TI TS5A3159ADCKR

TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
FEATURES
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Isolation in Power-Down Mode, V+ = 0
Pin Compatible With TS5A3159
Specified Break-Before-Make Switching
Low On-State Resistance (1 Ω)
Control Inputs Are 5.5-V Tolerant
Low Charge Injection
Excellent On-State Resistance Matching
Low Total Harmonic Distortion (THD)
1.65-V to 5.5-V Single-Supply Operation
Latch-Up Performance Exceeds 100 mA
Per JESD 78, Class II
ESD Performance Tested Per JESD
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
Cell Phones
PDAs
Portable Instrumentation
Audio and Video Signal Routing
Low-Voltage Data Acquisition Systems
Communication Circuits
Modems
Hard Drives
Computer Peripherals
Wireless Terminals and Peripherals
DESCRIPTION
The TS5A3159A is a single-pole double-throw (SPDT) analog switch that is designed to operate from 1.65 V to
5.5 V. The device offers low on-state resistance and excellent on-state resistance matching with the
break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to
another. The device has an excellent total harmonic distortion (THD) performance and consumes very low
power. These features make this device suitable for portable audio applications.
DBV OR DCK PACKAGE
(TOP VIEW)
NO
1
6
YZP PACKAGE
(BOTTOM VIEW)
NC
C1
3 4
C2
COM
GND
B1
2 5
B2
V+
NO
A1
1 6
A2
IN
IN
GND
2
5
V+
NC
3
4
COM
NO – Normally open
NC – Normally closed
FUNCTION TABLE
IN
NC TO COM,
COM TO NC
NO TO COM,
COM TO NO
L
ON
OFF
H
OFF
ON
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2007, Texas Instruments Incorporated
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
SUMMARY OF CHARACTERISTICS (1)
2:1 Multiplexer/
Demultiplexer
(1 × SPDT)
Configuration
Number of channels
1
1.1 Ω
On-state resistance (ron)
On-state resistance match (∆ron)
0.1 Ω
On-state resistance flatness (ron(flat))
0.15 Ω
Turn-on/turn-off time (tON/tOFF)
20 ns/15 ns
Break-before-make time (tBBM)
Charge injection (QC)
Bandwidth (BW)
12 ns
–20 pC
100 MHz
OFF isolation (OISO)
–65 dB at 1 MHz
Crosstalk (XTALK)
–66 dB at 1 MHz
Total harmonic distortion (THD)
0.01%
Leakage current (INO(OFF)/INC(OFF))
±20 nA
0.1 µA
Power-supply current (I+)
Package options
(1)
6-pin DBV, DCK, or YZP
V+ = 5 V, TA = 25°C
ORDERING INFORMATION
TA
–40°C to 85°C
(1)
(2)
2
PACKAGE (1)
TOP-SIDE MARKING (2)
ORDERABLE PART NUMBER
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZP
(Pb-free)
Reel of 3000
TS5A3159AYZPR
_ _ _JJ_
SOT (SOT-23) – DBV
Reel of 3000
TS5A3159ADBVR
JAJ_
SOT (SC-70) – DCK (2)
Reel of 3000
TS5A3159ADCKR
JJ_
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
Submit Documentation Feedback
www.ti.com
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Absolute Minimum and Maximum Ratings
(1) (2)
over operating free-air temperature range (unless otherwise noted)
V+
MIN
MAX
Supply voltage range (3)
–0.5
6.5
UNIT
V
Analog voltage range (3) (4) (5)
–0.5
V+ + 0.5
V
VNO,
VNC
VCOM
IK
Analog port diode current
INO,
On-state switch current
INC,
ICOM
On-state peak switch current (6)
VI
Digital input voltage range (3) (4)
IIK
Digital input clamp current
I+
Continuous current through V+
IGND
Continuous current through GND
θJA
Package thermal impedance (7)
Tstg
(1)
(2)
(3)
(4)
(5)
(6)
(7)
VNC, VNO, VCOM < 0
VNO, VNC, VCOM = 0 to V+
VI < 0
–50
mA
–200
200
–400
400
–0.5
6.5
–50
–100
100
mA
100
mA
165
DCK package
259
YZP package
123
–65
V
mA
DBV package
Storage temperature range
mA
150
°C/W
°C
Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
All voltages are with respect to ground, unless otherwise specified.
The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
This value is limited to 5.5 V maximum.
