COMMUNICATIONS MODULES & SUBSYSTEMS
RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers;
Extended/Industrial Temperature & Voltage
PLRXPL-VE-SG4-38 and PLRXPL-VI-SG4-38
Key Features
• Compliant with industry-wide physical and optical specifications
• Lead-free and RoHS-compliant
• Cost effective SFP solution
• FC/Ethernet performance
• Enables higher port densities
• Enables greater bandwidth
• Proven high reliability
Applications
• High-speed storage area networks
- Switch and hub interconnect
- Mass storage systems interconnect
- Host adapter interconnect
• Computer cluster cross-connect
• Custom high-speed data pipes
• Short Reach Ethernet
This lead-free and RoHS-compliant multi-rate Small Form Factor Pluggable
(SFP) transceiver provides superior performance for Fibre Channel applications,
and is another in the JDSU family of products customized for high speed, shortreach SAN, and intra-POP applications. The multi-rate feature enables its use in
a wider range of system applications. It is Electro-Optically compliant with FC-PI
100-M5/M6-SN-I, 200-M5/M6-SN-I, 400-M5/M6-SN-I and 1000Base-SX specifications. The rate select pin (pin 7) along with the software rate select bit provide receiver bandwidth switching between 4.25G /2.125G and 2.125/1.0625G line
rates for optmized link performance enabling hardware or software based rate-negotiation system architectures. JDSU’s improved housing provides superior EMI
performance for demanding 4GFC applications. This transceiver features a highly
reliable 850 nm oxide vertical-cavity surface-emitting laser (VCSEL) coupled to a
LC optical connector. Its small size allows for high-density board designs that, in
turn, enable greater total aggregate bandwidth.
Highlights
• 4GFC, 2GFC, and 1GFC and 1GBE multiple rate performance enables flexible
system design, and configuration, while maximizing bandwidth
• Lead-free and RoHS-compliant per Directive 2002/95/EC
• Enhanced digital diagnostic feature set allows real-time monitoring of
transceiver performance and system stability.
• Bail mechanism enables superior ergonomics and functionality in all port configurations
• Extended/Industrial voltage and extended temperature
• MSA-compliant small form factor footprint enables high port density and keeps
overall system cost low
• Serial ID allows customer and vendor system specific information to be placed
in transceiver
• All-metal housing provides superior EMI performance
NORTH AMERICA: 800 498-JDSU (5378)
WORLDWIDE: +800 5378-JDSU
WEBSITE: www.jdsu.com
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
2
Features
• Uses a JDSU high-reliability, highspeed, 850 nm, oxide VCSEL
• Lead-free and RoHS-compliant
• Hot pluggable
• Digital diagnostics, SFF-8472 rev 9.5
compliant
• Compliant with Fibre Channel
400-M5/M6-SN-1, 200-M5/M6-SN-I,
100-M5/M6-SN-I and 1000Base-SX
• Selectable 4G/2G/1G receiver
bandwidth with rate select pin 7 or
through digital diagnostics interface
• Low nominal power consumption
(< 400 mW)
• -20˚C to 85˚C operating temperature
range for PLRXPL-VE-SG4-38
• -40˚C to 85˚C operating temperature
range for PLRXPL-VI-SG4-38
• Single +3.3 V power supply
• ±10% extended operating voltage range
• Bit error rate < 1 x 10-12
• OC transmit disable, loss of signal
and transmitter fault functions
• CDRH and IEC 60825-1 Class 1 laser
eye safe
• FCC Class B compliant
• ESD Class 2 per MIL-STD 883
Method 3015
• UL-94 V-0 certified
• Internal AC coupling on both transmit
and receive data signals
An eye-safe, cost effective serial transceiver, the PLRXPL-VE-SG4-38 and PLRXPL-VISG4-38 feature a small, low power, pluggable package that manufacturers can upgrade in the field, adding bandwidth incrementally. The robust mechanical design
features a unique all-metal housing that provides superior EMI shielding.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
3
Section 1
Functional Description
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 850 nm VCSEL Gigabit Transceiver
is designed to transmit and receive 8B/10B encoded serial optical data over 50/125
µm or 62.5/125 µm multimode optical fiber. This transceiver is lead-free and
RoHS-compliant per Directive 2002/95/EC.
Transmitter
The transmitter converts 8B/10B encoded serial PECL or CML electrical data into serial optical data meeting the requirements of 100-M5/M6-SN-I, 200-M5/M6-SN-I,
400-M5/M6-SN-I Fibre Channel and 1000Base-SX Ethernet specifications. Transmit
data lines (TD+ & TD-) are internally AC coupled with 100 Ω differential termination.
An open collector compatible Transmit Disable (Tx_Dis) is provided. This pin is
internally terminated with a 10 kΩ resistor to VccT. A logic “1,” or no connection
on this pin will disable the laser from transmitting. A logic “0” on this pin provides
normal operation.
The transmitter has an internal PIN monitor diode that is used to ensure constant
optical power output across supply voltage and temperature variations.
