FAIRCHILD NDT456P(J23Z)

December 1998
NDT456P
P-Channel Enhancement Mode Field Effect Transistor
General Description
Features
Power SOT P-Channel enhancement mode power field
effect transistors are produced using Fairchild's
proprietary, high cell density, DMOS technology. This
very high density process is especially tailored to
minimize on-state resistance and provide superior
switching performance. These devices are particularly
suited for low voltage applications such as notebook
computer power management, battery powered circuits,
and DC motor control.
-7.5 A, -30 V. RDS(ON) = 0.030 Ω @ VGS = -10 V
RDS(ON) = 0.045 Ω @ VGS = -4.5 V.
High density cell design for extremely low RDS(ON).
High power and current handling capability in a widely
used surface mount package.
______________________________________________________________________________
D
G
Absolute Maximum Ratings
Symbol
Parameter
VDSS
Drain-Source Voltage
VGSS
Gate-Source Voltage
ID
Drain Current
D
D
S
- Continuous
(Note 1a)
Maximum Power Dissipation
NDT456P
Units
-30
V
±20
V
±7.5
A
±20
(Note 1a)
3
(Note 1b)
1.3
(Note 1c)
TJ,TSTG
S
TA = 25°C unless otherwise noted
- Pulsed
PD
G
Operating and Storage Temperature Range
W
1.1
-65 to 150
°C
THERMAL CHARACTERISTICS
RθJA
Thermal Resistance, Junction-to-Ambient
(Note 1a)
42
°C/W
RθJC
Thermal Resistance, Junction-to-Case
(Note 1)
12
°C/W
© 1998 Fairchild Semiconductor Corporation
NDT456P Rev. F
Electrical Characteristics (T
Symbol
A
= 25°C unless otherwise noted)
Parameter
Conditions
Min
-30
Typ
Max
Units
OFF CHARACTERISTICS
BVDSS
Drain-Source Breakdown Voltage
VGS = 0 V, ID = 250 µA
IDSS
Zero Gate Voltage Drain Current
VDS = -24 V, VGS = 0 V
V
TJ = 55°C
-1
µA
-10
µA
IGSSF
Gate - Body Leakage, Forward
VGS = 20 V, VDS = 0 V
100
nA
IGSSR
Gate - Body Leakage, Reverse
VGS = -20 V, VDS= 0 V
-100
nA
-3
V
ON CHARACTERISTICS (Note 2)
VGS(th)
Gate Threshold Voltage
VDS = VGS, ID = - 250 µA
RDS(ON)
Static Drain-Source On-Resistance
VGS = -10 V, ID = -7.5 A
-1
TJ = 125°C
-0.5
TJ = 125°C
VGS = - 4.5 V, ID = -6 A
-1.5
-1.1
-2.6
0.026
0.03
0.035
0.054
0.041
0.045
Ω
ID(on)
On-State Drain Current
VGS = -10 V , VDS = - 5 V
-20
A
VGS = -4.5 V, VDS = - 5 V
-10
Gfs
Forward Transconductance
VGS = -10 V, ID = -7.5 A
13
S
VDS = -15 V, VGS = 0 V,
f = 1.0 MHz
1440
pF
905
pF
355
pF
DYNAMIC CHARACTERISTICS
Ciss
Input Capacitance
Coss
Output Capacitance
Crss
Reverse Transfer Capacitance
SWITCHING CHARACTERISTICS (Note 2)
tD(on)
Turn - On Delay Time
tr
Turn - On Rise Time
tD(off)
Turn - Off Delay Time
tf
Turn - Off Fall Time
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
VDD = -15 V, ID = -7 A,
VGEN = -10 V, RGEN = 12 Ω
VDS = -10 V,
ID = -7.5 A, VGS = -10 V
10
20
ns
65
120
ns
70
130
ns
70
130
ns
47
67
nC
5
nC
12
nC
NDT456P Rev. F
Electrical Characteristics (T
Symbol
A
= 25°C unless otherwise noted)
Parameter
Conditions
Min
Typ
Max
Units
-2.5
A
-1.2
V
140
ns
DRAIN-SOURCE DIODE CHARACTERISTICS AND MAXIMUM RATINGS
IS
Maximum Continuous Drain-Source Diode Forward Current
VSD
Drain-Source Diode Forward Voltage
VGS = 0 V, IS = - 2.5 A
trr
Reverse Recovery Time
VGS = 0 V, IF = - 2.5 A dIF/dt = 100 A/µs
Notes:
1. P D (t)
=
T J −T A
R θJA (t)
=
T J −T A
R θJC +R θCA (t)
= I 2D (t) × R DS(ON)@T J
- 0.85
(Note 2)
RθJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the
solder mounting surface of the drain pins. RθJC is guaranteed by design while RθCA is defined by users. For general reference: Applications on 4.5"x5" FR-4 PCB under still air environment,
typical RθJA is found to be:
a. 42oC when mounted on a 1 in2 pad of 2oz copper.