Pulse at 1-ms duration <10% duty cycle
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
3
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 5-V Supply (1)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak on
resistance
rpeak
On-state
resistance
ron
On-state
resistance
match
between
channels
On-state
resistance
flatness
NC, NO
off leakage
current
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch on,
See Figure 15
25°C
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch on,
See Figure 15
25°C
Full
Full
0.8
4.5 V
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF),
INO(PWROFF)
NC, NO
on leakage
current
INC(ON),
INO(ON)
COM
off leakage
current
ICOM(PWROFF)
COM
on leakage
current
ICOM(ON)
VNO or VNC = 2.5 V,
ICOM = –100 mA,
Switch on,
See Figure 15
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch on,
See Figure 15
VNO or VNC = 1 V, 1.5 V, 2.5 V,
ICOM = –100 mA,
Switch on,
See Figure 15
25°C
VNC or VNO = 1 V, VCOM = 1 V to 4.5 V,
Switch off,
or
See Figure 16
VNC or VNO = 4.5 V, VCOM = 1 V to 4.5 V,
25°C
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch off,
See Figure 16
25°C
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 4.5 V, VCOM = Open,
Switch on,
See Figure 17
VNC or VNO = 0 to 5.5 V,
VCOM = 5.5 V to 0,
Switch off,
See Figure 16
VNC or VNO = Open, VCOM = 1 V,
or
VNC or VNO = Open, VCOM = 4.5 V,
Switch on,
See Figure 17
Full
0.7
4.5 V
0.05
4.5 V
0.1
–20
5.5 V
0V
–1
0.25
Ω
Ω
0.2
1
20
2
–100
0.1
1
20
2
nA
µA
20
100
–20
–20
5.5 V
20
100
–20
–1
0V
2
–100
–20
5.5 V
25°C
Full
Ω
0.25
25°
Full
Ω
0.15
4.5 V
25°C
Full
V
0.1
0.1
Full
Full
0.9
1.1
25°C
Full
1.1
1.5
25°C
∆ron
V+
nA
µA
20
–100
100
nA
Digital Input (IN)
Input logic high
VIH
Full
2.4
5.5
Input logic low
VIL
Full
0
0.8
Input leakage
current
IIH, IIL
–2
2
100
100
(1)
4
25°C
VI = 5.5 V or 0
Full
5.5 V
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
V
nA
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 5-V Supply
(1)
(Continued)
V+ = 4.5 V to 5.5 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
25°C
5V
1
Full
4.5 V to
5.5 V
1
25°C
5V
1
Full
4.5 V to
5.5 V
1
TYP MAX
UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 20
Charge injection
QC
VGEN = 0,
RGEN = 0,
12
30
35
5
ns
20
30
ns
25°C
5V
Full
4.5 V to
5.5 V
6
CL = 1 nF,
See Figure 24
25°C
5V
–20
pC
1
20
ns
NC, NO
off
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch off,
See Figure 18
25°C
5V
18
pF
NC, NO
on capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch on,
See Figure 18
25°C
5V
55
pF
COM
on capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch on,
See Figure 18
25°C
5V
55
pF
VI = V+ or GND,
See Figure 18
25°C
5V
2
pF
Digital input
capacitance
CI
Bandwidth
BW
RL = 50 Ω,
Switch on,
See Figure 21
25°C
5V
100
MHz
Off isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch off,
See Figure 22
25°C
5V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch on,
See Figure 23
25°C
5V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 200 Hz to 20 kHz,
See Figure 25
25°C
5V
0.004
%
VI = V+ or GND,
Switch on or off
Supply
Positive supply
current
(1)
I+
25°C
Full
5.5 V
10
50
500
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
5
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 3.3-V Supply (1)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak on
resistance
rpeak
On-state
resistance
ron
On-state
resistance
match
between
channels
On-state
resistance
flatness
NC, NO
off leakage
current
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch on,