An open collector compatible Transmit Fault (TFault) is provided. The Transmit Fault
signal must be pulled high on the host board for proper operation. A logic “1” output
from this pin indicates that a transmitter fault has occurred, or the part is not fully seated and the transmitter is disabled. A logic “0” on this pin indicates normal operation.
The extinction ratio of the transmitter is automatically increased to meet the requirements of 1000BASE-SX Ethernet specifications when the Rate Select pin and
software bit are set to “low”.
Receiver
The receiver converts 8B/10B encoded serial optical data into serial PECL/CML
electrical data. Receive data lines (RD+ and RD-) are internally AC coupled with 100 Ω
differential source impedance, and must be terminated with a 100 Ω differential load.
Rate select, pin 7, switches the receiver bandwith enabling superior performance at
4.25 Gbps, 2.125 Gbps, and 1.0625 Gbps line rates. When rate-select is set “high”
(4.25/2.125 Gbps mode) the receiver bandwidth is not compliant to the maximum
receiver bandwidth specified under 100-M5/M6-SN-I.
Table 1 FC Compliance with Rate Select
Parameter
100-M5/M6-SN-I
High
Low
No1
Yes2
1. Not compliant to receiver bandwidth
2. Also 1000Base-SX compliant
200-M5/M6-SN-I
Yes
Yes
400-M5/M6-SN-I
Yes
No1
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
4
An open collector compatible Loss of Signal is provided. The LOS must be pulled
high on the host board for proper operation. A logic “0” indicates that light has
been detected at the input to the receiver (see Section 2.5 Optical characteristic,
Loss of Signal Assert/Deassert Time on page 9). A logic “1” output indicates that
insufficient light has been detected for proper operation.
Power supply filtering is recommended for both the transmitter and receiver. Filtering should be placed on the host assembly as close to the Vcc pins as possible
for optimal performance.
Recommended “Application Schematics” are shown in Figure 2 on page 5.
16 Transmitter Power Supply
10K Ω
3 Transmitter Disable In
Vcc_T
TDis
18 Transmitter
Positive Data In
TD+
Vcc_T
50 Ω
Laser Driver
TOSA
50 Ω
TDT_Gnd
19 Transmitter
Negative Data In
T_Fault
2 Transmitter Fault Out
1, 17, 20 Transmitter
Signal Ground
Management
SCL
Processor
5 MOD_DEF(1) Serial ID Clock
4 MOD_DEF(2) Serial ID Data
SDA
EEPROM
6 MOD_DEF(0)
15 Receiver Power Supply
Vcc_R
50 Ω
Vcc_R
RD-
ROSA
RECEIVER
50 Ω
RD+
R_Gnd
R_Gnd
12 Receiver Negative
Data Out
13 Receiver Positive
Data Out
7 Rate Select
LOS
30 kΩ
8 Loss of Signal Out
9, 10, 11, 14 Receiver
Signal Ground
Figure 1
Block diagram
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
5
Section 2
Application Schematics
Recommended connections to the PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38
transceiver are shown in Figure 2 below.
10K
R1 *
50
Receiver (Tx Fault)
Open Collector
Driver (Tx Disable)
*
Z = 100
SFP Host Connector
10K
Open Collector
Bidirectional
{Mod_Def(2)}
Open Collector
Bidirectional
{Mod_Def(1)}
PECL
Driver
(TX DATA)
10K
10K
Receiver
{Mod_Def(0)}
1 VeeT
2 Tx Fault
TD- 19
3 Tx Disable
TD+ 18
4 MOD_DEF(2)
VeeT 17
5 MOD_DEF(1)
VccT 16
6 MOD_DEF(0)
VccR 15
7 Rate select
8 LOS
Receiver and
Transmitter
Rate Select
10K
VeeT 20
VeeR 14
RD+ 13
9 VeeR
RD- 12
10 VeeR
VeeR 11
R2 *
50
C3
L1
1 H
0.1 F
L2
1 H
C4
0.1uF
+3.3V
Vcc
Input
C2
C1
0.1 F
10 F
C5
10 u F
*
R3
50
*
PECL
Receiver
(RX DATA)
Z = 100
Receiver (LOS)
R4 *
50
Notes
Power supply filtering components should be placed as close to the Vcc pins of the host connector as possible for optimal performance.
PECL driver and receiver will require biasing networks. Please consult application notes from suppliers of these components. CML I/O on the PHY are supported.
MOD_DEF(2) and MOD_DEF(1) should be bi-directional open collector connections in order to implement serial ID (MOD_DEF[0,1,1]) PLRXPL-VE-SG4-38 transceiver.
R1 and R2 may be included in the output of the PHY. Check application notes of the IC in use.