b. 95oC when mounted on a 0.066in2 pad of 2oz copper.
c. 110oC/W when mounted on a 0.00123in2 pad of 2oz copper.
1a
1b
1c
Scale 1 : 1 on letter size paper
2. Pulse Test: Pulse Width < 300µs, Duty Cycle < 2.0%.
NDT456P Rev. F
Typical Electrical Characteristics
-6.0
-5.0
-3.5
R DS(on) , NORMALIZED
-16
2.5
-4.5
-4.0
VGS = -10V
-12
-3.0
-8
-4
-2.5
DRAIN-SOURCE ON-RESISTANCE
I D , DRAIN-SOURCE CURRENT (A)
-20
0
0
-1
V
DS
-2
V GS=-3.5V
2
-4.0
-4.5
1.5
-7.0
0.5
-3
0
-4
-8
, DRAIN-SOURCE VOLTAGE (V)
-20
V
R DS(on) , NORMALIZED
1 .2 5
= -10V
GS
1
0 .7 5
DRAIN-SOURCE ON-RESISTANCE
2.5
0 .5
-50
VGS = -10V
2
25°C
1
-55°C
0.5
0
-25
0
25
50
75
100
T , JUNCTION TEMPERATURE (°C)
125
TJ = 125°C
1.5
150
0
-4
-8
-12
-16
-20
I D , DRAIN CURRENT (A)
J
Figure 4. On-Resistance Variation with Drain
Current and Temperature.
Figure 3. On-Resistance Variation with
Temperature.
T = -55°C
25
J
VDS =- 10V
125
V GS(th) , NORMALIZED
-16
-12
D
-8
-4
0
-0.8
-1.6
V
GS
-2.4
-3.2
, GATE TO SOURCE VOLTAGE (V)
Figure 5. Transfer Characteristics.
-4
GATE-SOURCE THRESHOLD VOLTAGE
1.2
-20
, DRAIN CURRENT (A)
-16
Figure 2. On-Resistance Variation with Gate
Voltage and Drain Current.
I D =-7.5A
I
-12
I D , DRAIN CURRENT (A)
1 .5
R DS(ON), NORMALIZED
-10
1
Figure 1. On-Region Characteristics.
DRAIN-SOURCE ON-RESISTANCE
-5.0
VDS = VGS
I D =- 250µA
1.1
1
0.9
0.8
0.7
0.6
-50
-25
0
25
50
75
100
T , JUNCTION TEM PERATURE (°C)
125
150
J
Figure 6. Gate Threshold Variation with
Temperature.
NDT456P Rev. F
Typical Electrical Characteristics
20
-IS , REVERSE DRAIN CURRENT (A)
BV DSS , NORMALIZED
DRAIN-SOURCE BREAKDOWN VOLTAGE
1 .1
I D =- 250µA
1 .0 8
1 .0 6
1 .0 4
1 .0 2
1
0 .9 8
0 .9 6
0 .9 4
-5 0
-2 5
0
T
J
25
50
75
100
, JU N CTION T EM PERA T U RE (°C)
125
150
V GS = 0V
5
-55°C
0.01
0.001
0.0001
0
0.2
-V
SD
0.4
10
-VGS , GATE-SOURCE VOLTAGE (V)
3000
2000
Ciss
Coss
1000
Crss
300
f = 1 MHz
VGS = 0V
200
0.1
0.2
0.5
1
2
5
10
20
30
8
R GEN
6
4
2
0
0
10
20
30
40
50
60
Figure 10. Gate Charge Characteristics.
t on
t d(on)
RL
t off
tr
t d(off)
tf
90%
90%
V OUT
VOUT
DUT
G
1.2
-20V
-VDD
D
1
Q g , GATE CHARGE (nC)
Figure 9. Capacitance Characteristics.
