TAK CHEONG SEM IC O N DU C TO R 500 mW DO-35 Hermetically Sealed Glass Zener Voltage Regulators Absolute Maximum Ratings AXIAL LEAD DO35 TA = 25°C unless otherwise noted Parameter Value Units 500 mW -65 to +200 °C +200 °C Power Dissipation Storage Temperature Range Operating Junction Temperature DEVICE MARKING DIAGRAM L xx xx T L : Logo Device Code : TC1NxxxxT Tolerance (T) : A = 10% : B = 5% : C = 2% : D = 1% These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: Zener Voltage Range 2.4 to 75 Volts DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Cathode Anode Compression Bonded Construction All external surfaces are corrosion resistant and leads are readily solderable ELECTRICAL SYMBOL RoHS Compliant Solder Hot Dip Tin (Sn) Lead Finish Cathode Indicated By Polarity Band Electrical Characteristics TA = 25°C unless otherwise noted Zener Voltage Device TC1N5985B TC1N5986B TC1N5987B TC1N5988B TC1N5989B TC1N5990B TC1N5991B TC1N5992B TC1N5993B TC1N5994B TC1N5995B TC1N5996B TC1N5997B TC1N5998B TC1N5999B TC1N6000B TC1N6001B VZ (Volts) Zener Impedance Leakage Current @ IZT ZZT @ IZT Min Nom Max (mA) (Ω) (Ω) ZZK @ IZK (mA) (µA) IR @ VR (Volts) 2.280 2.565 2.850 3.135 3.420 3.705 4.085 4.465 4.845 5.320 5.890 6.460 7.125 7.790 8.645 9.50 10.45 2.4 2.7 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 2.520 2.835 3.150 3.465 3.780 4.095 4.515 4.935 5.355 5.880 6.510 7.140 7.875 8.610 9.555 10.50 11.55 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 100 100 95 95 90 90 88 70 50 25 10 8 7 7 10 15 18 1800 1900 2000 2200 2300 2400 2500 2200 2050 1800 1300 750 600 600 600 600 600 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 75 50 25 15 10 5 3 2 2 1 1 0.5 0.5 0.1 0.1 0.1 1 1 1 1 1 1 1 1.5 2 3 4 5.2 6 6.5 7 8 8.4 November 2006 / B Page 1 TC1N5985B through TC1N6021B ® ® TAK CHEONG SEM IC O N DU C TO R Electrical Characteristics TA = 25°C unless otherwise noted Zener Voltage Device TC1N6002B TC1N6003B TC1N6004B TC1N6005B TC1N6006B TC1N6007B TC1N6008B TC1N6009B TC1N6010B TC1N6011B TC1N6012B TC1N6013B TC1N6014B TC1N6015B TC1N6016B TC1N6017B TC1N6018B TC1N6019B TC1N6020B TC1N6021B VZ (Volts) Zener Impedance @ IZT ZZT @ IZT Leakage Current ZZK @ IZK IR @ VR Min Nom Max (mA) (Ω) (Ω) (mA) (µA) (Volts) 11.40 12.35 14.25 15.20 17.10 19.00 20.90 22.80 25.65 28.50 31.35 34.20 37.05 40.85 44.65 48.45 53.20 58.90 64.60 71.25 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 12.60 13.65 15.75 16.80 18.90 21.00 23.10 25.20 28.35 31.50 34.65 37.80 40.95 45.15 49.35 53.55 58.80 65.10 71.40 78.75 5 5 5 5 5 5 5 5 5 5 5 5 2 2 2 2 2 2 2 2 22 25 32 36 42 48 55 62 70 78 88 95 130 150 170 180 200 225 240 265 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1300 1400 1400 1600 1700 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 9.1 9.9 11 12 14 15 17 18 21 23 25 27 30 33 36 39 43 47 52 56 Notes: 1. TOLERANCE AND VOLTAGE DESIGNATION The type numbers listed have zener voltage as shown and have a standard tolerance on the nominal zener voltage of ±5%. Suffix A = ±10%, C = ±2% and D = ±1%. 2. SPECIALS AVAILABLE INCLUDE Nominal zener voltages between the voltages shown and tighter voltage, for detailed information on price, availability and delivery, contact you nearest Tak Cheong representative. 3. ZENER VOLTAGE (VZ) MEASUREMENT The zener voltage (VZ) is tested under pulse conditions such that TJ is no more than 2℃ above TA. 4. ZENER IMPEDANCE (ZZ) DERIVATION Zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an RMS value equal to 10% of the dc zener current (IZT) is superimposed to IZT . November 2006 / B Page 2 ® TAK CHEONG SEM IC O N DU C TO R Package Outline Package Case Outline DO-35 DO-35 DIM Millimeters Inches Min Max Min Max A 0.46 0.55 0.018 0.022 B 3.05 5.08 0.120 0.200 C 25.40 38.10 1.000 1.500 D 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. This datasheet presents technical data of Tak Cheong’s Zener Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. November 2006 / B Page 3