MODULES VI-ARM A C I N P U T - A U T O R A N G I N G FEATURES • • • • • • • • Autoranging Input Microprocessor Controlled 96-98% Efficiency 100°C Baseplate (no derating) UL, CSA, TÜV, VDE, BABT, CE Marked, C-Tick Bus AC OK, Module Enable Inrush Limiting (no external circuitry) CE Marked Specifications Selection Table GENERAL Parameter VI-ARM-C12 VI-ARM-C22 AC line input 90-132Vac to 180Vac to -VI-ARM PART NUMBERS (BY PRODUCT GRADE) Short pin Long pin 500W/750W 1000W/1500W 500W/750W 1000W/1500W Autoranging Autoranging VI-ARM-C11 VI-ARM-C21 VI-ARM-C12 VI-ARM-C22 47Hz to 63Hz 47Hz to 63Hz VI-ARM-T11 VI-ARM-T21 VI-ARM-T12 VI-ARM-T22 500W:(90-132Vac) 1000W:(90-132Vac) 750W:(180-264Vac) 1500W:(180-264Vac) Output power rating Efficiency 97% Inrush current <15A, 132Vac Isolation vVoltage None, it is provided by DC/DC convertersInput to Output Input/output tobaseplate 1,500VRMS Dimensions:- 579 x 36.8 x 12.7mm <30A, 132Vac(No external circuitry) 1,500VRMS (Typical at TBP – 25oC unless otherwise specified) STANDARDS AND APPROVALS C-Tick AS/NZS CISPR11 Group 1 Class A VI-ARM Connection Diagram - Typical Configuration 248