V IN
0.8
VDS =- 5V
-10V
I D = -7.5A
VDS , DRAIN TO SOURCE VOLTAGE (V)
VGS
0.6
, BODY DIODE FORWARD VOLTAGE (V)
Figure 8. Body Diode Forward Voltage Variation
with Current and Temperature.
4000
CAPACITANCE (pF)
25°C
0.1
Figure 7. Breakdown Voltage Variation with
Temperature.
500
400
TJ = 125°C
1
10%
10%
90%
S
V IN
50%
50%
10%
PULSE W IDTH
Figure 11. Switching Test Circuit.
INVERTED
Figure 12. Switching Waveforms.
NDT456P Rev. F
3 .5
18
STEADY-STATE POWER DISSIPATION (W)
VDS = -5V
TJ = -55°C
15
25°C
12
125°C
9
6
3
g
FS
, TRANSCONDUCTANCE (SIEMENS)
Typical Thermal Characteristics
0
0
-2
-4
-6
-8
1a
3
2 .5
2
1 .5
1b
1c
1
4.5"x5" FR-4 Board
o
TA = 25 C
Still Air
0 .5
0
-10
0 .2
0 .4
0 .6
0 .8
2 o z COPPER M O U N T ING PAD AREA (in 2 )
1
Figure 13. Transconductance Variation with Drain
Current and Temperature.
Figure 14. SOT-223 Maximum Steady-State Power
Dissipation versus Copper Mounting Pad
Area.
10
40
20
8
1a
6
1b
1c
4
4.5"x5" FR-4 Board
o
TA = 25 C
Still Air
VGS = -10V
2
0
0
0.2
0.4
0.6
0.8
-ID , DRAIN CURRENT (A)
-ID , STEADY-STATE DRAIN CURRENT (A)
I D, DRAIN CURRENT (A)
10
R
N)
LIM
IT
10m
s
100
ms
1s
10s
DC
1
0.3
0.1
VGS = -10V
SINGLE PULSE
RθJA = See Note 1c
TA = 25°C
0.01
0.1
0.2
0.5
2oz COPPER MOUNTING PAD AREA (in2 )
Figure 15. Maximum Steady-State Drain
Current versus Copper Mounting Pad
Area.
100
us
1m
s
3
0.03
1
(O
DS
1
2
5
10
30
50
- VDS , DRAIN-SOURCE VOLTAGE (V)
Figure 16. Maximum Safe Operating Area.
r(t), NORMALIZED EFFECTIVE
TRANSIENT THERMAL RESISTANCE
1
0 .5
D = 0.5
0 .2
0 .2
0 .1
0 .1
0 .05
0 .0 5
0 .02
0 .0 2
0 .01
R
(t) = r(t) * R JA
θJA
θ
R JA = See Note 1 c
θ
P(p k)
0 .0 1
t1
0 .0 0 5
Single Pulse
0 .0 0 2
0 .0 0 1
0 .0 0 0 1
t2
TJ - TA = P * R JA (t)
θ
Duty Cycle, D = t 1 / t 2
0 .0 0 1
0 .01
0 .1
t 1 , TIM E (sec)
1
10
100
300
Figure 17. Transient Thermal Response Curve.
Note: Thermal characterization performed using the conditions described in note 1c. Transient thermal
response will change depending on the circuit board design.
NDT456P Rev. F
SOT-223 Tape and Reel Data and Package Dimensions
SOT-223 Packaging
Configuration: Figure 1.0
Customized Label
Packaging Description:
F63TNR Label
Antistatic Cover Tape
SOT-223 parts are shipped in tape. The carrier tape is
made from a dissipative (carbon filled) polycarbonate
resin. The cover tape is a multilayer film (Heat Activated
Adhesive in nature) primarily composed of polyester film,
adhesive layer, sealant, and anti-static sprayed agent.