See Figure 15
25°C
VNO or VNC = 2 V,
ICOM = –100 mA,
Switch on,
See Figure 15
25°C
Full
Full
V+
1.3
3V
2
1.2
3V
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF),
INO(PWROFF)
NC, NO
on leakage
current
INC(ON),
INO(ON)
COM
off leakage
current
ICOM(PWROFF)
COM
on leakage
current
ICOM(ON)
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch on,
See Figure 15
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –100 mA,
Switch on,
See Figure 15
VNO or VNC = 2 V, 0.8 V,
ICOM = –100 mA,
Switch on,
See Figure 15
VNC or VNO = 1 V, VCOM = 1 V to 3 V,
or
VNC or VNO = 3 V, VCOM = 1 V to 3 V,
Switch off,
See Figure 16
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0,
Switch off,
See Figure 16
VNC or VNO = 1 V, VCOM = Open,
or
VNC or VNO = 3 V, VCOM = Open,
Switch on,
See Figure 17
VNC or VNO = 3.6 V to 0,
VCOM = 0 to 3.6 V,
Switch off,
See Figure 16
VNC or VNO = Open, VCOM = 1 V,
or
VNC or VNO = Open, VCOM = 3 V,
Switch on,
See Figure 17
Full
0.1
3V
Full
0.15
–20
3.6 V
0V
25°C
Full
25°C
Full
–1
0.3
Ω
0.2
1
15
2
–20
0.2
1
15
2
nA
µA
10
20
–15
–10
3.6 V
20
50
–15
–1
0V
2
–50
–10
3.6 V
25°
Full
Ω
0.3
25°C
25°C
Ω
0.2
3V
Full
Full
Ω
0.15
0.15
25°C
25°C
1.5
1.7
25°C
∆ron
1.6
V
nA
µA
10
–20
20
nA
Digital Input (IN)
Input logic high
VIH
Full
2.4
5.5
Input logic low
VIL
Full
0
0.8
Input leakage
current
IIH, IIL
–2
2
–100
100
(1)
6
25°C
VI = 5.5 V or 0
Full
3.6 V
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
V
nA
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 3.3-V Supply
(1)
(Continued)
V+ = 3 V to 3.6 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNI
T
Dynamic
25°C
3.3 V
5
Full
3 V to
3.6 V
3
25°C
3.3 V
1
Full
3 V to
3.6 V
1
25°C
3.3 V
Full
3 V to
3.6 V
CL = 1 nF,
See Figure 24
25°C
3.3 V
–11
pC
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 20
Charge injection
QC
VGEN = 0,
RGEN = 0,
16
35
50
9
ns
20
30
ns
9
1
40
ns
NC, NO
off
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch off,
See Figure 18
25°C
3.3 V
18
pF
NC, NO
on capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch on,
See Figure 18
25°C
3.3 V
55
pF
COM
on capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch on,
See Figure 18
25°C
3.3 V
55
pF
VI = V+ or GND,
See Figure 18
25°C
3.3 V
2
pF
Digital input
capacitance
CI
Bandwidth
BW
RL = 50 Ω,
Switch on,
See Figure 21
25°C
3.3 V
100
MHz
Off isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch off,
See Figure 22
25°C
3.3 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch on,
See Figure 23
25°C
3.3 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
25°C
See Figure 25
3.3 V
0.01
%
VI = V+ or GND,
Switch on or off
Supply
Positive supply
current
(1)
I+
25°C
Full
3.6 V
10
25
100
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
7
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 2.5-V Supply (1)
V+ = 2.3 V to 2.7, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak on
resistance
rpeak
On-state
resistance
ron
On-state
resistance
match
between
channels
On-state
resistance
flatness
NC, NO
off leakage
current
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch on,
See Figure 15
25°C
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch on,
See Figure 15
25°C
Full
Full
1.8
2.3 V
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF),
INO(PWROFF)
NC, NO
on leakage
current
INC(ON),
INO(ON)
COM
off leakage
current
ICOM(PWROFF)
COM
on leakage
current
ICOM(ON)
VNO or VNC = 1.8 V,
ICOM = –8 mA,
Switch on,
See Figure 15
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch on,
See Figure 15
