SMD POWER INDUCTORS SDB1204 SERIES 1. PART NO. EXPRESSION : SDB12043R3MZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 3R3 = 3.3uH (f) F : Lead Free 2. CONFIGURATION & DIMENSIONS : B C E F I I D H 101 A G PCB Pattern Unit:m/m A B C D E F G H I 12.5±0.3 12.5±0.3 4.60 Max. 5.0±0.2 2.2±0.2 7.6±0.2 7.0 Ref. 5.4 Ref. 2.8 Ref. 3. SCHEMATIC : 4. MATERIALS : (a) Core : DR Ferrite Core h a d g (b) Core : SI Ferrite Core b (c) Base : LCP (d) Wire : Enamelled Copper Wire e (e) Tape : Mylar Tape (f) Terminal : Tinned Copper Wire f c (g) Adhesive : Epoxy (h) Ink : Bon Margue 5. GENERAL SPECIFICATION : a) Temp. rise : 40°C Max. b) Rated current : Base on temp. rise & ǻL/L0A = 20% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +80°C e) Resistance to solder heat : 260°C.10secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS SDB1204 SERIES 6. ELECTRICAL CHARACTERISTICS : Part No. Inductance ( µH ) Test Frequency ( Hz ) RDC ( mȍ ) Max. IDC (A) Max. SDB12043R3MZF 3.3±20% 1V / 100K 15 6.50 SDB12044R7MZF 4.7±20% 1V / 100K 18 5.70 SDB12046R8MZF 6.8±20% 1V / 100K 23 4.90 SDB1204100MZF 10.0±20% 1V / 100K 28 4.50 SDB1204120MZF 12.0±20% 1V / 100K 38 4.00 SDB1204150MZF 15.0±20% 1V / 100K 52 3.20 SDB1204180MZF 18.0±20% 1V / 100K 60 3.10 SDB1204220MZF 22.0±20% 1V / 100K 70 2.90 SDB1204270MZF 27.0±20% 1V / 100K 80 2.80 SDB1204330MZF 33.0±20% 1V / 100K 97 2.70 SDB1204390MZF 39.0±20% 1V / 100K 132 2.10 SDB1204470MZF 47.0±20% 1V / 100K 150 1.90 SDB1204560MZF 56.0±20% 1V / 100K 190 1.80 SDB1204680MZF 68.0±20% 1V / 100K 220 1.50 SDB1204820MZF 82.0±20% 1V / 100K 260 1.30 SDB1204101MZF 100.0±20% 1V / 100K 308 1.20 SDB1204121MZF 120.0±20% 1V / 100K 380 1.10 SDB1204151MZF 150.0±20% 1V / 100K 520 0.95 SDB1204181MZF 180.0±20% 1V / 100K 600 0.85 SDB1204221MZF 220.0±20% 1V / 100K 700 0.80 SDB1204271MZF 270.0±20% 1V / 100K 860 0.60 SDB1204331MZF 330.0±20% 1V / 100K 980 0.50 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS SDB1204 SERIES 7. CHARACTERISTICS CURVES : @ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE 90 331M 80 101M 100M 330M 4R7M 70 60 50 ǻt (°C) 40 30 20 10 0 0 1 2 3 4 5 6 7 8 9 DC CURRENT (A) @ INDUCTANCE VS. FREQUENCY RESPONSE CURVE @ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE 103 103 5 L (uH) 5 3 331M 3 331M 102 101M 102 101M 5 L (uH) 330M 3 1 10 100M 5 4R7M 3 100 10-3 330M 3 1 10 100M 5 5 4R7M 3 3 5 10-2 3 5 10-1 3 5 100 3 5 101 3 5 102 100 10-3 3 5 FREQUENCY(MHZ) 10-2 3 5 10-1 3 5 100 3 5 101 3 5 102 DC CURRENT (A) NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS SDB1204 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D P:16 m/m 101 4 m/m 101 101 101 101 ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-24 330 21±0.8 13±0.5 24 26 N +0 50 T -0 30.4 ( 3 ) Q'TY & G.W. PER PACKAGE OUTER : CARTON INNER : REEL SERIES SDB1204 Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 600 1900 13-24 2400 11.1 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS SDB1204 SERIES 9. RELIABILTY AND TEST CONDITION : TEST ITEM SOLDERABILITY SPECIFICATION TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5 SMD