T-1 3/4 (5 mm) SOLID STATE LAMPS HIGH EFF. RED HIGH EFF. RED HLMP-3300 HLMP-3301 PACKAGE DIMENSIONS HIGH EFF. RED HIGH EFF. RED STANDARD RED HLMP-3315 HLMP-3316 FLV110 FEATURES • Popular, general purpose lamps • Wide and narrow viewing angle devices for direct view or backlighting 0.200 (5.08) 0.180 (4.57) • Solid state reliability CL 0.040 (1.02) • Sturdy leads for easy assembly SEE NOTES DESCRIPTION 1.00 (25.4) MIN The HLMP-33XX series consists of high efficiency red T-1 3/4 lamps with a viewing angle of 35° or 65°. FLV110 is a low profile standard red T-1 3/4 lamp with a diffused lens, providing a viewing angle of 70°. NOTES: 1. ALL DIMENSIONS ARE IN INCHES (mm). 0.050 (1.27) 0.100 (2.54) Ø 0.230 (5.84) 0.050 (1.27) REF. 0.100 (2.54) REF. 0.023 (0.58) 0.017 (0.43) SQ. TYP. (2X) ABSOLUTE MAXIMUM RATING FLAT DENOTES CATHODE 2. TOLERANCES ARE ±.010” INCH UNLESS SPECIFIED. 3. AN EPOXY MENISCUS MAY EXTEND ABOUT .040” (1 mm) DOWN THE LEADS. 4. DIMENSIONS X. PACKAGE HEIGHT HLMP = .330 (8.38)/.350 (8.89) FLV = .275 (6.98)/.295 (7.49) 5. FLV FLANGE HEIGHT = 0.040 (1.02) 0.060 (1.53) (TA =25°C) Parameter HLMP33XX FLV110 UNITS Power Dissipation 135 135 mW Average Forward Current 30 30 mA 90 90 mA 5 5 V Peak Forward Current (1 µS pulsewidth, 0.3% duty cycle)(FLV110 1 amp) Reverse Voltage Lead Soldering Time at 260° C 5 5 sec Operating Temperature -55 to +100 -55 to +100 °C Storage Temperature -55 to +100 -55 to +100 °C 2001 Fairchild Semiconductor Corporation DS300005 2/27/01 1 OF 4 www.fairchildsemi.com T-1 3/4 (5 mm) SOLID STATE LAMPS ELECTRICAL / OPTICAL CHARACTERISTICS Part Number HLMP-3300 (TA =25°C) HLMP-3301 HLMP-3315 HLMP-3316 FLV110 Luminous Intensity (mcd) IF = 10mA Minimum 2.0 4.0 12 20 0.8* Typical 3.5 7.0 18 35 3.0* 3.0 3.0 3.0 3.0 2.0 Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Condition IF = 10mA 2.2 2.2 2.2 2.2 1.6 635 635 635 635 660 IF = 10mA Reverse Voltage (V) 5 5 5 5 5 IR = 100µA Viewing Angle (°) 65 65 35 35 70 IF = 10mA * For FLV110 Test IF = 20mA www.fairchildsemi.com 2 OF 4 2/27/01 DS300005 T-1 3/4 (5 mm) SOLID STATE LAMPS TYPICAL PERFORMANCE CURVES (TA =25°C) 2.5 90 IF - FORWARD CURRENT (mA) 80 RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) AlGaAs RED 70 HER 60 50 40 30 20 10 2.0 1.5 HER 1.0 AlGaAs RED 0.5 0.0 0 1.0 2.0 3.0 4.0 5.0 0 5 20 25 30 50 IF - FORWARD CURRENT (mA) 1.0 AlGaAs RED RELATIVE INTENSITY 15 Fig. 2 Relative Luminous Intensity vs. DC Forward Current Fig. 1 Forward Current vs. Forward Voltage 0.5 HER 0 40 HER, AlGaAs RED 30 20 10 0 500 550 600 650 700 750 20 40 60 85 100 Fig. 4 Current Derating Curve Fig. 3 Relative Intensity vs. Peak Wavelength 2/27/01 0 TA - AMBIENT TEMPERATURE (˚C) WAVELENGTH (nm) DS300005 10 IF - DC FORWARD CURRENT (mA) VF - FORWARD VOLTAGE (V) 3 OF 4 www.fairchildsemi.com T-1 3/4 (5 mm) SOLID STATE LAMPS DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body,or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 4 OF 4 2/27/01 DS300005