WJ102 Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 FEATURES: • High sensitivity • Super light weight • Low coil power consumption • PC board mounting • Ideal for high density mounting E197851 15.5 x 10.5 x 11.5 mm CONTACT DATA Contact Arrangement Contact Rating Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 1A & 3A @ 125VAC, 30VDC 5A @ 125VAC, 30VDC 270VA, 120VAC < 50 milliohms initial AgNi + Au 150W 300VAC, 150VDC 5A COIL DATA Coil Voltage VDC Rated Max. 3 5 6 9 12 24 3.9 6.5 7.8 11.7 15.6 31.2 Coil Resistance Ω ± 10% .20W 45 125 180 405 720 2880 .36W 25 75 100 225 400 1600 .45W 20 56 80 180 320 1280 Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 10% of rated voltage 2.25 3.75 4.50 6.75 9.00 18.00 0.3 0.5 0.6 0.9 1.2 2.4 Coil Power W Operate Time ms Release Time ms .20 .36 .45 5 5 CAUTION: 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2. Pickup and release voltages are for test purposes only and are not to be used as design criteria. GENERAL DATA Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 100MΩ min @ 500VDC 1250V rms min. @ sea level 500V rms min. @ sea level 100m/s2 for 11ms 1.50mm double amplitude 10-40Hz 5N -40 °C to + 85 °C -40 °C to + 155 °C 230 °C ± 2 °C for 10 ± 0.5s 3.5g WJ102 Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 ORDERING INFORMATION 1. Series: WJ102 (6 pin configuration) STD WJ102K (5 pin configuration) 2.Contact Arrangement: 1A = SPST N.O. 1B = SPST N.C. 1C = SPDT 3. Sealing Options: S = Sealed 4: Contact Options: 1 = 1 Amp (Requires .2, .36, or .45 Watt coil) 3 = 3 Amp (Requires .2, .36, or .45 Watt coil) 5 = 5 Amp (Requires .45 Watt coil) 5. Coil Voltage: 3VDC 5VDC 6VDC 9VDC 12VDC 24VDC 6. Coil Power: .20 = .20W .36 = .36W .45 = .45W WJ102 1C S 3 12VDC DIMENSIONS (Units = mm) SCHEMATICS & PC LAYOUTS (BOTTOM VIEWS) WJ102 1A 1B 1C 1A 1B 1C WJ102K .45