FUJITSU VS-12STC-ESM2

POWER RELAY
1 POLE—10A
VS SERIES
RoHS compliant
n FEATURES
UL, CSA, VDE, SEV, SEMKO, CQC recognized
TV-5 is available
lWorking class: C
lUL class B (130°C) insulation
lType of service: continuous duty
lHeavy duty miniature slim type power relay
lHigh isolation in small package
—Insulation distance: 8 mm
—Dielectric strength: 5,000 VAC
(between coil and contacts)
—Surge strength: 10,000 V
lStandard and high sensitivity types available
lFlux free type and plastic sealed type available
lLead Free since date code: 0437L2
Please see page 11 for more information
lCadmium free is available
l
l
n ORDERING INFORMATION
[Example]
VS – 12 S M B U – N – UC
(a) (*) (b) (c) (d) (e) (f ) (g) (h)
(a)
Series Name VS: VS Series
(b)
Nominal Voltage
Refer to the COIL DATA CHART
(c)
Coil Type
Nil: Standard type (700-750 mW)
S : High sensitivity type (530 mW)
(d)
Contact Arrangement
T : 1 form C (SPDT) (non VS-NR type)
M : 1 form A (SPST-NO)
(e)
Enclosure
B : Flux free type
C : Plastic sealed type (with tape)
K : Plastic sealed type
(f)
(g)
Standard
Contact Material
Nil: TV rating type
U : Non TV rating type (standard type)
N : Silver alloy (10A)
Nil: Silver-cadmium oxide (TV-5 rating type)
5 : Silver-cadmium oxide (non TV rating)
Nil: Gold overlay silver-nickel (non TV rating)
E : Silver-nickel (non TV rating)
(h)
Safety Standard
UC : UL, CSS
SM2 : UL, CSA, VDE, SEMKO
IM2 : UL, CSA, VDE, SEV, SEMKO
Note: Actual marking omits the hyphen (-) of (*)
1
VS SERIES
n PART NUMBERS
Standard 700 to 750 mW
Ordering Part Number
Series Coil
Coil
Power
TV
rating
Contact
VS-3M(B, C, K)-(Nil,N)
3
720
VS-5M(B, C, K)-(Nil,N)
5
700
VS-6M(B, C, K)-(Nil,N)
6
720
VS-9M(B, C, K)-(Nil,N)
9
700
B: Flux free
VS-12M(B, C, K)-(Nil,N)
12
720
14
700
18
700
C: Plastic
sealed with
M: 1 form A
tape
VS-24M(B, C, K)-(Nil,N)
24
700
VS-36M(B, C, K)-(Nil,N)
36
700
VS-48M(B, C, K)-(Nil,N)
48
700
VS-60M(B, C, K)-(Nil,N)
60
700
VS-100M(B, C, K)-(Nil,N)
100
750
VS-14M(B, C, K)-(Nil,N)
VS-18M(B, C, K)-(Nil,N)
VS
Ordering Part Number
Series Coil
K: Plastic
sealed
Coil
Power
VS-3(M,T)(B,C,K)U-(Nil,5,E,N)
3
720
VS-5(M,T)(B,C,K)U-(Nil,5,E,N)
5
700
VS-6(M,T)(B,C,K)U-(Nil,5,E,N)
6
720
VS-9(M,T)(B,C,K)U-(Nil,5,E,N)
9
700
VS-12(M,T)(B,C,K)U-(Nil,5,E,N)
12
720
14
700
VS-14(M,T)(B,C,K)U-(Nil,5,E,N)
VS-18(M,T)(B,C,K)U-(Nil,5,E,N)
VS
TV-5
18
700
VS-24(M,T)(B,C,K)U-(Nil,5,E,N)
24
700
VS-36(M,T)(B,C,K)U-(Nil,5,E,N)
36
700
VS-48(M,T)(B,C,K)U-(Nil,5,E,N)
48
700
VS-60(M,T)(B,C,K)U-(Nil,5,E,N)