These reeled parts in standard option are shipped with
2,500 units per 13" or 330cm diameter reel. The reels are
dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 500 units per 7" or
177cm diameter reel. This and some other options are
further described in the Packaging Information table.
These full reels are individually barcode labeled and
placed inside a standard intermediate box (illustrated in
figure 1.0) made of recyclable corrugated brown paper.
One box contains two reels maximum. And these boxes
are placed inside a barcode labeled shipping box which
comes in different sizes depending on the number of parts
shipped.
Static Dissipative
Embossed Carrier Tape
F852
014
F852
014
F852
014
F852
014
SOT-223 Packaging Information
Packaging Option
Packaging type
Qty per Reel/Tube/Bag
Reel Size
Box Dimension (mm)
Standard
(no flow code)
TNR
2,500
D84Z
SOT-223 Unit Orientation
TNR
500
13" Dia
7" Dia
343x64x343
184x187x47
Max qty per Box
5,000
1,000
Weight per unit (gm)
0.1246
0.1246
Weight per Reel (kg)
0.7250
0.1532
343mm x 342mm x 64mm
Intermediate box for Standard
F63TNR Label
Note/Comments
F63TNR Label
F63TNR Label sample
184mm x 184mm x 47mm
Pizza Box for D84Z Option
SOT-223 Tape Leader and Trailer
Configuration: Figure 2.0
LOT: CBVK741B019
QTY: 3000
FSID: PN2222A
SPEC:
D/C1: D9842
D/C2:
QTY1:
QTY2:
SPEC REV:
CPN:
N/F: F
(F63TNR)3
Carrier Tape
Cover Tape
Components
Trailer Tape
300mm minimum or
38 empty pockets
Leader Tape
500mm minimum or
62 empty pockets
September 1999, Rev. B
SOT-223 Tape and Reel Data and Package Dimensions, continued
SOT-223 Embossed Carrier Tape
Configuration: Figure 3.0
P0
D0
T
E1
F
K0
Wc
W
E2
B0
Tc
A0
D1
P1
User Direction of Feed
Dimensions are in millimeter
Pkg type
SOT-223
(12mm)
A0
6.83
+/-0.10
B0
7.42
+/-0.10
W
12.0
+/-0.3
D0
D1
1.55
+/-0.05
1.50
+/-0.10
E1
E2
1.75
+/-0.10
F
10.25
min
P1
5.50
+/-0.05
P0
8.0
+/-0.1
4.0
+/-0.1
K0
1.88
+/-0.10
Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481
rotational and lateral movement requirements (see sketches A, B, and C).
T
Wc
0.292
+/0.0130
9.5
+/-0.025
0.06
+/-0.02
0.5mm
maximum
20 deg maximum
Typical
component
cavity
center line
B0
Tc
0.5mm
maximum
20 deg maximum component rotation
Typical
component
center line
Sketch A (Side or Front Sectional View)
A0
Component Rotation
Sketch C (Top View)
Component lateral movement
Sketch B (Top View)
SOT-223 Reel Configuration: Figure 4.0
Component Rotation
W1 Measured at Hub
Dim A
Max
Dim A
max
See detail AA
Dim N
7" Diameter Option
B Min
Dim C
See detail AA
W3
13" Diameter Option
Dim D
min
W2 max Measured at Hub
DETAIL AA
Dimensions are in inches and millimeters
Tape Size
Reel
Option
Dim A
Dim B
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
5.906
150
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
0.059
1.5
512 +0.020/-0.008
13 +0.5/-0.2
0.795
20.2
7.00
178
0.488 +0.078/-0.000
12.4 +2/0
0.724
18.4
0.469 – 0.606
11.9 – 15.4
12mm
7" Dia
7.00
177.8
12mm
13" Dia
13.00
330
Dim C
Dim D
Dim N
Dim W1
Dim W2
Dim W3 (LSL-USL)
July 1999, Rev. B
SOT-223 Tape and Reel Data and Package Dimensions, continued
SOT-223 (FS PKG Code 47)
1:1
Scale 1:1 on letter size paper
Part Weight per unit (gram): 0.1246
September 1999, Rev. C
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QFET™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.