MIL-DTL-38999 Connectors 240-384W MIL-DTL-38999 Series IV Filter Connector Wall Mount Receptacle Contact Gender P - Pin S - Socket MIL-DTL-38999 Series IV Filter Connector Product Code B Insert Arrangement IAW MIL-STD-1560 240 - 384 W Shell Style W - Wall Mount M Alternate Key Position Per MIL-DTL-38999 A, B, C, D, K, L, M, R, U N = Normal Filter Type (See Table IV) 10-35 P S Termination P - PC Tail S - Solder Cup Connector Class (See Table III) P Capacitance (See Table II) C N N Flange Mounting Style N - Not Applicable/Mfgs. Option H - Round Holes, Chamfered C - Clinch Nuts (4-40 UNC) M - Metric Clinch Nuts (M3) W - Wall Mount 1.50 Max Master Key .098 Max 4x B BSC 1.019 .956 4x Chamfered or Rounded .025 Typ PC Tail A H G B K A Sq. F J C C D E Solder Cup 4 x D Holes .175 Max Panel Thickness .125 Min .035 .007 © 2008 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-42 E-Mail: [email protected] MIL-DTL-38999 Connectors 240-384W MIL-DTL-38999 Series IV Filter Connector Wall Mount Receptacle TABLE I: CONNECTOR CLASS TABLE IV Filter Type SYM CLASS MATERIAL M Environmental Aluminum Electroless Nickel P PI Circuit MT Environmental Aluminum Nickel Fluorocarbon Polymer (Ni-PTFE) C C Circuit NF Environmental Aluminum Cadmium O.D. Over Electroless Nickel P Environmental Stainless Steel ZN Environmental Aluminum H2 Hermetic Stainless Steel FINISH DESCRIPTION SYM Electro-Deposited Nickel B Zinc-Nickel Over Electroless Nickel Electroless Nickel TABLE II: CAPACITOR ARRAY CODE CAPACITANCE RANGE CLASS PI - CIRCUIT (pF) 4x Ø G Holes C - CIRCUIT (pF) X* 160,000 - 240,000 80,000 - 120,000 Y* 80,000 - 120,000 40,000 - 60,000 Z* 60,000 - 90,000 30,000 - 45,000 A 38,000 - 56,000 19,000 - 28,000 B 32,000 - 45,000 16,000 - 22,500 C 18,000 - 33,000 9,000 - 16,500 D 8,000 - 12,000 4,000 - 6,000 E 3,300 - 5,000 1,650 - 2,500 F 800 - 1,300 400 - 650 G 400 - 600 200 - 300 H H H Back Panel Mounting * Reduced DWV – Please consult factory. Ø E Min. Front Panel Mounting Ø F Min. TABLE III SHELL SIZE CODE SHELL SIZE A Sq B BSC B 11 1.051 1.008 C 13 D C D ØE ØF ØG Diameter Diameter Min. Min. Holes .812 .793 .778 .138 .122 .781 .625 .133 .123 .817 .807 1.145 1.102 .906 .919 .904 .138 .122 .921 .750 .133 .123 .911 .901 15 1.240 1.197 .969 1.044 1.029 .138 .122 1.047 .906 .133 .123 .973 .963 E 17 1.334 1.291 1.062 1.170 1.155 .138 .122 1.218 1.016 .133 .123 1.067 1.057 F 19 1.460 1.417 1.156 1.294 1.279 .138 .122 1.296 1.142 .133 .123 1.161 1.151 G 21 1.583 1.539 1.250 1.419 1.404 .138 .122 1.421 1.266 .133 .123 1.255 1.245 H 23 1.709 1.665 1.375 1.544 1.529 .157 .142 1.546 1.375 .159 .149 1.380 1.370 J 25 1.835 1.791 1.500 1.670 1.654 .157 .142 1.672 1.484 .159 .149 1.505 1.495 © 2008 Glenair, Inc. CAGE CODE 06324 H Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-43 E-Mail: [email protected]