MSD601−RT1, MSD601−ST1 Preferred Device NPN General Purpose Amplifier Transistors Surface Mount Features http://onsemi.com • Pb−Free Packages are Available COLLECTOR 3 MAXIMUM RATINGS (TA = 25°C) Rating Symbol Value Unit Collector − Base Voltage V(BR)CBO 60 Vdc Collector − Emitter Voltage V(BR)CEO 50 Vdc Emitter − Base Voltage V(BR)EBO 7.0 Vdc IC 100 mAdc IC(P) 200 mAdc Symbol Max Unit Power Dissipation PD 200 mW Junction Temperature TJ 150 °C Storage Temperature Tstg −55 ~ +150 °C Collector Current − Continuous Collector Current − Peak 2 BASE MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristic 1 EMITTER 3 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. SC−59 CASE 318D 2 Yx M G G 1 x = R for RT1 S for ST1 M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Preferred devices are recommended choices for future use and best overall value. © Semiconductor Components Industries, LLC, 2006 January, 2006 − Rev. 7 1 Publication Order Number: MSD601−RT1/D MSD601−RT1, MSD601−ST1 ELECTRICAL CHARACTERISTICS (TA = 25°C) Characteristic Symbol Min Max Unit Collector − Emitter Breakdown Voltage (IC = 2.0 mAdc, IB = 0) V(BR)CEO 50 − Vdc Collector − Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO 60 − Vdc Emitter − Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 70 − Vdc Collector − Base Cutoff Current (VCB = 45 Vdc, IE = 0) ICBO − 0.1 mAdc Collector − Emitter Cutoff Current (VCE = 10 Vdc, IB = 0) ICEO − 100 nAdc DC Current Gain (Note 1) (VCE = 10 Vdc, IC = 2.0 mAdc) MSD601−RT1 MSD601−ST1 (VCE = 2.0 Vdc, IC = 100 mAdc) − hFE1 Collector − Emitter Saturation Voltage (IC = 100 mAdc, IB = 10 mAdc) hFE2 210 290 90 340 460 − VCE(sat) − 0.5 Vdc 1. Pulse Test: Pulse Width ≤ 300 ms, D.C. ≤ 2%. ORDERING INFORMATION Package Shipping † SC−59 3000 Units / Reel SC−59 (Pb−Free) 3000 Units / Reel SC−59 3000 Units / Reel SC−59 (Pb−Free) 3000 Units / Reel Device MSD−601RT1 MSD−601RT1G MSD−601ST1 MSD−601ST1G †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 2 MSD601−RT1, MSD601−ST1 PACKAGE DIMENSIONS SC−59 CASE 318D−04 ISSUE G D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3 HE 2 E 1 DIM A A1 b c D E e L HE b e MILLIMETERS NOM MAX 1.15 1.30 0.06 0.10 0.43 0.50 0.14 0.18 2.90 3.10 1.50 1.70 1.90 2.10 0.40 0.60 2.80 3.00 C A A1 MIN 1.00 0.01 0.35 0.09 2.70 1.30 1.70 0.20 2.50 STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR L SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.4 0.094 1.0 0.039 0.8 0.031 SCALE 10:1 mm Ǔ ǒinches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 MIN 0.039 0.001 0.014 0.003 0.106 0.051 0.067 0.008 0.099 INCHES NOM 0.045 0.002 0.017 0.005 0.114 0.059 0.075 0.016 0.110 MAX 0.051 0.004 0.020 0.007 0.122 0.067 0.083 0.024 0.118 MSD601−RT1, MSD601−ST1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 4 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MSD601−RT1/D