* Transmission lines should be 100 Ω differential traces. It is recommended that the termination resistor for the PECL Receiver (R3 + R4) be placed beyond the input pins of the
PECL Receiver. Series Source Termination Resistors on the PECL Driver (R1+R2) should be placed as close to the driver output pins as possible
Figure 2
Recommended application schematic for the PLRXPL-VE-SG4-38/ PLRXPL-VI-SG4-38 transceiver
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
6
2.1
Technical data
Technical data related to the RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers;
Extended/Industrial Temperature and Voltage includes:
• Section 2.2
Pin function definitions below
• Section 2.3
Absolute maximum ratings on page 8
• Section 2.4
Electrical characteristics on page 8
• Section 2.5
Optical characteristic on page 9
• Section 2.6
Link length on page 11
• Section 2.7
Regulatory compliance on page 12
• Section 2.8
PCB layout on page 13
• Section 2.9
Front panel opening on page 14
• Section 2.10
Module outline on page 14
• Section 2.11
Transceiver belly-to-belly mounting on page 15
2.2
Pin function defi nitions
1
2
TXFault
3
TX Disable
4
Towards
Bezel
Figure 3
5
6
VeeT
20
TD-
19
TD+
18
VeeT
17
VccT
16
VeeT
MOD-DEF(2)
MOD-DEF(1)
VccR
15
VeeR
14
MOD-DEF(0)
7
Rate Select
8
LOS
9
VeeR
10
VeeR
RD+
13
RD-
12
VeeR
11
Transceiver pin descriptions
Towards
ASIC
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
7
Table 2 Transceiver pin descriptions
Pin Number
Symbol
Name
Description
Receiver
8
LOS
Loss of Signal Out (OC)
9, 10, 11, 14
12
VeeR
RD-
Receiver Signal Ground
Receiver Negative DATA
Out (PECL)
13
RD+
Receiver Positive DATA
Out (PECL)
15
VccR
Receiver Power Supply
7
Rate
Rate Select (LVTTL)
Sufficient optical signal for potential BER < 1x10-12 = Logic “0”
Insufficient optical signal for potential BER < 1x10-12 = Logic “1”
This pin is open collector compatible, and should be pulled
up to Host Vcc with a 10 kΩ resistor.
These pins should be connected to signal ground on the host board.
Light on = Logic “0” Output
Receiver DATA output is internally AC coupled and series
terminated with a 50 Ω resistor.
Light on = Logic “1” Output
Receiver DATA output is internally AC coupled and series
terminated with a 50 Ω resistor.
This pin should be connected to a filtered +3.3V power supply
on the host board. See Application schematics on page 5 for
filtering suggestions.
This pin should be connected to the auto-negotiation rate
select function
Logic “1” = 4.25Gbps/2.125Gbps receiver bandwidth optimization
Logic “0” = 2.125Gbps/1.25Gbps receiver bandwidth optimization
and Transmitter Extinction Ratio settings meets the requirements
of 1000Base-SX Ethernet Standards
Transmitter
3
TX Disable
Transmitter Disable In (LVTTL)
1, 17, 20
2
VeeT
TX Fault
Transmitter Signal Ground
Transmitter Fault Out (OC)
16
VccT
Transmitter Power Supply
18
TD+
Transmitter Positive DATA In
(PECL)
19
TD-
Transmitter Negative DATA In
(PECL)
Module Definition
6, 5, 4
MOD_DEF(0:2)
Module Definition Identifiers
Logic “1” Input (or no connection) = Laser off
Logic “0” Input = Laser on
This pin is internally pulled up to VccT with a 10 kΩ resistor.
These pins should be connected to signal ground on the host board.
Logic “1” Output = Laser Fault (Laser off before t_fault)
Logic “0” Output = Normal Operation
This pin is open collector compatible, and should be pulled
up to Host Vcc with a 10 kΩ resistor.
This pin should be connected to a filtered +3.3V power supply
on the host board. See Application schematics on page 5 for
filtering suggestions.
Logic “1” Input = Light on
Transmitter DATA inputs are internally AC coupled and
terminated with a differential 100 Ω resistor.
Logic “0” Input = Light on
Transmitter DATA inputs are internally AC coupled and
terminated with a differential 100 Ω resistor.
