OTS-1SD2DTR Optiva Standard, 1 SDI 270 Mbps and 2 Duplex RS-232/422/485 Data ™ SDI Video and Serial Data Transmission The OTS-1SD2DTR provides for the digital transmission of 1 Channel of uncompressed SDI Video and 2 Channels of duplex Serial Data, at absolute broadcast quality. Video 2 Serial Data In/Out System Design Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ A L E R T S T A T U S 2 Serial Data Out/In SDI Video In A L E R T S T A T U S ST, LC, SC or FC ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1SDT2DTR SDI Video Out Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. OTS-1SDR2DTR Features • Uncompressed SDI Video and Serial Data over one fiber • TDM - Single fiber, dual wavelength • Complies with SMPTE 259 for uncompressed SDI Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing The Optiva™ bandwidth requirement of this system is 369 Mbps. • Ideal for Broadcast/Studio and Professional AV applications • No EMI or RFI and no ground loops • Stand alone or rack-mount Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1SDT2DTR-A2/A3M-XX-IC OTS-1SDT2DTR-A2/A3-XX-IC OTS-1SDT2DTR-A2/A3D-XX-IC OTS-1SDT2DTR-A2/A3H-XX-IC OTS-1SDT2DTR-L4/L4-XX-IC OTS-1SDR2DRT-A3M/A2-XX-IC OTS-1SDR2DRT-A3/A2-XX-IC OTS-1SDR2DRT-A3D/A2-XX-IC OTS-1SDR2DRT-A3H/A2-XX-IC OTS-1SDR2DRT-L4/L4-XX-IC Non-Optical Version OTS-1SDT2DTR-NOC-IC OTS-1SDR2DRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice SDI & HD-SDI Video Standard Pathological test code Bit rate Bit error rate Connector Data Connector RS-232, RS-422 Data Rate RS-485 (2 Wire) Data Rate RS-485 (4 Wire) Data Rate Optiva™ Configurable SMPTE 259 RP-178 270 Mbps 10-14 BNC (IEC 60169-8) Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data Micro DB25 RGB/VGA/DVI Audio/FSK/Intercom DC to 1 Mbps Data (Ethernet/Serial/USB) DC to 1 Mbps CATV/RF & L-Band DC to 1 Mbps Optical Switching, Routing & Redundancy General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 1 Amp Max per Insert Card Less than 1ms 11 oz Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration