OTS-1ETR Optiva Standard, 1 Duplex 10/100 Mbps Ethernet ™ Ethernet Transmission The OTS-1ETR provides auto-sensing digital transmission of 1 Channel of 10/100 Ethernet. Video Audio Data Ethernet Ethernet In Ethernet Out System Design Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva™ Desktop Card Racks (OT-DTCR Series). The Optiva™ Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Optiva™ Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva™ system daisy-chain. (See “Non-Optical Version” below). ST, LC, SC or FC ST, LC, SC or FC Optiv a™ Optiv a™ VAD Transmission VAD Transmission OTS-1ETR OTS-1ERT For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Features • Uncompressed 10/100 Ethernet over one fiber • TDM - Single fiber, dual wavelength • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount The Optiva™ bandwidth requirement of this system is 172 Mbps. Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-1ETR-A2/A3M-XX-IC OTS-1ETR-A2/A3-XX-IC OTS-1ETR-A2/A3D-XX-IC OTS-1ETR-A2/A3H-XX-IC OTS-1ETR-L4/L4-XX-IC OTS-1ERT-A3M/A2-XX-IC OTS-1ERT-A3/A2-XX-IC OTS-1ERT-A3D/A2-XX-IC OTS-1ERT-A3H/A2-XX-IC OTS-1ERT-L4/L4-XX-IC Non-Optical Version OTS-1ETR-NOC-IC OTS-1ERT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Data (Ethernet/Serial/USB) Data Standard Data Rate Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™ Configurable Communication Platform Ethernet IEEE 802.3 (Auto-Negotiation) 10/100 Mbps RJ-45 Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC Network Management SDI & HD-SDI 11 oz Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom 1 Amp Max per Insert Card Less than 1ms Data (Ethernet/Serial/USB) LED Status Indication Optical Switching, Routing & Redundancy Compatible with OptivaView™ SNMP Management Suite CATV/RF & L-Band Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories MADE IN THE USA Sample Configuration