Optical Switch Module OSM Optical Switch Module The Polatis OSM family is a series of high performance, fully non-blocking optical switch modules. Designed for OEM integration, the OSM is an ideal product where small size and superior optical performance are required. All drive and control electronics are provided, with options for either serial RS-232 or a high speed interface. Easily integrated onto standard telecom blades, the small form-factor OSM forms the key element of a reconfigurable optical core. Whether used for hybrid OEO/OOO network switches, IP over optical or client-side switching, the OSM provides fast and reliable reconfiguration, with absolute minimal impact on pre-engineered loss budgets. The OSM is also well suited to integrated test systems and for component & module manufacturing test. DirectLight® Technology The OSM is available in both symmetric (NxN) and asymmetric (MxN) port configurations, with package options allowing for either Normal or Extended operating environments. Polatis also offers multimode OSM and Reconfigurable single mode OSM products, as well as a range of rackmount optical switch systems and standard backplane optical cards. Key Features • Compact size, easy to integrate • Fully integrated drive/control electronics • Extended environmental range • Ultra-low insertion loss • High signal stability • Low polarization dependent loss • Fast switching speed • High power handling • Dark fiber switching • Fully non-blocking • Bi-directional operation • RS232 interface All Polatis products are based on the patented DirectLight beam-steering technology, setting the benchmark for reliable, high performance switching. Applications • Hybrid OEO/OOO network switches • Network OEM system integration • ROADM • Automated manufacturing test • Client-side OOO switching • Remote network monitoring & test access • Network IP over optical routing • Automated component test • High power laser switching • RF over fiber • Shipboard communications • Secure communication networks High performance optical switch solutions Packaging Information Performance Specifications Fiber Count Designator C D Insertion Loss 1 <1.0dB <1.4dB Polarization Dependent Loss <0.05dB <0.1dB Crosstalk <-70dB <-60dB Operating Wavelength Range 1260-1625nm Wavelength Dependent Loss <0.3dB (C+L Band) Repeatability <±0.05dB Return Loss >55dB Switching Time <17ms Maximum Optical Power 3 +27dBm Switch Lifetime 108 cycles 2 Fiber Count Environment Module Dimensions (mm) Normal 273 178 38 8-32 Extended 260 170 38 Normal 310 230 Ordering Information Operating Temp (Extended) -10° to +60°C, <90% RH non-condensing Storage Temp (Normal) -40° to +70°C, <40% RH non-condensing OSM - x - 1-R D Storage Temp (Extended) -40° to +70°C, <95% RH non-condensing Fibers 4-32 Input 8-32 Reconfigurable Fibers 4-32 Output CC = Reconfigurable Connector L = LC F = FC C = SC T = ST U = MU Polish U = UPC A = APC Fiber 1 = Single mode 9/125µm Interface R = RS232 Protocol S = SCPI C = Command Line Interface Power D = DC Environmental N = Normal E = Extended Customization S = Standard V = Non-standard Variant Designed to meet EN60950 Designed to meet Telcordia GR1073 EN60950 All parameters are measured excluding connectors at 1550nm and 20°C with an unpolarized source after thermal equalization unless stated. 1. Measured using a 3 patch-cord method as defined in TIA/EIA-526-14A. 2. With APC connectors return loss >70dB without connectors. 3. Switch will operate on dark fiber. The performance characteristics of the switch modules vary according to the fiber count. Fiber Count 04 08 12 16 20 24 28 32 CC C C C C D D D D C C C C D D D D C C C C D D D D C C C C D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D 04 08 12 16 20 24 28 32 25W The part numbering scheme for Polatis products is as follows: + 5° to +45°C, <85% RH non-condensing Qualification (Extended) 15W 120 33-64 Extended 290 309 100 Operating Temp (Normal) Qualification (Normal) For More Information Visit our website: www.jdsu.com E-mail us: [email protected] PROD-401-04-0-S AUGUST 2007 Power Dissipation Phone us: North American Sales: 1 866 228 3762 Latin American Sales: +55 11 5503 3800 Asia Pacific Sales: +852 2892 0990 EMEA Sales: +49 7121 86 2222 Copyright © 2007 Polatis Inc. All rights reserved. All information in this document is provided for informational purposes only and is subject to change without notice. Polatis Inc. assumes no liability for actions taken based on information contained herein.