STB300NH02L STP300NH02L N-channel 24V - 120A - TO-220 / D2PAK STripFET™ Power MOSFET Preliminary Data Features Type VDSS RDS(on) Max ID STB300NH02L 24V < 1.8mΩ 120A STP300NH02L 24V < 2.2mΩ 120A ■ RDS(on)*Qg industry’s benchmark ■ Conduction losses reduced ■ Switching losses reduced ■ Low profile, very low parasitic inductance 3 3 1 1 2 TO-220 D²PAK Description This product utilizes the latest advanced design rules of ST’s proprietary STripFET™ technology. This is suitable for high current OR-ing application. Figure 1. Internal schematic diagram Applications ■ Switching application – Specifically designed and optimized for high efficiency DC/DC converters – OR-ing Table 1. Device summary Order codes Marking Package Packaging STP300NH02L P300NH02L TO-220 Tube STB300NH02L B300NH02L D²PAK Tape & reel September 2007 Rev 2 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/14 www.st.com 14 Contents STB300NH02L - STP300NH02L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 ................................................ 8 STB300NH02L - STP300NH02L 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 24 V VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage ± 20 V Drain current (continuous) at TC = 25°C 120 A Drain current (continuous) at TC = 100°C 120 A Drain current (pulsed) 480 A Total dissipation at TC = 25°C 300 W 2 W/°C -55 to 175 °C Value Unit ID (1) ID (1) IDM (2) PTOT (3) Derating factor Tj Operating junction temperature 1. This value is silicon limited 2. Pulse width limited by safe operating area 3. This value is rated according Rthj-case Table 3. Symbol Thermal data Parameter Rthj-case Thermal resistance junction-case max 0.5 °C/W Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W Max value Unit Table 4. Symbol Avalanche characteristics Parameter IAV Not-repetitive avalanche current (pulse width limited by Tj max) 60 A EAS (1) Single pulse avalanche energy 1.6 J 1. Starting Tj = 25°C, ID = IAV, VDD = 20V 3/14 Electrical characteristics 2 STB300NH02L - STP300NH02L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 5. Symbol Parameter V(BR)DSS Drain-source breakdown voltage Test conditions Min. ID = 1mA, VGS= 0 Typ. VDS = 20V, IGSS Gate body leakage current (VDS = 0) VDS = ±20V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 80A TO-220 D²PAK 1.8 1.4 RDS(on) Static drain-source on resistance VGS= 10V, ID= 80A @100°C TO-220 D²PAK 2.7 2.1 Ciss Coss Crss Qg VDS = 20V, Tc=125°C 1 1 10 µA µA ±100 nA 2 V 2.2 1.8 mΩ mΩ mΩ mΩ Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS = 15V, f = 1 MHz, VGS =0 VDD= 12V,ID= 120A, VGS= 10V Qgd Total gate charge Gate-source charge Gate-drain charge RG Gate input resistance f=1 MHz Gate DC Bias = 0 Test signal level = 20mV open drain Qgs Unit V Zero gate voltage drain current (VGS = 0) Symbol Max. 24 IDSS Table 6. 4/14 On/off states (see Figure 14) Min. Typ. Max. Unit 7055 3251 307 pF pF pF 109.4 30.2 26.4 nC nC nC 4.4 Ω STB300NH02L - STP300NH02L Table 7. Symbol td(on) tr td(off) tf Table 8. Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Parameter ISD Source-drain current Source-drain current (pulsed) VSD (1) trr Qrr IRRM trr Qrr IRRM Test conditions Min. VDD = 10V, ID = 60A RG= 4.7Ω, VGS= 10V, (see Figure 13) VDD = 10V, ID = 60A RG= 4.7Ω, VGS= 10V, (see Figure 13) Typ. Max. Unit 18 275 ns ns 138 94.4 ns ns Source drain diode Symbol ISD Electrical characteristics Test conditions Forward on voltage ISD = 120 A, VGS = 0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 120A, VDD = 20V, Reverse recovery time Reverse recovery charge Reverse recovery current di/dt = 100A/µs Tj = 25°C (see Figure 18) ISD =120A, VDD = 20V di/dt = 100A/µs Tj = 150°C (see Figure 18) Min Typ. Max Unit 120 640 A A 1.3 V 63 85 2.7 ns nC A 63.2 88 2.8 ns nC A 1. Pulsed: pulse duration = 300µs, duty cycle 1.5% 5/14 Electrical characteristics STB300NH02L - STP300NH02L 2.1 Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Static drain-source on resistance Figure 7. Normalized BVDSS vs temperature 6/14 STB300NH02L - STP300NH02L Figure 8. Electrical characteristics Gate charge vs gate-source voltage Figure 9. Figure 10. Normalized gate threshold voltage vs temperature Capacitance variations Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics 7/14 Test circuit 3 STB300NH02L - STP300NH02L Test circuit Figure 13. Switching times test circuit for resistive load Figure 14. Gate charge test circuit Figure 15. Test circuit for inductive load Figure 16. Unclamped inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform 8/14 Figure 18. Switching time waveform STB300NH02L - STP300NH02L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/14 Package mechanical data STB300NH02L - STP300NH02L TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 10/14 Typ 4.40 0.61 1.14 0.49 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STB300NH02L - STP300NH02L Package mechanical data D²PAK mechanical data mm inch Dim Min A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 Typ 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 Max Min 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 10.4 0.393 8 10 0.409 0.334 5.28 15.85 1.4 1.75 3.2 0.4 0° Max 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 0.315 8.5 4.88 15 1.27 1.4 2.4 Typ 0.192 0.590 0.50 0.055 0.094 0.208 0.625 0.55 0.68 0.126 0.015 4° 11/14 Packaging mechanical data 5 STB300NH02L - STP300NH02L Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 12/14 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB300NH02L - STP300NH02L 6 Revision history Revision history Table 9. Document revision history Date Revision Changes 21-Feb-2007 1 First release 25-Sep-2007 2 Corrected value on Avalanche characteristics 13/14 STB300NH02L - STP300NH02L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14