60
700
VS-100(M,T)(B,C,K)U-(Nil,5,E,N)
100
750
Contact
Material
Safety
Standard
N: Silver
alloy
UC: UL,CSA
SM2: UL,
Nil: Silver
CSA, VDE,
cadmium
SEMKO
oxide
TV
rating
Contact
5: Silver
cadmium oxide
B: Flux
free
C:
Plastic
M: 1 form A sealed
T: 1 form C with
tape
K:
Plastic
sealed
Contact
Material
No
TV-5
N: Silver
alloy
Nil: gold
overlaysilver
nickel
Safety
Standard
UC:
UL,CSA
IM2: UL,
CSA,
VDE,
SEV, SEMKO
E: Silver
nickel
VS SERIES
n PART NUMBERS
High Sensitive type 530 mW
Ordering Part Number
Series
Coil
Coil
Power
TV
rating
Contact
VS-3SM(B, C, K)-(Nil,N)
3
VS-5SM(B, C, K)-(Nil,N)
5
VS-6SM(B, C, K)-(Nil,N)
6
VS-9SM(B, C, K)-(Nil,N)
9
B: Flux free
VS-12SM(B, C, K)-(Nil,N)
12
C: Plastic
sealed with
M: 1 form A
tape
VS-14SM(B, C, K)-(Nil,N)
VS-18SM(B, C, K)-(Nil,N)
VS
14
18
VS-24SM(B, C, K)-(Nil,N)
24
VS-36SM(B, C, K)-(Nil,N)
36
VS-48SM(B, C, K)-(Nil,N)
48
VS-60SM(B, C, K)-(Nil,N)
60
VS-100SM(B, C, K)-(Nil,N)
100
Ordering Part Number
530
K: Plastic
sealed
Series Coil
VS-3S(M,T)(B,C,K)U-(Nil,5,E,N)
3
VS-5S(M,T)(B,C,K)U-(Nil,5,E,N)
5
VS-6S(M,T)(B,C,K)U-(Nil,5,E,N)
6
VS-9S(M,T)(B,C,K)U-(Nil,5,E,N)
9
VS-12S(M,T)(B,C,K)U-(Nil,5,E,N)
12
VS-14S(M,T)(B,C,K)U-(Nil,5,E,N)
VS-18S(M,T)(B,C,K)U-(Nil,5,E,N)
VS
TV-5
14
18
VS-24S(M,T)(B,C,K)U-(Nil,5,E,N)
24
VS-36S(M,T)(B,C,K)U-(Nil,5,E,N)
36
VS-48S(M,T)(B,C,K)U-(Nil,5,E,N)
48
VS-60S(M,T)(B,C,K)U-(Nil,5,E,N)
60
VS-100S(M,T)(B,C,K)U-(Nil,5,E,N)
100
Coil
Power
Contact
Material
Safety
Standard
N: Silver
alloy
UC: UL,CSA
SM2: UL,
Nil: Silver
CSA, VDE,
cadmium
SEMKO
oxide
TV
rating
Contact
530
K:
Plastic
sealed
Safety
Standard
5: Silver
cadmium oxide
B: Flux
free
C:
Plastic
M: 1 form A sealed
T: 1 form C with
tape
Contact
Material
No
TV-5
N: Silver
alloy
Nil: gold
overlaysilver
nickel
UC:
UL,CSA
SM2: UL,
CSA,
VDE,
SEMKO
E: Silver
nickel
VS SERIES
n COIL DATA CHART
Standard
Coil
Voltage
Nominal
Voltage
Max. Coil
Voltage*1
Coil
Resistance
( ±10%)
Must Operate
Voltage*2
Must
Release
Voltage*2
Coil Power
3
3 VDC
4.95 VDC
12.5 Ω
2.1 VDC
0.3 VDC
720 mW
5
5 VDC
8.25 VDC
36 Ω
3.5 VDC
0.5 VDC
700 mW
6
6 VDC
9.90 VDC
50 Ω
4.2 VDC
0.6 VDC
720 mW
9
9 VDC
14.85 VDC
115 Ω
6.3 VDC
0.9 VDC
700 mW
12
12 VDC
19.8 VDC
200 Ω
8.4 VDC
1.2 VDC
720 mW
14
14 VDC
23.1 VDC
280 Ω
9.8 VDC
1.4 VDC
700 mW
18
18 VDC
29.7 VDC
460 Ω
12.6 VDC
1.8 VDC
700 mW
24
24 VDC
39.6 VDC
820 Ω
16.8 VDC
2.4 VDC
700 mW
36
36 VDC
59.4 VDC
1,850 Ω
25.2 VDC
3.6 VDC
700 mW
48
48 VDC
79.2 VDC
3,300 Ω
33.6 VDC
4.8 VDC
700 mW
60
60 VDC
99.0 VDC