Serial ID with SFF 8472 Diagnostics (See section 3.1)
Module Definition pins should be pulled up to Host Vcc with
10 kΩ resistors.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
8
2.3
Absolute maximum ratings
Parameter
Symbol
Ratings
Unit
Storage temperature
Operating case temperature
PLRXPL-VE-SG4-38
PLRXPL-VI-SG4-38
Power supply voltage
Transmitter differential input voltage
Relative humidity
Tst
-40 to +95
˚C
Tc
Tc
Vcc
VD
RH
-20 to +85
-40 to +85
0 to +4.0
2.5
5 to 95
˚C
˚C
V
VP-P
%
2.4
Electrical characteristics
Parameter
Symbol
Min
Typical
Max
Unit
Notes 1
Supply voltage
Data rate
Transmitter
Supply current
Data input voltage swing
Data input rise/fall time
Vcc
2.97
1.0
3.3
2.125
3.63
4.25
V
Gbps
BER < 1x10-12
40
800
70
2200
80
mA
mVp-p
ps
ICCT
VTDp-p
250
40
Data input rise/fall time
40
175
ps
Data input rise/fall time
40
350
ps
Data input skew
Data input deterministic jitter
Data input deterministic jitter
Data input deterministic jitter
Data input deterministic jitter
Data input total jitter
DJ
DJ
DJ
DJ
TJ
20
0.12
0.1
0.14
0.14
0.24
ps
UI
Data input total jitter
TJ
0.25
UI
Data input total jitter
TJ
0.26
UI
Data input total jitter
TJ
0.26
UI
Transmit disable voltage level
VIH
VIL
Vcc
0.8
V
V
Transmit disable/enable assert time
TTD
TTEN
10
1
µs
ms
Transmit fault output voltage level
Transmit fault assert and
reset times
VOH
VOL
TFault
TReset
Vcc
0.5
100
V
V
µs
µs
Initialization time
TINI
300
ms
Vcc -1.0
0
Vcc -0.5
0
10
UI
UI
Differential, peak to peak
20% - 80%, differential
4 GBd operation 3
20% - 80%, differential
2 GBd operation 3
20% - 80%, differential
1 GBd operation only 3
±K28.5 pattern, δT, @ 1.062 Gbps 1, 5
±K28.5 pattern, TP1, @ 1.25 Gbps 1, 5
±K28.5 pattern, δT, @ 2.125 Gbps 1, 5
±K28.5 pattern, δT, @ 4.25 Gbps 1, 5
27-1 pattern, TP1,
BER < 1x10-12, @ 1.25 Gbps 1, 5
27-1 pattern, δT,
BER < 1x10-12, @ 1.062 Gbps 1, 5
27-1 pattern, δT,
BER < 1x10-12, @ 2.125Gbps 1, 5
27-1 pattern, δT,
BER < 1x10-12, @ 4.25 Gbps 1, 5
Laser output disabled after TTD if
input level is VIH; laser output
enabled after TTEN if input level is VIL
Laser output disabled after TTD if
input level is VIH; laser output
enabled after TTEN if input level is VIL
Transmit fault level is VOH and Laser
output disabled TFault after laser fault.
Transmitter fault is VOL and Laser
output restored TINI after transmitter
disable is asserted for TReset, then disabled.
After hot plug or Vcc ≥ 2.97V
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
9
2.4
Electrical characteristics
Parameter
Typical
Max
Unit
80
DJ
DJ
DJ
DJ
TJ
120
1300
120
40
0.46
0.36
0.39
0.39
0.75
mA
mVp-p
ps
ps
UI
UI
UI
UI
UI
Total jitter
TJ
0.61
UI
Total jitter
TJ
0.64
UI
Total jitter
TJ
0.64
UI
Loss of signal voltage level
VOH
Vcc -0.5
Vcc
V
VOL
0
0.5
V
TLOSA
100
µs
TLOSD
100
µs
Receiver
Supply current
Data output voltage swing
Data output rise/fall time
Data output skew
Data output deterministic jitter
Data output deterministic jitter
Data output deterministic jitter
Data output deterministic jitter
Total jitter
Loss of signal assert/deassert time
Symbol
(continued)
Min
ICCR
600
80
1. See Specification notes on page 11 for referenced notes.
Notes 1
RLOAD = 100 Ω, differential
20% - 80%, differential
RLOAD = 100 Ω, differential
±K28.5 pattern, TP4, @ 1.25 Gbps 1, 5
±K28.5 pattern, δR, @ 1.062 Gbps 1, 5
±K28.5 pattern, δR, @ 2.125 Gbps 1, 5
±K28.5 pattern, δR, @ 4.25 Gbps 1, 5
27-1 pattern, TP4,
BER < 1x10-12 @ 1.25 Gbps 1, 5
27-1 pattern, δR ,
BER < 1x10-12 @ 1.062 Gbps 1, 5
27-1 pattern, δR ,
BER < 1x10-12 @ 2.125 Gbps 1, 5
27-1 pattern, δR ,
BER < 1x10-12 @ 4.25 Gbps 1, 5
LOS output level VOL TLOSD after light
input > LOSD 2
LOS output level VOH TLOSA after light
input < LOSA 2
LOS output level VOL TLOSD after light
input > LOSD 2
LOS output level VOH TLOSA after light
input < LOSA 2
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
10
2.5
Optical characteristics
Parameter
Transmitter
Wavelength
RMS spectral width
Average optical power
Extinction ratio
Optical output rise/fall time
Optical modulation amplitude
Deterministic jitter
Deterministic jitter
Deterministic jitter
Deterministic jitter
Total jitter
Total jitter
Total jitter
Total jitter
Relative intensity noise
Receiver
Wavelength
Maximum input power
Sensitivity (OMA)
Stressed Sensitivity (OMA) SS1
Stressed Sensitivity (OMA) SS1
Stressed Sensitivity (OMA) SS2
Stressed Sensitivity (OMA) SS4
Loss of signal assert/deassert level
Low frequency cutoff
Symbol
Min
Typical
Max
Unit
lp
Dl
PAVG
ER
trise/fall
OMA
DJ
DJ
DJ
DJ
TJ
TJ
TJ
TJ
RIN12(OMA)
