CPH6074 Ordering number : ENA1474 SANYO Semiconductors DATA SHEET CPH6074 PNP Epitaxial Planar Silicon Transistor For VHF frequency conversion, local oscillation Features • • • • High cut-off frequency (fT=1.2GHz typ). Low Cob (Cob=1.2pF typ). The two chips contained are equivalent to the 2SA1778. Composite type with 2 devices contained in one package, facilitating high-density mounting. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Dissipation Symbol Ratings Unit -15 V -15 V VEBO IC -3 V -50 mA When mounted on glass epoxy substrate 1unit 300 mW When mounted on glass epoxy substrate 500 mW Junction Temperature PC PT Tj Storage Temperature Tstg Total Power Dissipation Conditions VCBO VCEO 150 °C -55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Symbol ICBO IEBO hFE Output Capacitance fT Cob Reverse Transfer Capacitance Cre Conditions Ratings min typ VCB= -15V, IE=0A VEB= -2V, IC=0A VCE= -10V, IC= -5mA VCE= -10V, IC= -5mA VCB= -10V, f=1MHz VCB= -10V, f=1MHz 60 0.6 max Unit -0.1 μA -0.1 μA 120 1.2 1.2 GHz 1.7 0.9 pF pF Marking : GQ Note) The specifications shown above are for each individual transistor. Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. www.semiconductor-sanyo.com/network 51309AB MS IM TC-00001958 No. A1474-1/3 CPH6074 Package Dimensions Electrical Connection unit : mm (typ) 7018A-006 6 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 4 0.2 0.6 5 4 0.15 2.9 6 5 2.8 1.6 0.05 1 2 3 2 0.95 0.9 0.2 0.6 Top view 1 3 0.4 1 : Emitter1 2 : Base1 3 : Collector2 4 : Emitter2 5 : Base2 6 : Collector1 SANYO : CPH6 IC -- VCE --30 IC -- VCE --10 --120 Collector Current, IC -- mA --25 μA --300 A --250μ --20 --200μA --15 --150μA --100μA --10 --50μA --5 Collector Current, IC -- mA --9 μA A --100μ --8 --80μA --7 --60μA --6 --5 --40μA --4 --3 --20μA --2 --1 0 IB=0μA 0 Collector-to-Emitter Voltage, VCE -- V IC -- VBE --30 0 --1 --2 --3 --4 --5 --6 --7 --8 --9 --10 --11 --12 --13 --14--15 IB=0μA 0 --1 --2 --3 --4 --5 --6 --7 --8 --9 --10 --11 --12 --13 --14--15 Collector-to-Emitter Voltage, VCE -- V IT14673 hFE -- IC 3 VCE=--10V IT14674 VCE=--10V 2 DC Current Gain, hFE 25°C --15 --25°C --20 Ta=75°C Collector Current, IC -- mA --25 --10 Ta=75°C 25°C 7 --25°C 5 3 2 --5 0 100 0 --0.1 --0.2 --0.3 --0.4 --0.5 --0.6 --0.7 --0.8 --0.9 --1.0 --1.1 Base-to-Emitter Voltage, VBE -- V IT14675 10 3 5 7 --1.0 2 3 5 7 --10 Collector Current, IC -- mA 2 3 5 7 IT14676 No. A1474-2/3 CPH6074 Cob -- VCB 7 Reverse Transfer Capacitance, Cre -- pF Output Capacitance, Cob -- pF 5 3 2 1.0 7 5 3 2 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 Collector-to-Base Voltage, VCB -- V fT -- IC 2 1.0 7 5 3 5 7 --10 2 Collector Current, IC -- mA 3 1.0 7 5 3 2 5 3 5 7 --1.0 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 IT14678 PT, PC -- Ta When mounted on glass epoxy substrate 2 3 2 600 3 2 3 IT14677 VCE= --10V 2 --1.0 f=1MHz 5 2 --0.1 3 Collector Dissipation, PT, PC -- mW Gain-Bandwidth Product, fT -- GHz 5 Cre -- VCB 7 f=1MHz 7 IT14679 500 400 P TT ot al 300 Di ss PC 1u ip ati on nit 200 100 0 0 20 40 60 80 100 120 140 Ambient Temperature, Ta -- °C 160 IT14680 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of May, 2009. Specifications and information herein are subject to change without notice. PS No. A1474-3/3