agilent 4294A
at frequency fQ, 20 °C
Rated temperature TR
85 °C
Rated current IR
Maximum permissible DC with inductance decrease
ΔL/L0 ≤ 10% and temperature increase
of ≤ 30 K at rated temperature
Self-resonance frequency fres,min
Measured with network analyzer Agilent 8753D, 20 °C
DC resistance Rmax
Measured at 20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: (245 ±5) °C, (5 ±0.3) s
Wetting of soldering area ≥ 90%
(based on IEC 60068-2-58)
Resistance to soldering heat
260 °C, 40 s (as referenced in JEDEC J-STD 020C)
Climatic category
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, ≤ 75% RH
Weight
Approx. 50 mg
Please read Cautions and warnings and
Important notes at the end of this document.
4
06/09
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Characteristics and ordering codes
f L; f Q
IR
Rmax
fres,min
MHz
mA
Ω
MHz
Ordering code 1)2)
(∅ 180-mm reel)
15
100
450
0.10
4000
B82422T3100+000
17
100
450
0.11
3500
B82422T3120+000
0.015
19
100
450
0.13
3000
B82422T3150+000
0.018
21
100
450
0.14
2000
B82422T3180+000
0.022
23
100
450
0.16
2000
B82422T3220+000
0.027
23
100
450
0.17
1700
B82422T3270+000
0.033
25
100
450
0.18
1700
B82422T3330+000
0.039
25
100
450
0.19
1300
B82422T3390+000
0.047
26
100
450
0.20
1300
B82422T3470+000
0.056
26
100
450
0.21
1100
B82422T3560+000
0.068
27
100
450
0.23
1000
B82422T3680+000
0.082
27
100
450
0.26
1000
B82422T3820+000
0.10
28
100
450
0.31
900
B82422T3101+000
LR
Tolerance
Qmin
μH
Core material: ceramic
0.010
±5%
0.012
±10%
^
J
^
K
Core material: ferrite
0.12
±5%
0.15
±10%
30
25.2
450
0.15
900
B82422T1121+000
30
25.2
450
0.18
700
B82422T1151+000
0.18
30
25.2
450
0.19
500
B82422T1181+000
0.22
30
25.2
450
0.20
500
B82422T1221+000
0.27
30
25.2
450
0.21
500
B82422T1271+000
0.33
30
25.2
450
0.23
500
B82422T1331+000
0.39
30
25.2
450
0.25
400
B82422T1391+000
0.47
30
25.2
450
0.30
400
B82422T1471+000
0.56
30
25.2
450
0.31
300
B82422T1561+000
0.68
30
25.2
450
0.34
300
B82422T1681+000
0.82
30
25.2
450
0.38
300
B82422T1821+000
1.0
30
7.96
400
0.6
300
B82422T1102+000
1.2
30
7.96
390
0.7
250
B82422T1122+000
^
J
^
K
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size ∅ 330 mm the last digit has to be an »8«. Example: B82422T3100K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
5
06/09
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Characteristics and ordering codes
LR
Ordering code 1)2)
(∅ 180-mm reel)
f L; f Q
IR
Rmax
fres,min
MHz
mA
Ω
MHz
30
7.96
370
0.7
200
B82422T1152+000
30
7.96
350
0.8
140
B82422T1182+000
2.2
30
7.96
320
0.8
100
B82422T1222+000
2.7
30
7.96
290
0.9
70
B82422T1272+000
3.3
30
7.96
260
1.2
60
B82422T1332+000
3.9
30
7.96
250
1.3
60
B82422T1392+000
4.7
30
7.96
220
1.5
50
B82422T1472+000
5.6
27
7.96
200
1.6
45
B82422T1562+000
6.8
27
7.96
180
1.8
40
B82422T1682+000
8.2
27
7.96
170
2.0
35
B82422T1822+000
10
27
2.52
150
2.1
30
B82422T1103+000
12
27
2.52
140
2.5
25
B82422T1123+000
15
27
2.52
130
2.8
20
B82422T1153+000
18
27
2.52
120
3.0
20
B82422T1183+000
22
27
2.52
110
3.5
20
B82422T1223+000
27
27
2.52
80
4.5
20
B82422T1273+000
33
27
2.52
70
5.6
17
B82422T1333+000
39
27
2.52
65
6.4
16
B82422T1393+000
47
27
2.52
60
7.0
15
B82422T1473+000
56
27
2.52
60
8.0
12
B82422T1563+000
68
27
2.52
60
9.0
9
B82422T1683+000
82
25
2.52
60
10
9
B82422T1823+000
100
20
0.796
60
11
8
B82422T1104+000
Tolerance
Qmin
μH
1.5
±5%
1.8
±10%
^
J
^
K
Closer tolerances and special versions on request.
Higher currents possible at temperatures <TR on request.
Sample kit available. Ordering code: B82422X001
For more information refer to chapter “Sample kits”.
1) Replace the + by the code letter for the required inductance tolerance.
For reel size ∅ 330 mm the last digit has to be an »8«. Example: B82422T1104K008
2) For Ni-barrier-plated terminals replace the last two digits “00” by “50” (reel 180 mm) or “58” (reel 330 mm).
Please read Cautions and warnings and
Important notes at the end of this document.
6
06/09
SMT inductors, SIMID series
B82422T
SIMID 1210-T
Impedance |Z| versus frequency f
measured with impedance analyzer
Agilent 4291A, typical values at 20 °C
IND0074-8
10 5
Ω
|Z |
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4275A,
typical values at 20 °C
B82422T
L
10 3
10 1
10 2
10 0
10
100 µH
10 µH
1 µH
100 nH
10 nH
10 0
10
_1
10
6
10
7
10
8
Hz 10
f
10
9
1 µH
_1
0.1 µH
_2
0.01 µH
_3
_2
10
_1
10 0
A 10 1
I DC
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = 85 °C)
IND0076-9
IND0077-H-E
1.2
B82422T
I op
IR
90
80
70
B82422T
1.0
0.8
60
0.01 µH
0.1 µH
50
40
10 µH
10
Q factor versus frequency f
measured with impedance analyzer Agilent
4194A/4291A, typical values at 20 °C
100
100 µH
10 2
10 1
Q
B82422T
µH
10 4
10
IND0075-W
10 3
0.6
0.12 µH
1 µH
10 µH
30 100 µH
0.4
20
0.2
10
0 5
10
10 6
10 7
10 8
0
Hz 10 9
f
0
20
40
60
80 100
˚C
TA
7
06/09
140
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
06/09
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with
them than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or failure
before the end of their usual service life cannot be completely ruled out in the current state
of the art, even if they are operated as specified. In customer applications requiring a very
high level of operational safety and especially in customer applications in which the malfunction
or failure of an electronic component could endanger human life or health (e.g. in accident
prevention or life-saving systems), it must therefore be ensured by means of suitable design of
the customer application or other action taken by the customer (e.g. installation of protective
circuitry or redundancy) that no injury or damage is sustained by third parties in the event of
malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available.
The aforementioned does not apply in the case of individual agreements deviating from the
foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue,
MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI,
SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
9
06/09