POWER INDUCTORS <SMD Type: CEP Series> Type: CEP127 Product Description ・12.9×12.9mm Max. (L×W), 8.0mm Max. height ・Inductance range: 10μH ・Rated Current Range: 7.6A ◆ Feature ・Magnetically shielded construction. ・Super high current, Mn-Zn core used, Flat wire used. ・Ideally used in computer CPU power supply. ・RoHS Compliance ◆ Dimensions (mm) MAX.8.0 ◆ Land Pattern (mm) 2.5±0.2 ② 7.0±0.2 2.6±0.2 4.0±0.2 4.2±0.2 2.6±0.2 100 Date Code CN 12.5±0.4 12.5±0.4 ③ ① ◆Schematics (Bottom) 13.5 4.0 4.2 ② 3.0 4.0 10.0 ③ ① ◆ Specification PARAMETER CONDITIONS UNITS specification Inductance (OCL) Inductance Decrease △L/Lo D.C Resistance 100kHz, 0.1 V, ( 1-2 ) 0ADC uH 10±20% 100kHz, 0.1 V, ( 1-2 ) 10.1ADC ―― 20% Max. ( 1-2 ) 100VDC (Winding to Core ) 120 VDC, 0.5mA 2Sec (Winding to Core ) mΩ 15 Max MΩ 100 Min ―― ―― A 7.6 Insulation Resistance Dielectric Breakdown Isolation Rated Current ※1 ※1 Rated current: The DC current at which the inductance decreases to 80% of it's nominal value or when △t=40℃, whichever is lower(Ta=20℃). Please refer to the sales offices on our website for a representative near you www.sumida.com 1/1