VNO or VNC = 0.8 V, 1.8 V,
ICOM = –8 mA,
Switch on,
See Figure 15
VNC or VNO = 0.5 V, VCOM = 0.5 V to 2.3
V,
or
VNC or VNO = 2.3 V, VCOM = 0.5 V to 2.3
V,
Switch off,
See Figure 16
VNC or VNO = 0 to 3.6 V,
VCOM = 3.6 V to 0,
Switch off,
See Figure 16
VNC or VNO = 0.5 V, VCOM = Open,
or
VNC or VNO = 2.2 V, VCOM = Open,
Switch on,
See Figure 17
VNC or VNO = 2.7 V to 0,
VCOM = 0 to 2.7 V,
Switch off,
See Figure 16
VNC or VNO = Open, VCOM = 0.5 V,
or
VNC or VNO = Open, VCOM = 2.2 V,
Switch on,
See Figure 17
Full
1.5
2.3 V
0.15
2.3 V
Full
0.6
–20
2.7 V
0V
25°C
Full
1
Ω
Ω
–1
0.1
1
10
2
–20
0.1
10
20
2
nA
µA
10
20
–10
–10
2.7 V
20
50
–10
–1
0V
2
–50
–10
2.7 V
25°
Full
Ω
1
25°C
Full
Ω
0.6
2.3 V
25°C
25°C
V
0.2
0.2
Full
Full
2
2.4
25°C
25°C
2.5
2.7
25°C
∆ron
V+
nA
µA
10
–20
20
nA
Digital Input (IN)
Input logic high
VIH
Full
1.8
5.5
Input logic low
VIL
Full
0
0.6
Input leakage
current
IIH, IIL
(1)
8
25°C
VI = 5.5 V or 0
Full
2.7 V
–2
2
20
20
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
V
nA
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 2.5-V Supply
(1)
(Continued)
V+ = 2.3 V to 2.7, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX
UNI
T
Dynamic
25°C
2.5 V
5
Full
2.3 V to
2.7 V
5
25°C
2.5 V
2
Full
2.3 V to
2.7 V
2
25°C
2.5 V
2
Full
2.3 V to
2.7 V
2
CL = 1 nF,
See Figure 24
25°C
2.5 V
–7
pC
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 20
Charge injection
QC
VGEN = 0,
RGEN = 0,
22
40
50
6
35
50
13
ns
ns
35
45
ns
NC, NO
off
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch off,
See Figure 18
25°C
2.5 V
18
pF
NC, NO
on capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch on,
See Figure 18
25°C
2.5 V
55
pF
COM
on capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch on,
See Figure 18
25°C
2.5 V
55
pF
VI = V+ or GND,
See Figure 18
25°C
2.5 V
2
pF
Digital input
capacitance
CI
Bandwidth
BW
RL = 50 Ω,
Switch on,
See Figure 21
25°C
2.5 V
100
MHz
Off isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch off,
See Figure 22
25°C
2.5 V
–64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch on,
See Figure 23
25°C
2.5 V
–64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
25°C
See Figure 25
2.5 V
0.02
%
VI = V+ or GND,
Switch on or off
Supply
Positive supply
current
(1)
I+
25°C
Full
2.7 V
10
20
50
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
9
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
3
Threshold Voltage – V
2.5
2
Vt+
1.5
Vt1
0.5
0
2.3
2.7
3
3.6
4.5
Power Supply – V
Figure 1. Logic Threshold vs Power Supply
10
Submit Documentation Feedback
5.5
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 1.8-V Supply
(1)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
TYP MAX UNIT
Analog Switch
Analog signal
range
VCOM, VNO,
VNC
Peak on
resistance
rpeak
On-state
resistance
ron
On-state
resistance
match
between
channels
On-state
resistance
flatness
NC, NO
off leakage
current
0
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –2 mA,
Switch on,
See Figure 15
25°C
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch on,
See Figure 15
25°C
Full
Full
5
1.65 V
15
2
1.65 V
ron(flat)
INC(OFF),
INO(OFF)
INC(PWROFF)
INO(PWROFF)
NC, NO
on leakage
current
INC(ON),
INO(ON)
COM
off leakage
current
ICOM(PWROFF)
COM
on leakage
current
ICOM(ON)
VNO or VNC = 1.5 V,
ICOM = –2 mA,
Switch on,
See Figure 15
0 ≤ (VNO or VNC) ≤ V+,
ICOM = –8 mA,
Switch on,
See Figure 15
VNO or VNC = 0.6 V, 1.5 V,
ICOM = –2 mA,
Switch on,
See Figure 15
VNC or VNO = 0.3 V,
VCOM = 0.3 V to 1.65 V,
or
VNC or VNO = 1.65 V,
