AME ATXP6

AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n General Description
ATXP6 is a full feature of over clocking device for Intel©
CPU. It integrates all functions that are possible to be
utilized for over-clocking purpose.
n Features
l
Provide Six VID Input (VIDIN0-5) and Six VID Output
(VIDOUT0-5) Pins
l
Support Auto-Recover
Build-in Watch Dog Timer & Reset Output Signal Pin
l
Provide Eight GPIO Pins
l
SM Bus Interface
l
Provide CPU Changing Detect Pin (SLOTOCC#)
l
Package: SSOP 28-Pin
Rev. A.01
1
AME, Inc.
Jumper Free Over Clock Controller
ATXP6
n Pin Configuration
2
3VSB
1
28
Test/ASEL
GPIO3
2
27
GPIO5
GPIO4
3
26
GPIO6
VIDIN0
4
25
GPIO7
VIDIN1
5
24
VIDOUT 0
VIDIN2
6
23
VIDOUT 1
VIDIN3
7
22
VIDOUT 2
VIDIN4
8
21
VIDOUT 3
VIDIN5
9
20
VIDOUT 4
GPIO0
10
19
VIDOUT 5
GPIO1
11
18
VBAT
GPIO2
12
17
SLOTOCC#
SDA
13
16
GND
SCL
14
15
RSTOUT #
A
T
X
P
6
Rev. A.01
AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n Pin Description
I/O Type Description
INtx
---- Special level input.
INtx-100k-dn ---- Special level input with 100K ohm pull-down resistor.
INt
---- TTL level input.
INt-47k-up ---- TTL level input with 47K ohm pull-up resistor.
INts
---- TTL level input with Schmitt-tigger.
INts-27
---- TTL level input with Schmitt-tigger and 27 n sec. glitch elimination.
OD12
---- Open-drain with 12mA sink current.
O12 ---- Output buffer with 12mA drive/sink current
I/OD12
---- TTL level bi-directional pin, and open-drain output with 12mA sink current.
I/O12 ---- TTL level bi-directional pin, and output with 12mA drive/sink current.
I/O12-10k-up ---- TTL level bi-directional pin, and output with 12mA drive/sink current and
10K ohm pull-up resistor.
Pin No.
Pin name
I/O Type
Function
1
3VSB
POWER
Power Pin
2
GPIO3
I/O12
General Purpose I/O Pin, Default O/D
3
GPIO4
I/O12
General Purpose I/O Pin, Default O/D
4
VIDIN0
INtx
Receive VID0 Signal from CPU
5
VIDIN1
INtx
Receive VID1 Signal from CPU
6
VIDIN2
INtx
Receive VID2 Signal from CPU
7
VIDIN3
INtx
Receive VID3 Signal from CPU
8
VIDIN4
INtx
Receive VID4 Signal from CPU
9
VIDIN5
INtx-100k-dn
Receive VID5 Signal from CPU
10
GPIO0
I/O12
General Purpose I/O Pin, Default O/D
11
GPIO1
I/O12
General Purpose I/O Pin, Default O/D
12
GPIO2
I/O12
General Purpose I/O Pin, Default O/D
Rev. A.01
3
AME, Inc.
Jumper Free Over Clock Controller
ATXP6
n Pin Description
Pin No.
Pin Name
I/O Type
Function Description
13
SDA
I/OD 12
SMB Data Signal
14
SCL
INts
SMB Clock Signal
15
RSTOUT#
OD12
16
GND
GND
GROUND Pin
17
SLOTOCC#
INts-27
Receive SLOTOCC#From CPU
18
VBAT
POWER
19
VIDOUT5
OD12
VID5 Signal Output Pin to PWM
20
VIDOUT4
OD12
VID4 Signal Output Pin to PWM
21
VIDOUT3
OD12
VID3 Signal Output Pin to PWM
22
VIDOUT2
OD12
VID2 Signal Output Pin to PWM
23
VIDOUT1
OD12
VID1 Signal Output Pin to PWM
24
VIDOUT0
OD12
VID0 Signal Output Pin to PWM
25
GPIO7
I/O12
General Purpose I/O Pin, Default O/D
26
GPIO6
I/O12
General Purpose I/O Pin, Default O/D
27
GPIO5
I/O12
General Purpose I/O Pin, Default O/D
28
Test/ASEL
INt-47k-up
Power Pin
Address Select Pin
Table1. Pin Description Table
4
Rev. A.01
AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n Electrical Characteristics
AC Specifications
Symbol
Parameter
Limits
Min
Max
100
Units
FSMB
SMBus Operating Frequency
10
TBUF
Bus free time between Stop and Start Condition
4.7
µs
THD:STA
Hold time after (Repeated) Start Condition.