840
850
0.5
860
0.85
-2.5
nm
nm
dBm
dB
ps
µW
UI
UI
UI
UI
UI
UI
UI
UI
dB/Hz
l
Pm
S1
S2
S4
ISI = 0.96 dB
ISI = 2.18 dB
ISI = 2.2 dB
ISI = 2.6 dB
ISI = 1.26 dB
ISI = 2.03 dB
ISI = 1.67 dB
ISI = 2.14 dB
LOSD
LOSA
FC
1. See Specification notes on page 11 for referenced notes.
-9
9
-125
90
1125
0.20
0.21
0.26
0.26
0.43
0.43
0.44
0.44
-118
850
860
18
31
25
49
61
250
770
0
55
67
69
87
96
109
138
148
-17
-30
0.2
0.3
nm
dBm
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
µWp-p
dBm
dBm
MHz
Notes 1
@ in low bandwidth setting on Rate Select
20% - 80%
±K28.5 pattern, TP2, @ 1.25 Gbps
±K28.5 pattern, γT , @ 1.062 Gbps 1, 5
±K28.5 pattern, γT , @ 2.125 Gbps 1, 5
±K28.5 pattern, γT , @ 4.25 Gbps 1, 5
27-1 pattern, TP2, @ 1.25 Gbps
27-1 pattern, γT, @ 1.062 Gbps
27-1 pattern, γT, @ 2.125 Gbps 1, 5
27-1 pattern, γT, @ 4.25 Gbps 1, 5
12 dB reflection
1.06 and 1.25Gbps operation,
maximum is equivalent to -17dBm
@9dB ER
2.125 Gbps operation
4.25 Gbps operation
1.06G operation
1.06G operation
1.25Gbps operation
1.25Gbps operation
2.125G operation
2.125G operation
4.25G operation
4.25G operation
Chatter free operation
-3 dB, P<-16 dBm
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
11
2.6
Link length
Data Rate / Standard
Fiber Type
Modal Bandwidth @ 850 nm (MHz*km)
Distance Range (m)
Notes
1.0625 GBd
Fibre Channel
100-M5-SN-I
100-M6-SN-I
62.5/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
62.5/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
62.5/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
62.5/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
50/125 mm MMF
200
500
900
1500
2000
200
500
900
1500
2000
200
500
900
1500
2000
200
500
900
1500
2000
2 to 300
2 to 500
2 to 630
2 to 755
2 to 860
.5 to 275
.5 to 550
.5 to 595
.5 to 740
.5 to 860
2 to 150
2 to 300
2 to 350
2 to 430
2 to 500
2 to 70
2 to 150
2 to 175
2 to 215
2 to 270
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
1.25 Gbps
IEEE 802.3
1000Base-SX
2.125 GBd
Fibre Channel
200-M5-SN-I,
200-M6-SN-I
4.25 GBd
Fibre Channel
200-M5-SN-I,
200-M6-SN-I
Specification notes
1. UI (Unit Interval): one UI is equal to one bit time. For example, 2.125 Gbps corresponds to a UI of 470.588ps.
2. For LOSA and LOSD definitions see Loss of Signal Assert/Deassert Level in Section 2.5 Optical characteristics on page 10.
3. When operating the transceiver at 1.0 - 1.3 Gbaud only, a slower input rise and fall time is acceptable. If it is planned to operate the module in the 1.0 - 4.25 Gbaud range,
faster input rise and fall times are required.
4. Measured with stressed eye pattern as per FC-PI (Fibre Channel) using the worst case specifications.
5. All jitter measurements performed with worst case input jitter according to FC-PI.
6. Distances, shown in the “Link Length” table, are the distances specified in the Fibre Channel and Ethernet standards. “Link Length” distances are calculated for worst case fiber
and transceiver characteristics based on the optical and electrical specifications shown in this document using techniques utilized in IEEE 802.3 (Gigabit Ethernet). In the
nominal case, longer distances are achievable.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
12
2.7 Regulatory compliance
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 complies with common ESD, EMI,
Immunity, and Component recognition requirements and specification (see details in Table 3 on page 12).
The PLRXPL-VE-SG4-38/PLRXPL-VE-SG4-38 is lead-free and RoHS-compliant
per Directive 2002/95/EC of the European Parliament and of the Council of 27
January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
ESD, EMI, and Immunity are dependent on the overall system design. Information included herein is intended as a figure of merit for designers to use as a basis
for design decisions.
Table 3 Regulatory compliance
Feature
Test Method
Performance
Laser eye safety
U.S. 21CFR (J) 1040.10 & 1040.11
IEC 60825
Electrostatic discharge (ESD)
immunity at electrical pins
Electrostatic discharge (ESD)
immunity at optical connector
MIL-STD 883; Method 3015.7
EN 61000-4-2
IEC 61000-4-2: 1999
CDRH compliant and Class 1 laser safe.