VCOM = 0.3 V to 1.65 V,
Switch off,
See Figure 16
VNC or VNO = 0 to 1.95 V,
VCOM = 1.95 V to 0,
Switch off,
See Figure 16
VNC or VNO = 0.3 V, VCOM = Open,
or
VNC or VNO = 1.65 V, VCOM = Open,
Switch on,
See Figure 17
VNC or VNO = 1.95 V to 0,
VCOM = 0 to 1.95 V,
Switch off,
See Figure 16
VNC or VNO = Open, VCOM = 0.3 V,
or
VNC or VNO = Open, VCOM = 1.65 V,
Switch on,
See Figure 17
Full
0.15
1.65 V
V
Ω
Ω
0.4
0.4
25°C
25°C
2.5
3.5
25°C
∆ron
V+
Ω
5
1.65 V
Ω
4.5
Full
25°C
Full
25°C
Full
–5
1.95 V
0V
25°C
Full
25°
Full
–1
0.1
1
5
2
–20
0.1
7
5
2
nA
µA
5
20
–5
–5
1.95 V
5
20
–5
–1
0V
25°C
Full
–20
–5
1.95 V
2
nA
µA
5
–20
20
nA
Digital Input (IN)
Input logic high
VIH
Full
1.5
5.5
Input logic low
VIL
Full
0
0.6
Input leakage
current
IIH, IIL
(1)
25°C
VI = 5.5 V or 0
Full
1.95 V
–2
2
20
20
V
nA
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
11
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Electrical Characteristics for 1.8-V Supply (1) (Continued)
V+ = 1.65 V to 1.95 V, TA = –40°C to 85°C (unless otherwise noted)
PARAMETER
SYMBOL
TEST CONDITIONS
TA
V+
MIN
25°C
1.8 V
10
Full
1.65 V to
1.95 V
10
25°C
1.8 V
2
Full
1.65 V to
1.95 V
2
TYP MAX UNIT
Dynamic
Turn-on time
tON
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Turn-off time
tOFF
VCOM = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 19
Break-beforemake time
tBBM
VNC = VNO = V+,
RL = 50 Ω,
CL = 35 pF,
See Figure 20
Charge injection
QC
VGEN = 0,
RGEN = 0,
35
70
75
15
ns
40
50
ns
25°C
1.8 V
Full
1.65 V to
1.95 V
22
CL = 1 nF,
See Figure 24
25°C
1.8 V
–4
pC
2
70
ns
NC, NO
off
capacitance
CNC(OFF),
CNO(OFF)
VNC or VNO = V+ or GND,
Switch off,
See Figure 18
25°C
1.8 V
18
pF
NC, NO
on capacitance
CNC(ON),
CNO(ON)
VNC or VNO = V+ or GND,
Switch on,
See Figure 18
25°C
1.8 V
55
pF
COM
on capacitance
CCOM(ON)
VCOM = V+ or GND,
Switch on,
See Figure 18
25°C
1.8 V
55
pF
VI = V+ or GND,
See Figure 18
25°C
1.8 V
2
pF
Digital input
capacitance
CI
Bandwidth
BW
RL = 50 Ω,
Switch on,
See Figure 21
25°C
1.8 V
105
MHz
Off isolation
OISO
RL = 50 Ω,
f = 1 MHz,
Switch off,
See Figure 22
25°C
1.8 V
64
dB
Crosstalk
XTALK
RL = 50 Ω,
f = 1 MHz,
Switch on,
See Figure 23
25°C
1.8 V
64
dB
Total harmonic
distortion
THD
RL = 600 Ω,
CL = 50 pF,
f = 20 Hz to 20 kHz,
See Figure 25
25°C
1.8 V
0.06
%
VI = V+ or GND,
Switch on or off
Supply
Positive supply
current
(1)
12
I+
25°C
Full
1.95 V
The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
Submit Documentation Feedback
5
15
50
µA
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
TYPICAL PERFORMANCE
3.50
3.00
1.3
1.1
ron (Ω)
ron (Ω)
2.50
TA = 85°C
TA = 25°C
TA = −40°C
1.5
V+ = 1.8 V
V+ = 2.5 V
V+ = 3.3 V
V+ = 5 V
2.00
1.50
0.9
0.7
1.00
0.5
0.50
0.3
0.1
0.00
0.0
0.5
1.0
1.5
0
2.0
1
2
VCOM (V)
VCOM (V)
Figure 2. ron vs VCOM
3
4
Figure 3. ron vs VCOM (V+ = 3.3 V)
1.0
20
COM (on)
0.9
0.8
Leakage (nA)
ron (Ω)
0.7
0.6
0.5
0.4
TA = 85°C
TA = 25°C
TA = −40°C
0.3
0.2
1
2
3
4
5
NO/NC (off)
−20
NO/NC (on)
0.1
0
0
−40
−60
6
−40
−20
0
VCOM (V)
Figure 4. ron vs VCOM (V+ = 5 V)
COM (pwroff)
Charge Injection (pC)
3000
Leakage (nA)
2500
2000
1500
1000
500
NO/NC (pwroff)
0
70
60
50
40
30
−20
0
20
60
80
100
40
60
80
V+ = 5 V
V+ = 3 V
20
10
0
−10
−20
−30
0
−40
40
Figure 5. Leakage Current vs Temperature
(V+ = 3.3 V)
3500
−500
−60
20
Temperature (°C)
100
1
2
3
4
5
6
Bias Voltage (V)
Temperature (°C)
Figure 6. Leakage Current vs Temperature
(V+ = 5 V)
Submit Documentation Feedback
Figure 7. Charge Injection vs Bias Voltage
13
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