5,100 Ω
42.0 VDC
6.0 VDC
700 mW
100
100 VDC
165 VDC
13,400 Ω
70.0 VDC
10.0 VDC
750 mW
High Sensitive
Coil
Voltage
Nominal
Voltage
Max. Coil
Voltage*1
Coil
Resistance
( ±10%)
Must Operate
Voltage*2
Must
Release
Voltage*2
Coil Power
3
3 VDC
4.95 VDC
17 Ω
2.1 VDC
0.3 VDC
530 mW
5
5 VDC
8.25 VDC
47 Ω
3.5 VDC
0.5 VDC
530 mW
6
6 VDC
9.90 VDC
68 Ω
4.2 VDC
0.6 VDC
530 mW
9
9 VDC
14.85 VDC
115 Ω
6.3 VDC
0.9 VDC
530 mW
12
12 VDC
19.8 VDC
270 Ω
8.4 VDC
1.2 VDC
530 mW
14
14 VDC
23.1 VDC
370 Ω
9.8 VDC
1.4 VDC
530 mW
18
18 VDC
29.7 VDC
610 Ω
12.6 VDC
1.8 VDC
530 mW
24
24 VDC
39.6 VDC
1,000 Ω
16.8 VDC
2.4 VDC
530 mW
36
36 VDC
59.4 VDC
2,450 Ω
25.2 VDC
3.6 VDC
530 mW
48
48 VDC
79.2 VDC
4,400 Ω
33.6 VDC
4.8 VDC
530 mW
60
60 VDC
99.0 VDC
6,800 Ω
42.0 VDC
6.0 VDC
530 mW
100
100 VDC
165 VDC
18,860 Ω
70.0 VDC
10.0 VDC
530 mW
Note: All values in the table are measured at 20°C.
*1: No contact current at 20°C
*2: Specified values are subject to pulse wave voltage
VS SERIES
n SPECIFICATIONS
Item
Contact Arrangement
TV-5 Rating Type
Standard
VS-( )M
VS-( )U-5
VS-( )M-N
VS-( )U-N
VS-( )U
VS-( )U-E*
1 form A (SPST-NO), 1 form C, D (SPST-NO)
Material
Silver cadmium-oxide
Silver alloy
Style
Single
Resistance (initial) (at 1A
6VDC)
Max. 100mΩ
Rating (resistive)
10A 240VAC / 24VDC
Max. Carrying Current*1
14A
Max. Switching Power
2400VA / 240W
Max. Switching Voltage
250 VAC / 150VDC
Silver
cadmiumoxide
Silver alloy Gold
overlay
silver nickel
Min. Switching Load*2
100mA 5VDC (M, 5, E), 10mA 5VDC (VS-)
Max. Inrush Current (at
lamp load)
78A 120VAC
Nominal Power (at 20˚C)
Standard type: 700 to 750mW. High sensitive type: 530mW
Operate Power (at 20˚C)
Standard type: 350 to 370mW. High sensitive type: 350mW
Operating Temperature
Standard type: -40ºC to +85ºC. High sensitive type: -40ºC to +75ºC
(no frost)
Time
Value
Operate (at nominal value)
Maximum 15ms
Release (at nominal value)
Maxiumum 10ms
Life
Mechanical
2x107 operations minimum
Coil
Electrical
Other
-
Contact rating
1x105 operations minimum (resistive)
Motor
3x104 operations minimum (at 1/4 HP 120VAC motor)
Lamp
5x104 operations minimum
(at 78A 120VAC, lamp)
1.5x104 operations minimum (high sensitive type)
Vibration
Resistance
Misoperation
10 to 55 Hz (double amplitude of 1.5mm)
Endurance
10 to 55 Hz (double amplitude of 1.5mm)
Shock
Resistance
Misoperation
100m/s2 (11±1m/s)
Endurance
1,000m/s2 (6±1m/s)
Weight
-
Approximately 17g
*1 When max. carrying current is more than 10A, PCB layout needs to be considered.
