TSC 6A10G

CURRENT 6.0 Amperes
VOLTAGE 50 to 1000 Volts
6A05G THRU 6A100G
Features
· The plastic package carries Underwrites Laboratory
Flammability Classification 94V-0
· High current capability
· Low reverse leakage
· Glass passivated junction
· Low forward voltage drop
· High temperature soldering guaranteed : 350℃/10 seconds,
0.375"(9.5mm) lead length, 5 lbs, (2.3kg) tension
P-6
0.360(9.1)
0.340(8.6)
DIA.
1.0(25.4)
MIN.
0.360(9.1)
0.340(8.6)
Mechanical Data
· Case : P-6 molded plastic body
· Terminals : Lead solderable per MIL-STD-750,
method 2026
· Polarity : Color band denotes cathode end
· Mounting Position : Any
· Weight : 0.007 ounce, 2.1 gram
1.0(25.4)
MIN.
0.052(1.3)
0.048(1.2)
DIA.
Dimensions in inches and (millimeters)
Maximum Ratings And Electrical Characteristics
(Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive
load. For capacitive load, derate by 20%)
Symbols
6A05G
6A10G
6A20G
6A40G
6A60G
6A80G
6A100G
Units
Maximum recurrent peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward rectified current
0.375"(9.5mm) lead length (see Fig.1)
I(AV)
6.0
Amps
Peak forward surge current 8.3ms half sine
wave superimposed on rated load
(JEDEC method)
IFSM
400.0
Amps
Maximum instantaneous forward voltage
at 6.0A
VF
1.1
Volts
Maximum reverse current
at rated DC blocking voltage
IR
10.0
μA
TA=25℃
TA=100℃
Typical thermal resistance (Note 2)
Typical junction capacitance (Note 1)
Operating and storage temperature range
100.0
RθJA
20.0
RθJL
4.0
CJ
150
pF
TJ
TSTG
-50 to +175
℃
Notes:
(1) Measured at 1MHz and applied reverse voltage of 4.0V DC.
(2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted
with 1.1×1.1"(30×30mm) copper pads.
℃/W
RATINGS AND CHARACTERISTIC CURVES 6A05G-6A100G
FIG.1-FORWARD CURRENT DERATING CURVE
FIG.2-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
5
1000
4
3
INSTANTANEOUS FORWARD CURRENT(AMPERES)
AVERAGE FORWARD CURRENT AMPERES
6
Ground pane 1" X 1"
copper surface area PC
BOARD Recommended
PC Board Mounting
PC Board
2
Slandard PC Board
mounting
1
0
0
20
40
60
80
100
120
140
160
180
200
LEAD TEMPERATURE ( ℃)
FIG.3-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
100
10
TJ=25℃
PULSE WIDTH=300mS
1
1% DUTY CYCLE
0.1
0.6
600
PEAK FORWARD SURGE
CURRENT (AMPERES)
500
1.0
1.2
1.4
1.6
1.8
2.0
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
400
300
FIG.4-TYPICAL REVERSE CHARACTERISTICS
200
100
100
0
10
NUMBER OF CYCLES AT 60Hz
100
INSTANTANEOUS REVERSE CURRENT (mA)
1
FIG.5-TYPICAL THERMAL RESISTANCE VS LEAD
LENGTH
30
THERMAL RESISTANCE (℃/W)
0.8
25
20
10
TJ=100℃
1.0
TJ=25℃
0.1
15
10
0.01
0
20
40
60
80
100
5
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
EQUAL LEAD LENGHT TO HEAT SINK,(IN.)
0.8
0.9
1.0
120
140