Precision Thin Film Chip Resistors IRC Advanced Film Division PFC Series • Standard 60/40 Sn/Pb and Pb-free (RoHS compliant) terminations available Ultra stable Tantalum Nitride resistor film system • Available in 0402, 0603, 0805, 1206, 1505, 2010 and 2512 chip sizes • Tested for COTS applications • Absolute TCR to ±10ppm/°C • MIL screening available Non-leaching Nickel barrier Wrap around termination The IRC TaNFilm® PFC chip resistor series provides the high precision and ultra stable performance of our Tantalum Nitride resistive film system in 0402, 0603, 0805, 1206, 1505, 2010 and 2512 sizes. The unique characteristics of the passivated Tantalum Nitride film insure long term life stability and stability in most environments. Using the same manufacturing line as the PFC Military Series, IRC’s precision chips maintain the same superior environmental performance. Specially selected materials and processes insure initial precision is maintained in the harshest surface mount soldering environment. Wrap-around terminations with leach-resistant nickel barriers insure high integrity solder connections. Electrical Data Model Power Rating (70°C) Max Voltage Rating (≤ √ P x R) W0402 50mW 75V W0603 100mW 75V W0805 250mW 100V W1206 333mW 200V W1505 350mW 100V W2010 800mW 175V W2512 1.0W 200V Temperature Range -55°C to +150°C ESD Sensitivity 2KV to 4KV (HBM) Noise Termination Substrate <-25dB 60/40 Sn/Pb or 100% tin (RoHS compliant) plated over nickel barrier 99.5% Alumina General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com A subsidiary of TT electronics plc PFC Series Issue May 2008 Sheet 1 of 4 Precision Thin Film Chip Resistors IRC Advanced Film Division Manufacturing Capabilities Data Tolerance W0402 50Ω 30K Ω ±25, ±50 or ±100 ppm/°C Resistance Range TCR ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05%, ±0.02% ±5%, ±2%, ±1%, ±0.5%, ±0.1%, ±0.05% Tolerance ±5%, ±2%, ±1%, ±0.5%, ±0.1% W0603 W0805 W1206 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 100Ω 100Ω 100Ω 200Ω 200Ω 200Ω 50KΩ 100KΩ 400KΩ 75KΩ 180KΩ 650KΩ 100KΩ 267KΩ Resistance Range 1.0MΩ ±50 or ±100 ppm/°C TCR ±25 ppm/°C ±15 ppm/°C ±10 ppm/°C Tolerance W1505 W2010 W2512 5Ω 5Ω 5Ω 10Ω 10Ω 10Ω 50Ω 50Ω 50Ω 400KΩ 400KΩ 400KΩ 650KΩ 650KΩ 650KΩ 1.0MΩ 1.0MΩ 1.0MΩ Resistance Range TCR © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com PFC Series Issue May 2008 Sheet 2 of 4 Precision Thin Film Chip Resistors IRC Advanced Film Division Environmental Data Performance Environmental Test MIL-PRF-55342 Maximum ∆R per Characteristic E Typical Maximum Thermal Shock ±0.10% ±0.02% ±0.10% Low Temperature Operation ±0.10% ±0.01% ±0.05% Short Time Overload ±0.10% ±0.01% ±0.05% High Temperature Exposure ±0.10% ±0.03% ±0.10% Effects of Solder ±0.20% ±0.01% ±0.10% Moisture Resistance ±0.20% ±0.03% ±0.10% Life ±0.50% ±0.03% ±0.10% % Of Rated Power Power Derating Curve Temperature ( °C) © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com PFC Series Issue May 2008 Sheet 3 of 4 Precision Thin Film Chip Resistors IRC Advanced Film Division Physical Data L a TOP SIDE BOTTOM W H b Model L W H a b W0402 0.040" ±0.002 0.021" ±0.002 0.012" ±0.003 0.008" ±0.002 0.010" ±0.002 W0603 0.063" ±0.004 0.031" ±0.004 0.020" ±0.004 0.012" ±0.005 0.015" ±0.005 W0805 0.081" ±0.005 0.050" ±0.005 0.020" ±0.006 0.015" ±0.008 0.016" ±0.008 W1206 0.126" ±0.006 0.063" ±0.005 0.024" ±0.004 0.025" ±0.010 0.025" ±0.010 W1505 0.155" ±0.007 0.050" ±0.005 0.024" ±0.004 0.020" ±0.010 0.020" ±0.010 W2010 0.203" ±0.007 0.103" ±0.005 0.024" ±0.004 0.020" ±0.008 0.020" ±0.008 W2512 0.255" ±0.007 0.124" ±0.005 0.024" ±0.004 0.020" ±0.008 0.020" ±0.008 MIL Screened Precision Chip Resistors IRC’s PFC chip resistors are available with MIL screening. These chips are manufactured on the same production line as our Milqualified chip resistors and screened in accordance with MIL-PRF-55342. These chips are identified with IRC’s ordering information and not with MIL marking. Commercial Ordering Data Mil Screened Ordering Data* Prefix Prefix PFC - W1206 R - 01 - 1001 - B Model Model Termination Termination W0402; 0603; W0805; W1206 W1505; W2010; W2512 R = 60/40 Sn/Pb plated solder LF = 100% tin plated (Pb-free) PFC - W1206 R - 04 - 1001 - B W0402; W0603; W0805; W1206 W1505; W2010; W2512 R = 60/40 Sn/Pb plated solder MIL-Screened TCR Code TCR Code 01 = ±100ppm/°C; 02 = ±50ppm/°C; 03 = ±25ppm/°C 11 = ±15ppm/°C; 12 = ±10ppm/°C Resistance Code 4-Digit resistance code. Ex: 10R0 = 10Ω; 1000 = 100Ω 1001 = 1000Ω; 1002 = 10KΩ 04 = ±300ppm/°C; 05 = ±100ppm/°C; 06 = ±50ppm/°C 07 = ±25ppm/°C; 14 = ±20ppm/°C; 15 = ±15ppm/°C 16 = ±10ppm/°C Resistance Code 4-Digit resistance code. Ex: 10R0 = 10Ω; 1000 = 100Ω 1001 = 1000Ω; 1002 = 10KΩ Tolerance Code Tolerance Code For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. *Please refer to our MIL-Chip Series datasheet to order parts qualified to MIL-PRF-55342. J = ±5%; G = ±2%; F = ±1%; D = ±0.5% B = ±0.1%; A = ±0.05%; Q = ±0.02% © IRC Advanced Film Division • Corpus Christi Texas 78411 USA J = ±5%; G = ±2%; F = ±1%; D = ±0.5% B = ±0.1%; A = ±0.05%; Q = ±0.02% Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com PFC Series Issue May 2008 Sheet 4 of 4