SANYO EN2828

Ordering number:EN2828
NPN Triple Diffused Planar Silicon Transistor
2SC3994
800V/25A Switching Regulator Applications
Features
Package Dimensions
· High breakdown voltage, high reliability.
· Fast switching speed (tf=0.1µs typ).
· Wide ASO.
· Adoption of MBIT process.
unit:mm
2048B
[2SC3994]
1 : Base
2 : Collector
3 : Emitter
SANYO : TO-3PBL
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Collector-to-Base Voltage
VCBO
1100
V
Collector-to-Emitter Voltage
VCEO
VEBO
800
V
7
V
IC
25
A
60
A
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
ICP
Base Current
IB
Collector Dissipation
Junction Temperature
PC
Tj
Storage Temperature
Tstg
PW≤300µs, duty cycle≤10%
12
A
300
W
150
˚C
–55 to +150
˚C
Tc=25˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
min
typ
max
Unit
Collector Cutoff Current
ICBO
VCB=800V, IE=0
10
µA
Emitter Cutoff Current
IEBO
10
µA
DC Current Gain
hFE1*
hFE2
VEB=5V, IC=0
VCE=5V, IC=1.6A
Gain-Bandwidth Product
Output Capacitance
VCE=5V, IC=8A
10
40
8
fT
VCE=10V, IC=1.6A
15
MHz
Cob
VCB=10V, f=1MHz
470
pF
* : The hFE1 of the 2SC3994 is classified as follows. When specifying the hFE1 rank, specify two ranks or more in principle.
10
K
20
15
L
30
20
M
40
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
N3098HA (KT)/5268TA, TS No.2828–1/4
2SC3994
Parameter
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Symbol
VCE(sat)
VBE(sat)
Conditions
Unit
2.0
V
1.5
V
Collector-to-Emitter Breakdown Voltage
V(BR)CEO IC=10mA, RBE=∞
Emitter-to-Base Breakdown Voltage
V(BR)EBO
Collector-to-Emitter Sustain Voltage
VCEX(sus) IC=12A, IB1=–IB2=–2.4A, L=50µH, clamped
ton
VCC=400V, 5IB1=–2.5IB2=IC=20A, RL=20Ω
Storage Time
max
IC=12A, IB=2.4A
V(BR)CBO IC=1mA, IE=0
Fall Time
typ
IC=12A, IB=2.4A
Collector-to-Base Breakdown Voltage
Turn-ON Time
Ratings
min
IE=1mA, IC=0
1100
V
800
V
7
V
800
V
0.5
µs
tstg
VCC=400V, 5IB1=–2.5IB2=IC=20A, RL=20Ω
3.0
µs
tf
VCC=400V, 5IB1=–2.5IB2=IC=20A, RL=20Ω
0.3
µs
Switching Time Test Circuit
No.2828–2/4
2SC3994
No.2828–3/4
2SC3994
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of November, 1998. Specifications and information herein are subject
to change without notice.
PS No.2828–4/4