*2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test
with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
VS SERIES
n SAFETY STANDARDS
Type
Compliance
Contact rating
UL
UL 508
Flammability: UL 94-V0 (plastics)
[TV-rating VS-( )M, SM, M-N]
10A, 240VAC/24VDC (resistive)
1/3 hp, 240VAC/120VAC
Pilot duty: C150
TV-5 120 VAC
[UN, SU-N]
15A, 120VAC/24VDC (resistive)
10A, 240VAC (resistive)
1/3 hp, 240VAC/120VAC
Pilot duty: B150
[VS-( ) ( ) U-( ), ( )S( ) U-( )]
10A, 240VAC/24VDC (resistive)
1/3 hp, 240VAC/120VAC
Pilot duty: C150
E56140
1
C22.2 No. 14
LR 35579
VDE
0435, 0631, 0700, 0860
Complies with SEV, SEMKO, NEMKO, DEMKO, FIMKO, CQC, VDE,
n
INSULATION
Item
VS
Note
Resistance (initial)
Minimum 1,000 MΩ 1 min.
at 500 VDC
Dielectric
Strength
open contacts
1,000 VAC (50/60 Hz) 1 min. 10mA detection current
coil and contacts
5,000 VAC (50/60 Hz) 1 min. 10mA detection current
Surge Voltage (coil and contact)
10,000 V
Clearance/Creepage
8 mm / 8 mm
Insulation (DIN EN61810-1 VDE0435)
Voltage
Pollution
Isolation material group
250 V
2
III
1.2 x 50µs standard wave
VS SERIES
n CHARACTERISTIC DATA
Coil Temperature Rise (Standard Type)
120
Temperature Rise (deg.)
100
80
10A
60
0A
40
20
0
0.4
0.8
1.2
Coil Power (W)
1.6
2.0
Maximum Switching Power
Switching Current (A)
AC resistive
TV-8 rated
Standard
Contact Voltage (V)
VS SERIES
n REFERENCE DATA
VS SERIES
n DIMENSIONS
l Dimensions
VS-M type
l Schematics
(BOTTOM VIEW)
l PC board mounting
hole layout
(BOTTOM VIEW)
3.5
VS type
3.5 3.5
VS-MK type (Plastic sealed type)
3.5
Unit: mm
VS SERIES
VS-K type (Plastic sealed type)
3.5 3.5
VS-MC type (Plastic sealed type with tape)
VS-C type (Plastic sealed type with tape)
Unit: mm
10
VS SERIES
RoHS Compliance and Lead Free Relay Information
1. General Information
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu.
l All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office. l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
l
2. Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu.
Reflow Solder condition
Flow Solder condition:
Pre-heating:
Soldering:
maximum 120˚C
dip within 5 sec. at 260˚C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature: maximum 360˚C
Duration:
maximum 3 sec.
We highly recommend that you confirm your actual solder conditions
3. Moisture Sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l
Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
11
VS SERIES
Fujitsu Components International Headquarter Offices
Japan
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Web: www.fcl.fujitsu.com
Europe
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fax: (1-408) 745-4970
Email: [email protected]
Web: http://www.fujitsu.com/us/services/edevices/components/
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (65) 6273-3021
Email: [email protected]
Web: http://www.fujitsu.com/sg/services/micro/components/
©2009 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. November 20, 2009.
12