POWER INDUCTORS SDB1204 SERIES 10. UL CARD : GUANGDONG CHINA Mtl Dsg BC Coating Type ANSI Type __ TC __ __ __ TI E54705 (M) H D RTI Min UL94 Elec Mech H H V 4 C w/o A T Thk Flame with W 9 T R mm Class Imp 5 I Mtl Dsg Col Imp I I Liquid crystal plyester (LCP), designated "EKONOL" or "SUMIKASUPER", furnished in the form of pellets, (Contd) E4008 , E400X E4008 NC , BK NC , WT , BK E4010 E400(Y)L , E4008L E4810 NC , BK NC , BK NC , BK 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 0.30 0.75 1.5 3.0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 94V-0 130 130 130 130 130 220 220 220 130 220 220 220 130 130 130 130 130 130 130 130 130 130 130 130 130 180 200 200 130 180 200 200 130 130 130 130 130 130 130 130 130 130 130 130 130 220 240 240 130 220 240 240 130 130 130 130 130 130 130 130 ___ ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 3 2 1 ___ 4 4 4 ___ 0 0 1 4 4 4 ___ ___ ___ ___ ___ ___ ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 ___ ___ ___ 5 ___ ___ ___ 4 ___ ___ ___ 0 5 4 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 6 SMD POWER INDUCTORS SDB1204 SERIES 10. UL CARD : E56086 (S) TERAOKA SEISAKUSHO CO LTD 4-22 1-CHOME HIROMACHI SHINAGAWA-KU, TOKYO JAPAN Flame returdant aramid paper tape, Cat. Nos. 512F+, 560F+, 565S+, 681S+. Flame returdant aramid paper tape, Cat. Nos. 560S+, 561S+, 562S+, rated 200 C. Flame returdant acetate cloth tape, Cat. Nos. 570F+, 571F+, 573F+. Flame returdant polyester film tape, Cat. Nos. 680F+, 684F. Flame returdant glass cloth tape, Cat. Nos. 510F+, 540S+, 541F+, 685S+. Flame returdant glass cloth tape, Cat. No. 54S, rated 200 C. Flame returdant cotton cloth tape, Cat. Nos. 590F+, 715F+. Flame returdant polyimide film tape, Cat. No. 650S+, rated 200 C. Flame returdant tellon tape, Cat. Nos. 841+, 846+. Flame returdant PVC tape, Cat. Nos. 305F+, 307F+, 380F+. Flame returdant polyester fiber tape, Cat. Nos. 511F+, 551F+. Flame returdant epoxy varnish impregnated polyester web tape, Cat. Nos. 530F+. Flame returdant epoxy varnish impregnated glass paper tape, Cat. No. 531F+. Flame returdant copper foil tape, Cat. No. 831S+. Flame returdant copper foil tape, Cat. No. 8321+. Flame returdant alumlnum foil tape, Cat. Nos. 833+, 834+. Epoxy varnish impregnated polyester non-woven fabric tape, cat. no. 530F°rated 150 C. polyester film tape, Cat. Nos. 631S°, 632S, rated 130 C. Flame returdant polyester film tape, Cat. No. 630F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber tape Cat. No. 673F°, rated 130 C. Flame returdant polyester film/epoxy varnish impregnated polyester fiber/polyester film tape, Cat. No. 850F°, rated 130 C. + - Subjected to Flame Retardant tests only. °- Complies with Flame Retardent requirements when so marked. Mraking: Company name or "E56086" and catalog designation and "Flame Retardent" if applice, bie. brinted on the central paper or outer package. ( A card ) R D11/0114874 51 NOTE : Specifications subject to change without notice. Please check our website for latest information. 07.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 7