TYPICAL PERFORMANCE (continued)
45
16
40
tON
14
35
30
tON/tOFF (ns)
tOFF
12
20
I+ (µA)
25
tOFF
15
10
8
6
10
4
5
2
0
0
1
2
3
4
5
tON
0
6
−40°C
25°C
V+ (V)
85°C
TA (5C)
Figure 8. tON and tOFF vs Supply Voltage
Figure 9. I+ vs Temperature
0
2.5
VIN rising
−2
2.0
1.0
Gain (dB)
I+ (µA)
−4
VIN falling
1.5
−6
−8
−10
0.5
−12
0.0
−40°C
25°C
−14
0.1
85°C
1
TA (5C)
Figure 10. I+ vs Temperature
0.010
−10
0.009
1000
0.008
−30
THD + (%)
Attenuation (dB)
−20
−40
−50
−60
0.007
0.006
0.005
−70
0.004
−80
0.003
1
10
Frequency (MHz)
100
1000
0.002
0.001
0
10
Figure 12. Attenuation vs Frequency
14
100
Figure 11. Bandwidth (V+ = 5 V)
0
−90
0.1
10
Frequency (MHz)
100
1000
Frequency (Hz)
10000
100000
Figure 13. Total Harmonic Distortion vs Frequency
(V+ = 5 V)
Submit Documentation Feedback
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
TYPICAL PERFORMANCE (continued)
180
160
140
I+ (µA)
120
100
80
60
40
20
0
−20
−40°C
25°C
85°C
TA (5C)
Figure 14. Power-Supply Current vs Temperature
(V+ = 5 V)
PIN DESCRIPTION
NO.
NAME
1
NO
Normally open
DESCRIPTION
2
GND
Digital ground
3
NC
4
COM
5
V+
Power supply
6
IN
Digital control to connect COM to NO
Normally closed
Common
Submit Documentation Feedback
15
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
PARAMETER DESCRIPTION
SYMBOL
VCOM
Voltage at COM
VNC
Voltage at NC
VNO
Voltage at NO
ron
Resistance between COM and NC or COM and NO ports when the channel is on
rpeak
Peak on-state resistance over a specified voltage range
∆ron
Difference of ron between channels
ron(flat)
Difference between the maximum and minimum value of ron in a channel over the specified range of conditions
INC(OFF)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the off state under
worst-case input and output conditions
INC(PWROFF)
INO(OFF)
INO(PWROFF)
Leakage current measured at the NC port during the power-down condition, V+ = 0
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the off state under
worst-case input and output conditions
Leakage current measured at the NO port during the power-down condition, V+ = 0
INC(ON)
Leakage current measured at the NC port, with the corresponding channel (NC to COM) in the on state and the
output (COM) being open
INO(ON)
Leakage current measured at the NO port, with the corresponding channel (NO to COM) in the on state and the
output (COM) being open
ICOM(ON)
ICOM(PWROFF)
Leakage current measured at the COM port, with the corresponding channel (COM to NO or COM to NC) in the on
state and the output (NC or NO) being open
Leakage current measured at the COM port during the power-down condition, V+ = 0
VIH
Minimum input voltage for logic high for the control input (IN)
VIL
Maximum input voltage for logic low for the control input (IN)
VI
Voltage at (IN)
IIH, IIL
Leakage current measured at (IN)
tON
Turn-on time for the switch. This parameter is measured under the specified range of conditions and by the
propagation delay between the digital control (IN) signal and analog outputs (COM, NC, or NO) signal when the
switch is turning on.
tOFF
Turn-off time for the switch. This parameter is measured under the specified range of conditions and by the
propagation delay between the digital control (IN) signal and analog outputs (COM, NC, or NO) signal when the
switch is turning off.
tBBM
Break-before-make time. This parameter is measured under the specified range of conditions and by the
propagation delay between the output of two adjacent analog channels (NC and NO) when the control signal
changes state.
