Complement to UB2 Pushbuttons UB2 Indicators TYPICAL INDICATOR ORDERING EXAMPLE UB2 01 MOUNTING TYPES PCB Mounting 01 Square Snap-in Mounting 04 4J W03 6CF K LEDS CAP TYPES & COLORS Bright LED Sculptured Cap Lens/Diffuser Colors 5C Red 5D Amber 5F Green Square 1JB Clear/White 1JC Clear/Red 1JD Clear/Amber 1JF Clear/Green 01 Beveled Cap & Colors HOUSING K Black 2B White 2C Red 2D Amber 2F Green Flat Cap Lens/Diffuser Colors TERMINALS W03 Silver PC/Turret Super Bright LED 6B White 6F Green 6G Blue 3JB Clear/White 3JC Clear/Red 3JD Clear/Amber 3JF Clear/Green Sculptured Cap Lens/Diffuser Color 1JB Clear/White Beveled Cap & Color 2B White Flat Cap Lens/Diffuser Color 3JB Super Bright Bicolor LED 6CF Red/Green Clear/White Sculptured Cap Lens/Diffuser Color 1JB Clear/White Beveled Cap & Color DESCRIPTION FOR TYPICAL ORDERING EXAMPLE UB201KW036CF-4J01 2B Flat Cap Lens/Diffuser Color 3JB Square with PCB Mounting Clear/White Sculptured Cap with Alternating Legend Sculptured Cap with ONOFF Dual Legend Filter Red/Green Super Bright Bicolor LED White Black Housing Silver PC/Turret Terminals 4J Clear Lens Flat Cap with Alternating Legend 5J Clear Lens ALTERNATING LEGENDS 01 ON/OFF 02 START/STOP 04 OPEN/CLOSE NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to UB2 Pushbuttons UB2 Indicators MOUNTING TYPES, SHAPES, & TERMINALS PCB Mounting 01 Snap-in Mounting 04 Square Terminals W03 Square with Built-in Bezel Silver PC/Turret (0.2) .008 (4.0) .157 (1.0) .039 Thk = (0.5) .020 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm) LED COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. Polarity marks are on the bottom of the device. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. The LED is an integral part of the indicator and not available separately. Bright Note for Super Bright: Attention Electrostatic Sensitive Devices Color Super Bright Super Bright 5C 5D 5F 6B 6F 6G 6CF Red Amber Green White Green Blue Red/Green Unit 30 30 25 25 25 25 30/25 Amber 25/22 mA Forward Peak Current IFM Continuous Forward Current IF 20 20 20 20 20 20 20/20 mA Forward Voltage VF 1.85 2.0 2.1 3.6 3.5 3.6 2.1/3.5 V Reverse Peak Voltage VRM 5 5 5 5 5 5 4/4 V Current Reduction Rate Above 25°C ∆IF 0.40 0.42 0.46 0.40 0.40 0.40 0.40/0.33 mA/°C –25° ~ +50 °C Ambient Temperature Range Bright Single Color LED with 1 element (+) –25° ~ +50 (-) Super Bright Single Color LED with 1 element (+) –20° ~ +50 (-) Super Bright Bicolor LED with 2 elements LC (+) L1 (-) Red L2 (-) Green Amber color can be achieved by lighting red and green simultaneously on the bicolor LED (not suitable for Alternating Legends). NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 UB2 Indicators Complement to UB2 Pushbuttons CAP TYPES & COLOR COMBINATIONS 1 AT3074 Scupltured Lens/Diffuser Colors Available: (6.1) .240 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy JB Clear/ White JC Clear/ Red JD Clear/ Amber JF Clear/ Green 2 AT3075 Beveled Cap Colors Available: (5.6) .220 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy 3 B White C Red D Amber F Green AT3076 Flat Lens/Diffuser Colors Available: (5.6) .220 (15.0) Sq .591 Material: Polycarbonate Finish: Glossy JB Clear/ White JC Clear/ Red JD Clear/ Amber JF Clear/ Green Alternating Legend Caps for Super Bright Bicolor LED 4J AT3069J Sculptured Cap with Alternating Legend AT3070J Flat Cap with Alternating Legend 5J Clear Lens Alternating Legend Filter E OESN OCLP NF OF (6.1) .240 Clear Lens Alternating Legend Filter (15.0) Sq .591 Material: Polycarbonate (5.6) .220 (15.0) Sq .591 Finish: Glossy Standard Alternating Legend Pairs 01 ON OFF Green Red 02 START STOP Green Red 04 OPEN CLOSE Green Red Cap illumination is alternating green/red; legend text is black. Contact factory for other Alternating Legends. Legend illustrations are approximate representations of the actual characters on the filters. TYPICAL INDICATOR DIMENSIONS PCB Mount L+ L+ N.C. (15.0) Sq .591 (2.54) Typ .100 (0.5) Typ .020 (8.5) .335 (15.24) Sq .600 UB201KW035C-1JC (0.5) .020 (10.0) .394 (5.08) .200 N.O. COM L– (4.0) .157 L- (5.08) .200 (1.2) Dia Typ .047 (1.0) .039 Snap-in Mount L+ N.C. (15.0) Sq .591 UB204KW035C-1JC (2.54) Typ .100 (0.5) Typ .020 (19.0) Sq .748 (3.0) .118 (1.4) .055 (15.5) .610 (4.0) .157 (5.08) .200 N.O. COM (17.4) Sq .685 L– (1.0) .039 Panel Thickness: .039 ~ .126” (1.0 ~ 3.2mm) NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07