Platinum Temperature Sensor IRC Advanced Film Division RTD Series • High stability Platinum based sensor • High resolution, accuracy and interchangeability • Compatible with automatic placement equipment • Wide temperature range - Very fast response time • Surface mount package available with SnPb and Pb-free terminations Electrical Data P1206 P0805 P0603 0.13°C /mW 0.13°C/mW 0.14°C/mW 100Ω, 1.0KΩ 100Ω 100Ω Self Heating Available Resistances Resistance Tolerances ±0.5%, ±1%, ±2%, ±5% Operating Temperature Range -55°C to +150°C Temperature Coefficient +3850 ppm/°C Insulation Resistance The temperature sensor is a conventional thin film platinum RTD in a surface mount package designed for temperature sensing, over-temperature protection and temperature compensation in any application where printed circuit board temperature sensing is desired. 10MΩ minimum at 25°C Recommended Measuring Current ≤1mA Long term Stability (10,000 hours at 125°C) <0.05% Termination 60/40 SnPb or 100% Sn * Temperature coefficient in accordance with IEC751 Performance Data Settling Response Time P1206 P0805 P0603 Rapidly Stirred Oil 0.2s (t0.5) 0.6s (t0.9) 0.1s (t0.5) 0.4s (t0.9) 0.1s (t0.5) 0.4s (t0.9) Air @ 1m/s 1.8s (t0.5) 6s (t0.9) 1.2s (t0.5) 4.2s (t0.9) 1.1s (t0.5) 3.7s (t0.9) General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC’s own data and is considered accurate at time of going to print. © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com A subsidiary of TT electronics plc RTD Series Issue February 2006 Platinum Temperature Sensor IRC Advanced Film Division Physical Data L a TOP SIDE BOTTOM W H b L W H a b P0603 0.063”±0.004” 0.031”±0.004” 0.020”±0.004” 0.008”±0.004” 0.008”±0.004” P0805 0.081”±0.005” 0.050”±0.005” 0.020”±0.006” 0.016”±0.008” 0.016”±0.008” P1206 0.126”±0.006” 0.063”±0.005” 0.024”±0.004” 0.016”±0.008” 0.016”±0.008” Ordering Data RTD - P1206 - 43 - 1001 - D Model P1206 = 1206 chip with standard SnPb terminations P1206LF = 1206 chip with Pb-Free terminations P0805 = 0805 chip with standard SnPb terminations P0805LF = 0805 chip with Pb-Free terminations P0603 = 0603 chip with standard SnPb terminations P0603LF = 0603 chip with Pb-Free terminations Temperature Coefficient 42 = +3850 ppm/°C ±100 ppm/°C 43 = +3850 ppm/°C ± 50 ppm/°C Resistance Code Standard 4 Digit Resistance Code Ex: 1000 = 100Ω; 1001 = 1000Ω Tolerance Code D= ±0.5% F= ±1.0% G=±2.0% J=±5.0% For additional information or to discuss your specific requirements, please contact our Applications Team using the contact details below. © IRC Advanced Film Division • Corpus Christi Texas 78411 USA Telephone: 361 992 7900 • Facsimile: 361 992 3377 • Email: [email protected] • Website: www.irctt.com RTD Series Issue February 2006