QC
Charge injection is a measurement of unwanted signal coupling from the control (IN) input to the analog (NC, NO,
or COM) output. This is measured in coulomb (C) and measured by the total charge induced due to switching of
the control input. Charge injection, QC = CL × ∆VO, CL is the load capacitance and ∆VO is the change in analog
output voltage.
CNC(OFF)
Capacitance at the NC port when the corresponding channel (NC to COM) is off
CNO(OFF)
Capacitance at the NO port when the corresponding channel (NO to COM) is off
CNC(ON)
Capacitance at the NC port when the corresponding channel (NC to COM) is on
CNO(ON)
Capacitance at the NO port when the corresponding channel (NO to COM) is on
CCOM(ON)
CIN
Capacitance at the COM port when the corresponding channel (COM to NC or COM to NO) is on
Capacitance of (IN)
OISO
OFF isolation of the switch is a measurement off-state switch impedance. This is measured in dB in a specific
frequency, with the corresponding channel (NC to COM or NO to COM) in the off state.
XTALK
Crosstalk is a measurement of unwanted signal coupling from an on channel to an off channel (NC to NO or NO to
NC). This is measured in a specific frequency and in dB.
BW
Bandwidth of the switch. This is the frequency in which the gain of an on channel is –3 dB below the DC gain.
THD
Total harmonic distortion describes the signal distortion caused by the analog switch. This is defined as the ratio or
root mean square (RMS) value of the second, third, and higher harmonic to the absolute magnitude of the
fundamental harmonic.
I+
16
DESCRIPTION
Static power supply current with the control (IN) pin at V+ or GND
Submit Documentation Feedback
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
PARAMETER MEASUREMENT INFORMATION
V+
VNC NC
COM
+
VCOM
Channel On
VNO NO
r on +
IN
VI
ICOM
VCOM * VNO or VNC
W
I COM
VI = VIH or VIL
+
GND
Figure 15. On-State Resistance (ron)
V+
VNC NC
COM
+
VCOM
+
VNO NO
IN
VI
Off-State Leakage Current
Channel Off
VI = VIH or VIL
+
GND
Figure 16. OFF-State Leakage Current (INC(OFF), INC(PWROFF), INO(OFF), INO(PWROFF), ICOM(OFF), ICOM(PWROFF))
V+
VNC NC
COM
+
VNO NO
VI
VCOM
On-State Leakage Current
Channel On
VI = VIH or VIL
IN
+
GND
Figure 17. On-State Leakage Current (ICOM(ON), INC(ON), INO(ON))
Submit Documentation Feedback
17
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
V+
Capacitance
Meter
VNC
NC
VNO
NO
VBIAS = V+ or GND
VI = V+ or GND
VCOM COM
VBIAS
VI
Capacitance is measured at NC,
NO, COM, and IN inputs during
on and off conditions.
IN
GND
Figure 18. Capacitance (CI, CCOM(ON), CNC(OFF), CNO(OFF), CNC(ON), CNO(ON))
V+
VCOM
NC or NO
VNC or VNO
NC or NO
CL(2)
TEST
RL
CL
VCOM
tON
50 Ω
35 pF
V+
tOFF
50 Ω
35 pF
V+
COM
RL
IN
VI
Logic
Input(1)
CL(2)
GND
RL
V+
Logic
Input
(VI)
50%
50%
0
tON
Switch
Output
(VNC or VNO)
90%
90%
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 19. Turn-On (tON) and Turn-Off Time (tOFF)
18
tOFF
Submit Documentation Feedback
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
V+
Logic
Input
(VI)
VNC or VNO
NC or NO
VCOM
V+
50%
0
COM
NC or NO
CL(2)
VI
Switch
Output
(VCOM)
RL
IN
90%
90%
tBBM
Logic
Input(1)
VNC or VNO = V+
RL = 50 Ω
CL = 35 pF
GND
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 20. Break-Before-Make Time (tBBM)
V+
Network Analyzer
50 W
VNC
NC
Channel On: NC to COM
COM
Source
Signal
VCOM
VI = V+ or GND
NO
Network Analyzer Setup
IN
VI
50 W
+
Source Power = 0 dBm
(632-mV P-P at 50-W load)
GND
DC Bias = 350 mV
Figure 21. Bandwidth (BW)
V+
Network Analyzer
Channel Off: NC to COM
50 W
VNC
NC
VI = V+ or GND
COM
Source
Signal
50 W
VCOM
NO
Network Analyzer Setup
IN
Source Power = 0 dBm
(632-mV P-P at 50-W load)
VI
50 W
+
GND
DC Bias = 350 mV
Figure 22. OFF Isolation (OISO)
Submit Documentation Feedback
19
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
V+
Network Analyzer
Channel On: NC to COM
50 W
VNC
Channel Off: NO to COM
NC
VCOM
Source
Signal
VNO
NO
VI
50 W
VI = V+ or GND
Network Analyzer Setup
50 W
IN
+
Source Power = 0 dBm
(632-mV P-P at 50-W load)
GND
DC Bias = 350 mV
Figure 23. Crosstalk (XTALK)
V+
RGEN
VGEN
Logic
Input
(VI)
OFF
ON
OFF V
IL
NC or NO
COM
+
VIH
VCOM
∆VCOM
VCOM
NC or NO
CL(2)
VI
Logic
Input(1)
VGEN = 0 to V+
IN
RGEN = 0
CL = 1 nF
QC = CL × ∆VCOM
VI = VIH or VIL
GND
A.