After this period,the first clock is generated
4.0
µs
TSU:STA
Repeated Start Condition setup time
4.7
µs
TSU:STO
Stop Condition setup time
4.0
µs
THD:DAT
Data hold time
300
ns
TSU:DAT
Data setup time
250
ns
TTIMEOUT
Clock low time-out
25
TLOW
Clock low period
4.7
THIGH
Clock high period
4.0
35
KHZ
ms
µs
50
µs
TLOW:SEXT
Cumulative clock low extend time (slave device)
25
ms
TLOW:MEXT
Cumulative clock low extend time (master
device)
10
ms
TF
Clock/Data Fall Time
300
ns
TR
Clock/Data Rise Time
1000
ns
Rev. A.01
5
AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n Electrical Characteristics
Timing Measurements
6
Rev. A.01
AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n DC Specifications
Electrical Characteristics of other pins
symbol
VBAT
Description
Power
Min.
4.5
Typ.
5
Max.
5.5
Unit
V
3VSB
Power
3
3.3
3.6
V
ViL
Input Low voltage
-
-
0.8
V
ViH
Input High voltage
2.2
-
-
V
VoL
Output Low voltage
-
-
0.4
V
VoH
Output High voltage
2.4
-
-
V
IoL
Output Low current
-
12
-
mA
n Ordering Information
Rev. A.01
Part Number
Package
Special Feature
ATXP6
SSOP-28
Commercial Standard
ATXP6G
SSOP-28
Green Device with Commercial Standard
7
AME, Inc.
Jumper Free Over Clock Controller
ATXP6
n Package Information
SSOP-28
D
L1
?2
E1
E
0.25MM
?1
R1
R
GAUGE PLANE
L
?
Detail A
h x 45 °
ZD
A2
C
e
B
SYMBOLS
MILLIMETERS
INCHES
MIN
MAX
MIN
MAX
A
1.35
1.75
0.053
0.069
A1
0.10
0.25
0.004
0.010
A2
-
1.50
-
0.059
b
0.20
0.30
0.008
0.012
D
9.80
10.00
0.386
0.394
E1
3.81
4.00
0.150
0.157
e
E
h
L
Π
8
DTEAIL A
A1
0.10MM
A
c
0.635BASIC
5.80
6.20
0.380BASIC
0.41
o
0
1.27
o
8
0.025BASIC
0.228
0.244
0.015BASIC
0.016
o
0
0.500
8o
Rev. A.01
AME, Inc.
ATXP6
Jumper Free Over Clock Controller
n Tape and Reel Dimension
SSOP-28
Rev. A.01
Package
Carrier Width (W)
Pitch (P)
Part Per Full Reel
Reel Size
SSOP-28
16.0±0.1 mm
4.0±0.1 mm
2500pcs
330±1 mm
9
www.ame.com.tw
E-Mail: sales@ame.com.tw
Life Support Policy:
These products of AME, Inc. are not authorized for use as critical components in life-support
devices or systems, without the express written approval of the president
of AME, Inc.
AME, Inc. reserves the right to make changes in the circuitry and specifications of its devices and
advises its customers to obtain the latest version of relevant information.
 AME, Inc. , September 2007
Document: ATT-DSATXP6-A.01
Corporate Headquarter
U.S.A. (Subsidiary)
AME, Inc.
Analog Microelectronics, Inc.
2F, 302 Rui-Guang Road, Nei-Hu District
Taipei 114, Taiwan.
Tel: 886 2 2627-8687
Fax: 886 2 2659-2989
3100 De La Cruz Blvd., Suite 201
Santa Clara, CA. 95054-2438
Tel : (408) 988-2388
Fax: (408) 988-2489