KOA SPRX1CT631R103J

1733 Reader's Spreads pg1-203:document
1/27/09
4:09 PM
Page 110
SPR
resistors
power carbon film leaded resistor
EU
features
•
•
•
•
•
Fixed metal film resistor available (specify “SPRX”)
Flameproof silicone coating equivalent to (UL94V0)
High reliability performance
Suitable for automatic machine insertion
Marking: Light green body color
Color-coded bands on 1/2W - 1W
Alpha-numeric black marking on 2W - 5W
• Products with lead-free terminations meet EU RoHS
and China RoHS requirements
dimensions and construction
L
Ceramic Body
D
l
d
Marking
End
Cap
Flame Retardant Coating
C
Lead
Wire
Dimensions inches (mm)
C (max.)
D
d nominal
Type
L
SPR1/4
SPRX1/4
.13±.012
(3.3±0.3)
.138
(3.5)
.067±.012
(1.7±0.3)
.018
(0.45)
SPR1/2
SPRX1/2
.244±.02
(6.2±0.5)
.280
(7.1)
.098±.02
(2.5±0.5)
.024
(0.6)
SPR1
SPRX1
.354±.039
(9.0±1.0)
.437
(11.1)
.138±.02
(3.5±0.5)
SPR2
SPRX2
.472±.039
(12.0±1.0)
.591
(15.0)
.165±.031
(4.2±0.8)
SPR3
SPRX3
.610±.039
(15.5±1.0)
.709
(18.0)
.236±.039
(6.0±1.0)
SPR5
SPRX5
.965±.039
(24.5±1.0)
1.10
(28.0)
.354±.039
(9.0±1.0)
l
.787 Min.
(20.0 Min.)
.945 Min.
(24.0 Min.)
.031
(0.8)
1.18±.118
(30.0±3.0)
1.50±.118
(38.0±3.0)
ordering information
New Part #
SPR
Type
SPR
SPRX
1/2
C
Power
Rating
1/4: 0.25W
1/2: 0.5W
1: 1W
2: 2W
3: 3W
5: 5W
Termination
Material
C: SnCu
T52
R
Taping and Forming
Packaging
Axial: T26, T52, T521, T631
Stand-off Axial: L52, L521, L631
Radial: VT, VTP, VTE, GT
L, U, M Forming
A: Ammo
R: Reel
103
Nominal
Resistance
±2%, ±5%:
2 significant figures
+ 1 multiplier
“R” indicates decimal
on value <10Ω
±1%: 3 significant
figures + 1 multiplier
“R” indicates decimal
on value <100Ω
J
Tolerance
F: ±1%
G: ±2%
J: ±5%
For further information
on packaging, please
refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
112
12/29/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
1733 Reader's Spreads pg1-203:document
1/27/09
4:09 PM
Page 111
PMS 300 neg.
Black neg.
power carbon film leaded resistor
applications and ratings
Part
Designation
Power
Rating
@ 70°C
Minimum
Dielectric
Withstanding
Voltage
T.C.R.
(ppm/°C)
±350
T.C.R.
(ppm/°C)
+350 to -600
SPR1/4
0.25W
300V
2.2Ω - 10KΩ
—
SPR1/2
0.5W
2.2Ω - 91KΩ
≥100KΩ
2.2Ω - 110KΩ
≥120KΩ
500V
SPR1
1W
SPR2
2W
SPR3
3W
SPR5
5W
800V
SPRX1/4
0.25W
300V
SPRX1/2
0.5W
SPRX1
1W
SPRX2
2W
SPRX3
3W
SPRX5
5W
700V
—
≥150KΩ
2.2Ω - 130KΩ
Resistance Resistance
Range
Range
E-24
E-24
(F±1%, G±2%)
(J±5%)
2.2Ω - 220KΩ
≥240KΩ
0.1Ω - 2.0Ω
—
Absolute
Maximum
Working
Voltage
Absolute
Maximum
Overload
Voltage
2.2Ω - 10KΩ
250V
500V
2.2Ω - 240KΩ
400V
800V
500V
1000V
2.2Ω - 1.0MΩ
600V
1200V
0.1Ω - 2.0Ω
E = √P x R
E x 2.5
Operating
Temperature
Range
2.2Ω - 330KΩ
10Ω - 100KΩ 2.2Ω - 510KΩ
2.2Ω - 750KΩ
500V
—
-55°C
to
+200°C
700V
800V
environmental applications
Surface Temperature Rise
250
Temperature Rise (°C)
100
% Rated Power
80
60
40
20
+4
200
SPR5
SPR3
150
SPR2
100
SPR1
SPR1/2
50
SPR1/4
0
-60 -40 -20 0 20 40 60 80 100 120 140 160 180 200 220 240
235
-55
70
Ambient Temperature
(°C)
0
Load Life @ 70°C, 1000 Hr
0
25
50
75
100
SPRX1
SPR1
+2
∆ R/R (%)
Derating Curve
0
-2
-4
0.1
12
10
% Rated Power
100
1k
10k
100k 330k
Resistance
(Ω)
Performance Characteristics
Parameter
Resistance
T.C.R.
Overload (Short time)
Resistance to Solder Heat
Terminal Strength
Rapid Change of Temperature
Requirement ∆ R ±(% + 0.05Ω)
Limit
Typical
Within specified
—
tolerance
Within specified
—
T.C.R.
±(1%+0.1Ω)
±0.5%
±1%
±0.5%
No lead-coming off
and loose terminals
—
Test Method
Measuring points are at 10mm ±1mm from the end cap.
Room temperature +100°C
Rated voltage x 2.5 or max. overload voltage for 5 seconds, whichever is lower
260°C ±5°C, 10 seconds ± 1 second
Twist 360°C, 5 times
±1%
±0.5%
Moisture Resistance
±(3%+0.1Ω):1/4W-2W
±(5%+0.1Ω):3W,5W
1.5: 1/4W-2W
2.5: 3W, 5W
40°C ± 2°C, 90 - 95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Endurance at 70°C
±(3%+0.1Ω):1/4W-2W
±(5%+0.1Ω):3W,5W
1.5: 1/4W-2W
2.5: 3W, 5W
70°C ± 2°C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
±(2% +0.1Ω)
±1%
No abnormality in
appearance. Marking
shall be easily legible
—
Ultrasonic washing with isopropyl alcohol for 2 minutes.
Power: 0.3W/cm3, f: 28kHz, Temp: 35°C ±5°C
—
Flame test: the test flame shall be applied and removed for each 15 seconds respectively
to repeat the cycle 5 times. Overload flame retardant: power (AC) corresponding to 2, 4,
8, 16 and 32 times the power rating shall be applied for each 1 minute until disconnection
occurs. However the applied voltage shall not exceed the value of 4 times of the
maximum operating voltage
High Temperature Exposure
Resistance to Solvent
Flame Retardant
No evidence of
flaming or
self-flaming
-55°C (30 minutes), +125°C (30 minutes), 5 cycles
-125°C, 100 hours
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use.
12/29/08
KOA Speer Electronics, Inc. • 199 Bolivar Drive • Bradford, PA 16701 • USA • 814-362-5536 • Fax: 814-362-8883 • www.koaspeer.com
113
resistors
SPR