All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 Ω, tr < 5 ns,
tf < 5 ns.
B.
CL includes probe and jig capacitance.
Figure 24. Charge Injection (QC)
20
Submit Documentation Feedback
TS5A3159A
1-Ω SPDT ANALOG SWITCH
5-V/3.3-V SINGLE-CHANNEL 2:1 MULTIPLEXER/DEMULTIPLEXER
www.ti.com
SCDS200A – AUGUST 2005 – REVISED FEBRUARY 2007
Channel On: COM to NC
VSOURCE = V+ P-P
VI = VIH or VIL
RL = 600 Ω
fSOURCE = 20 Hz to 20 kHz
CL = 50 pF
V+/2
V+
Audio Analyzer
RL
Source
Signal
10 mF
NO
10 mF
COM
600 W
NC
600 W
VI
CL(1)
IN
GND
600 W
A.
CL includes probe and jig capacitance.
Figure 25. Total Harmonic Distortion (THD)
Submit Documentation Feedback
21
PACKAGE OPTION ADDENDUM
www.ti.com
4-May-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
TS5A3159ADBVR
ACTIVE
SOT-23
DBV
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADBVRE4
ACTIVE
SOT-23
DBV
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADBVT
ACTIVE
SOT-23
DBV
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADBVTE4
ACTIVE
SOT-23
DBV
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKR
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKRE4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKRG4
ACTIVE
SC70
DCK
6
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKT
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKTE4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159ADCKTG4
ACTIVE
SC70
DCK
6
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
TS5A3159AYZPR
ACTIVE
WCSP
YZP
6
3000 Green (RoHS &
no Sb/Br)
SNAGCU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
4-May-2007
to Customer on an annual basis.
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
19-May-2007
TAPE AND REEL INFORMATION
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
Device
19-May-2007
Package Pins
Site
Reel
Diameter
(mm)
Reel
Width
(mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
TS5A3159ADBVR
DBV
6
HNT
180
9
3.23
3.17
1.37
4
8
Q3
TS5A3159ADBVT
DBV
6
HNT
180
9
3.23
3.17
1.37
4
8
Q3
TS5A3159ADCKR
DCK
6
HNT
180
9
2.24
2.34
1.22
4
8
Q3
TS5A3159ADCKT
DCK
6
HNT
180
9
2.24
2.34
1.22
4
8
Q3
TS5A3159AYZPR
YZP
6
ASEK
180
8
1.02
1.52
0.66
4
8
Q1
TAPE AND REEL BOX INFORMATION
Device
Package
Pins
Site
Length (mm)
Width (mm)
Height (mm)
TS5A3159ADBVR
DBV
6
HNT
202.0
201.0
28.0
TS5A3159ADBVT
DBV
6
HNT
202.0
201.0
28.0
TS5A3159ADCKR
DCK
6
HNT
202.0
201.0
28.0
TS5A3159ADCKT
DCK
6
HNT
202.0
201.0
28.0
TS5A3159AYZPR
YZP
6
ASEK
220.0
220.0
34.0
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
19-May-2007
Pack Materials-Page 3
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
RFID
www.ti-rfid.com
Telephony
www.ti.com/telephony
Low Power
Wireless
www.ti.com/lpw
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated