Oscilent Corporation | 566 Series VCXO - Voltage Control Crystal Oscillator Page 1 of 2 VCXO Surface Mount Series Number Package Description Last Modified 566 6 Pad PCB SMD HCMOS / TTL Jan. 01 2007 FEATURES - Wave form symmetry of 40/60% - SMD Version 6 Pad - 3.3V operation (optional) - Tape and Reel - RoHs / Lead Free compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS CONDITIONS CHARACTERISTICS UNITS Output Logic - Input Voltage (VDD) - Frequency Range (fO) - 1.5440 ~ 52.0 MHz Operating Temperature (TOPR) - 0 ~ +70 (Std.) / -40 ~ 85 (Option) °C Storage Temperature (TSTG) - -55 ~ +125 °C Overall Frequency Stability Input Current (IDD) Aging Rise Time (TR) / Fall Time (TF) Pin 1 Control Voltage Range Output Voltage High "1" VOH HCMOS / TTL Output 3.3 ±10% - 5.0 ±10% VDC a+b+c+d ±20, ±25, ±50, ±100 max. PPM (a) Frequency Tolerance Inclusive of Overall Stability - (b) Temperature Stability Inclusive of Overall Stability (Operating Temperature) - (c) Input Voltage Stability Inclusive of Overall Stability (VDD ±5%) - (d) Load Stability Inclusive of Overall Stability (RL ±5%) - - 10 ~ 45 max. 15 ~ 85 max. @ 25°C ±1 max. < 66.660 MHz 10 max. (0.4V to 2.4V / TTL; Waveform / HCMOS) > 66.660 MHz 4 max. (0.4V to 2.4V / TTL; Waveform / HCMOS) - PPM/Y 1.65 ±1.35 TTL Load HCMOS Load 2.5 ±2 2.4 min. 2.7 min. mA VDD-0.5 min. nS V VDC TTL Load 0.4 max. HCMOS Load 0.5 max. Duty Cycle - 50 ±10 (Std.) / 50 ±5 (Option) % Start-Up Time (TS) - 10 max. ms ps Output Voltage Low "0" VOL VDC (One Sigma) ±25 max. (Under 52 MHz) , ±50 max. (Over 52 MHz) Linearity - ±20 (Std.) / ±10 (Option) / Custom Spec. Avail. % Absolute Pull Range (APR) - ±50, ±100, ±150 min. PPM Jitter Oscilent Corporation | 566 Series VCXO - Voltage Control Crystal Oscillator Page 2 of 2 PIN CONNECTIONS #1 Control Voltage #2 Tri-State Enable High (TS) or No Connection (NC) #3 CASE GND #4 OUTPUT #5 No Connection (NC) #6 VDD PART NUMBER GUIDE Series Number 566 Oscilent VCXO Frequency Voltage Supply Option - 12.0 M -3 Enter your desired 5 = 5VDC frequency e.g. 12.0M 3 = for 12.000MHz 3.3VDC Frequency Tolerance & Stability (max.) E D= E= F= G= H= ±100 PPM ±50 PPM ±25 PPM ±20 PPM ±10 PPM Operating Temp. (°C) N Blank* = 0~+70 N = -40~+85 Duty Cycle -T Blank*= 50±10% T= 50±5% Pulling Range Linearity P1 20 P1 = ±50PPM 20 = 20% P2 = ±100PPM 10 = 10% P3 = ±150PPM 05 = 5% Pin 2 Connection NC NC = No Connection TS = TriState Enable High NOTE: - Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: - Click on the characteristic names above for definitions of that particular characteristic. *STANDARDS: - "Blank" part number selections indicate standard variables for that particular characteristic. PACKAGING: - Standard tube packaging, add -TR for Tape/Reel. Click here for tape/reel specifications Series No.: 566 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map