Accession # 9922782
TUV Certificate # U8V051038649039
Class 1 (> 1 kV)
Electromagnetic interference (EMI)
Radiated immunity
FCC CFR 47 Part 15 Subpart J
Class B
CISPR 22: 2002
EN 55022: 1998 +A1:2000
VCCI Class I +A1:2003
IEC 61000-4-3
Lead-free and RoHS-compliant
Directive 2002/95/EC
UL
TUV
UL 60950-1:2003
EN 60950-1/A11:2004
EN 60825-//A1:2002
CAN/CSA C22:2 NO 60950-1:2003
Withstand discharges of 15 kV using a “Human Body
Model” probe
Contact: 8kV
Air: 25kV
Noise frequency range: 30 MHz to 22 GHz.
Good system EMI design practice achieve Class B margins.
Field strength of 3 V/m RMS, from 80 MHz to 1.0 GHz.
No effect on transceiver performance is detectable
between these limits.
Compliant per the Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003 on the
restriction of the use of certain hazardous substances in
electrical and electronic equipment
UL File #E209897
TUV Certificate # U8V051038649039
CB Certificate# DE3-52702M1
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
13
2.8
PCB layout
NOTES:
34.50
1. DATUM AND BASIC DIMENSIONS
ESTABLISHED BY CUSTOMER.
2X 30
A
2. PADS AND VIAS ARE CHASSIS
GROUND 11 PLACES
20
3X 10
1
B
CROSS-HATCHED AREA
DENOTES COMPONENT
AND TRACE KEEPOUT
(EXCEPT CHASSIS GROUND)
3. THRU HOLES, PLATING OPTIONAL
2X 7.20
3X 7.10
0.85±0.05 2
(MARKED "S")
0.1 A B
2X 2.50
2X 2.50
11.9 1
14.25
TYP
5. ALL DIMENSIONS ARE IN
MILLIMETERS
C
D
3.68
A
16.25
4. HOLES DENOTED WITH 'A' ARE
NOT REQUIRED WITH PICOLIGHT
CAGES (6 PLACES)
11.08
1.70
8.48
A
5.68
8.58
A
B
A
9.60
11.93
4.80
A
A
1.70
2 TYP
2
2 10X
0.1
1.05±0.05
L
A C
9X 0.95±0.05 3
(MARKED "G")
0.1 L A C
5
26.80
10
3 PLACES
THIS AREA DENOTES
COMPONENT KEEP-OUT
(TRACES ALLOWED)
41.30
42.30
Figure 4
Board layout
10X 5
10X 3.20
G
2X 0.90
G
S
G
G
10.93
10.53
9.60
G
9X 0.8
9X 0.8
G
G
G
G
2X 1.55±0.05
0.1 L C D
Figure 5
Detail layout
ALL DIMENSIONS ARE IN MILLIMETERS
20X 0.50±0.03
0.06 C D
2±0.05 TYP
0.06 L C D
11.93
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
14
2.9
Front panel opening
B
A
16.25 ±0.10
10.4±0.1
C
C
0.4±0.1
1.7 ±0.9
15.25±0.10
3.5 ±0.3
7
16.15
All dimensions are in millimeters
Figure 6
2.10
Module outline
56.5
A
13.7
A
13.7
SECTION A-A
SCALE 4 : 1
12.3
1.0
2.0 MAX
2.25
45.0
9.2
34.6
2.5
41.8
All dimensions are in millimeters
Figure 7
2.0
8.5
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
15
2.11
Transceiver belly-to-belly mounting
6X .600±.004
4X .640±.004
.135
6X .41±.00
.074
.042
All dimensions are in inches
.138
Figure 8
Section 3
Related Information
Other information related to the RoHS-Compliant 4.25 Gbps 850 nm eSFP Transceivers; Extended/Industrial Temperature and Voltage includes:
• Section 3.1
Digital Diagnostic Monitoring and Serial ID Operation below
• Section 3.2
Package and handling instructions on page 21
• Section 3.3
ESD Discharge (ESD) on page 21
• Section 3.4
Eye safety on page 21
3.1
Digital Diagnostic Monitoring and Serial ID Operation
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is equipped with a two-wire serial
EEPROM that is used to store specific information about the type/identification
of the transceiver as well as real-time digitized information relating to the transceiver’s performance. See the Small Form Factor Commitee’s document number
SFF-8472 Rev 9.5, dated June 1, 2004 for memory/address organization of the
identification and digital diagnostic data.
The enhanced digital diagnostics feature monitors five key transceiver parameters
which are Internally Calibrated and should be read as absolute values and interpreted as follows;
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
16
Transceiver Temperature in degrees Celsius: Internally measured. Represented
as a 16 bit signed two’s complement value in increments of 1/256°C from -40 to
+125°C with LSB equal to 1/256°C. Accuracy is ± 3°C over the specified operating
temperature and voltage range.
