Composite Backshells 447-657 Composite Low-Profile Micro Band-in-a-Can Backshell with Strain-Relief Clamp and Self-Locking Rotatable Coupling A A F H MIL-DTL-5015, -26482 Series II, and -83723 Series I and III Connector Designator A, F or H MIL-DTL-38999 Series I, II MIL-DTL-38999 Series III and IV 447 SELF-LOCKING ROTATABLE COUPLING F S Connector Shell Size (See Table II) .88 Metric dimensions (mm) are in parenthesis and are for reference only. 2. Coupling nut supplied unplated. 3. See Table I in Intro for front-end dimensional details. Cable Entry F G TABLE III: FINISH Symbol Max Dash Number (Table II) F H 08 08 09 01 01 10 10 11 01 02 F, H 12 12 13 04 04 14 14 15 04 05 16 16 17 05 06 18 18 19 06 06 20 20 21 07 07 22 22 23 08 08 24 24 25 09 09 28 - - 10 10 32 - - 10 10 36 - - 10 10 40 - - 10 10 © 2009 Glenair, Inc. L Knurl Style Mfr Option TABLE II SHELL SIZE A K Stainless Saddle Bar and Screw Washer D E Cable Entry (See Table IV) .560 Max For angled part requirements, use in conjuncion with Glenair 327-060 Extenders A S 600-057-1Micro Band 1. Shell Size Slot Option S - Pigtail Termin. Slot (Omit for none) Band Option K - Pre-Coiled Band (Omit for none) 657 XM 18 04 K NOTES C (See Table III) Basic Part Number Angle and Profile S - Straight STANDARD PROFILE B Finish Symbol Product Series 447 - EMI/RFI Non-Environmental Banding Backshells CONNECTOR DESIGNATOR: Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/Olive Drab over Electroless Nickel TABLE IV: CABLE ENTRY Dash Number K Max L Max 01 02 03 04 05 06 07 08 09 10 .843 (21.4) .968 (24.6) 1.046 (26.6) 1.156 (29.4) 1.218 (30.9) 1.343 (34.1) 1.468 (37.3) 1.593 (40.5) 1.718 (43.6) 1.843 (46.8) .78 (19.8) .97 (24.6) 1.05 (26.7) 1.15 (29.2) 1.22 (31.0) 1.34 (34.0) 1.47 (37.3) 1.59 (40.4) 1.72 (43.7) 1.84 (46.7) CAGE Code 06324 Cable Entry Min Max .125 (3.2) .156 (4.0) .250 (6.4) .280 (7.1) .375 (9.5) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) .250 (6.4) .375 (9.5) .438 (11.1) .500 (12.7) .625 (15.9) .750 (19.1) .875 (22.2) 1.000 (25.4) 1.125 (28.6) 1.250 (31.8) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-86