Vcc/Supply Voltage in Volts: Internally measured. Represented as a 16 bit unsigned integer with the voltage defined as the full 16-bit value (0-65535) with LSB
equal to 100 µV with a measurement range of 0 to +6.55V. Accuracy is ± 3% of
nominal value over the specified operating temperature and voltage ranges.
TX Bias Current in µA: Represented as a 16 bit unsigned integer with current defined as the full 16 bit value(0-65535) with LSB equal to 2 µA with a measurement
range of 0 - 131 mA. Accuracy is ± 0.5 mA over the specified operating temperature and voltage ranges.
TX Output Power in mW: Represented as a 16-bit unsigned integer with the power defined as the full 16-bit value (0-65535) with LSB equal to 0.1 µW. Accuracy is
± 2 dB over the specified temperature and voltage ranges over the permitted range
of 100 µW to 800 µW (-10 dBm to -1 dBm). Data is not valid when transmitter
is disabled.
RX Received Optical Power in mW: Represented as average power as a 16-bit unsigned integer with the power defined as the full 16-bit value (0-65535) with LSB
equal to 0.1 µW. Accuracy is ± 3 dB over the specified temperature and voltage
ranges over the power range of 30 µW to 1000 µW (-15 dBm to 0 dBm).
Reading the data
The information is accessed through the MOD_DEF(1), and MOD_DEF(2)
connector pins of the module. The specification for this EEPROM (ATMEL AT24CO1A family) contains all the timing and addressing information required for
accessing the data.
The device address used to read the Serial ID data is 1010000X(A0h) and the address to read the diagnostic data is 1010001X(A2h). Any other device addresses
will be ignored. Refer to Table 4, Table 5, and Table 6 for information regarding
addresses and data field descriptions
MOD_DEF(0), pin 6 on the transceiver, is connected to Logic 0 (Ground) on the
transceiver.
MOD_DEF(1), pin 5 on the transceiver, is connected to the SCL pin of the EEPROM.
MOD_DEF(2), pin 4 on the transceiver, is connected to the SDA pin of the EEPROM.
Decoding the data
The information stored in the EEPROM and the digital diagnostic information
including organization is defined in the Small Form-Factor document SFF-8472
draft rev 9.5, dated June 1, 2004.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
17
Table 4 Data Field Descriptions
0
Address(1010000X)(A0h)
Serial ID Information;
Defined by SFP MSA
95
0
55
95
JDSU-specific
Information
127
119
127
Alarm and Warning Limits
Reserved for External
Calibration Constants
Real-time Diagnostic
Information
JDSU-specific Information
Nonvolatile, customerwriteable, field-writeable area
Reserved for SFP MSA
247
255
Address(1010001X)(A2h)
255
JDSU-specific Information
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
18
Table 5 Serial ID Data and Map
Memory Address
Value
Comments
Address (1010000X)(A0h)
0
1
2
3-10
03
04
07
0000000120400C15
SFP Transceiver
SFP with Serial ID
LC Connector
850nm multimode, 100/200/400 FC, Intermediate Distance
and 1000Base-SX
8B10B encoding mechanism
Nominal Bit rate of 4Gbps
Reserved
Single mode fiber not supported
Single mode fiber not supported
150 meters of 50/125 µm fiber
70 meters of 62.5/125 µm fiber
Copper not supported
Reserved
Vendor Name (ASCII)
Reserved
IEEE Company ID (ASCII)
Part Number (ASCII)
Rev of part number (ASCII)
Wavelength of laser in nm; 850
Reserved
Check Code; Lower 8 bits of sum from byte 0 through 62
Reserved
Rate Select, Tx_Disable, Tx Fault, Loss of Signal implemented
11
12
13
14
15
16
17
18
19
20-35
36
37-39
40-55
56-59
60-61
62
63
64
65
66
67
68-83
84-91
92
01
2A
00
00
00
0F
07
00
00
JDSU
00
000485
93
F8
94
95
96-127
128-255
02
64_94
0352
00
3A
00
00
68
Serial Number (ASCII)
Date Code (ASCII)
Digital diagnostics monitoring implemented,
interally calibrated, receiver power type is average
Alarms & Warnings, TX_Fault and Rx_LOS monitoring
implemented, TX_Disable Control & Monitoring.
Soft rate selectcontrol & monitoring implemented.
SFF-8472 Rev 9.4 compliant
Check Code; Lower 8 bits of sum from byte 64 through 94
JDSU specific EEPROM
Reserved
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
19
Table 6 Diagnostics Data Map
Memory Address
Value
Comments
Address (1010001X)(A2h)
00-01
02-03
04-05
06-07
08-09
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
28-29
30-31
32-33
34-35
36-37
38-39
40-55
56-59
60-63
64-67
68-71
72-75
76-77
78-79
80-81
82-83
84-85
86-87
88-89
90-91
92-94
95
96
97
98
99
100
Temp High Alarm
Temp Low Alarm
Temp High Warning
Temp Low Warning
Voltage High Alarm
Voltage Low Alarm
Voltage High Warning
Voltage Low Warning
Bias High Alarm
Bias Low Alarm
Bias High Warning
Bias Low Warning
TX Power High Alarm
TX Power Low Alarm
TX Power High Warning
Tx Power Low Warning
RX Power High Alarm
RX Power Low Alarm
RX Power High Warning
RX Power Low Warning
Reserved
Rx_PWR(4) = 0 for internally calibrated
Rx_PWR(3) = 0 for internally calibrated
Rx_PWR(2) = 0 for internally calibrated
Rx_PWR(1) = 0 for internally calibrated
Rx_PWR(0) = 0 for internally calibrated
Tx_I(Slope) = 1 for internally calibrated
Tx_I(Offset) = 0 for internally calibrated
Tx_PWR(Slope) = 1 for internally calibrated
Tx_PWR(Offset) = 0 for internally calibrated
T(Slope) = 1 for internally calibrated
T(Offset) = 0 for internally calibrated
V(Slope) = 1 for internally calibrated
V(Offset) = 0 for internally calibrated
Reserved
Checksum
Temperature MSB
Temperature LSB
Vcc MSB
Vcc LSB
TX Bias MSB
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
MSB at low address
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
External Calibration Constant
Reserved
Bytes 0_94
Internal temperature
Internally measured supply voltage
Internally measured TX bias current
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
20
Table 6 Diagnostics Data Map
(continued)
Memory Address
Value
Address (1010001X)(A2h)
101
102
103
104
105
106
107
108
109
110
111
112-119
120-127
128-247
248-255
TX Bias LSB
TX Power MSB
TX Power LSB
RX Power MSB
RX Power LSB
Reserved MSB
Reserved LSB
Reserved MSB
Reserved LSB
Optional status/control bits
Reserved
Optional alarm & warning flag bits
Vendor specific
User/Customer EEPROM
Vendor specific
Comments
Measured TX output power
Measured RX input power
For 1st future definition of digitized analog input
For 2nd future definition of digitized analog input
Refer to SFF-8472 rev 9.5 all features implemented
Reserved
Refer to SFF-8472 rev 9.5 all features implemented
Vendor specific
Field writeable EEPROM
Vendor specific
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
21
3.2 Package and handling instructions
Process plug
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is supplied with a dust cover. This
plug protects the transceiver’s optics during standard manufacturing processes by
preventing contamination from air borne particles.
It is recommended that the dust cover remain in the transceiver whenever an optical fiber connector is not inserted.
Recommended cleaning and de-greasing chemicals
JDSU recommends the use of methyl, isopropyl and isobutyl alcohols for cleaning.
Do not use halogenated hydrocarbons (trichloroethane, ketones such as acetone,
chloroform, ethyl acetate, MEK, methylene chloride, methylene dichloride, phenol, N-methylpyrolldone).
Flammability
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 housing is made of cast zinc and
sheet metal.
3.3 ESD Discharge (ESD)
Handling
Normal ESD precautions are required during the handling of this module. This
transceiver is shipped in ESD protective packaging. It should be removed from the
packaging and handled only in an ESD protected environment utilizing standard
grounded benches, floor mats, and wrist straps.
Test and operation
In most applications, the optical connector will protrude through the system chassis and be subjected to the same ESD environment as the system. Once properly
installed in the system, this transceiver should meet and exceed common ESD
testing practices and fulfill system ESD requirements.
Typical of optical transceivers, this module’s receiver contains a highly sensitive
optical detector and amplifier which may become temporarily saturated during
an ESD strike. This could result in a short burst of bit errors. Such an event might
require that the application re-acquire synchronization at the higher layers (serializer/deserializer chip).
3.4 Eye safety
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is an international Class 1 laser
products per IEC 825, and per CDRH, 21 CFR 1040 Laser Safety Requirements.
The PLRXPL-VE-SG4-38/PLRXPL-VI-SG4-38 is an eye safe device when operated within the limits of this specification.
Operating this product in a manner inconsistent with intended usage and specification may result in hazardous radiation exposure.
ROHS-COMPLIANT 4.25 GBPS 850 NM ESFP TRANSCEIVERS;
EXTENDED/INDUSTRIAL TEMPERATURE & VOLTAGE
Caution
Tampering with this laser based product or operating this product outside the
limits of this specification may be considered an act of “manufacturing,” and will
require, under law, recertification of the modified product with the U.S. Food and
Drug Administration (21 CFR 1040).
Order Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide, or via e-mail at
[email protected].
Sample: PLRXPL-VE-SG4-38
Part Number
PLRXPL-VE-SG4-38
PLRXPL-VI-SG4-38
Temp. Range
-20 to 85˚C
-40 to 85˚C
NORTH AMERICA: 800 498-JDSU (5378)
Power Supply Tolerance
±10%
±10%
1000Base-SX Compliant
X
X
WORLDWIDE: +800 5378-JDSU
Rate Select
X
X
Digital Diagnostics
X
X
WEBSITE: www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. © 2008 JDS Uniphase Corporation 30149157 001 1108 PLRXPL-VE-SG4-38.DS.CMS.AE
November 2008