DESCRIPTION AND FEATURES All dimensions in inches. Features: • Dual block mounting allows 2 LEDs in same board area. • Single block mounting-height and spacing alignment, saves assembly cost. • Super Brite LEDs, high light output, diffused lens. • Low current, only 2 mA needed. • Built-in resistor chip operates off 5 volt supply without external resistor. • Standoffs prevent flux entrapment. 5670 Series T-1 3/4 Right Angle 2 High LED Assembly 5670 Series T-1 3/4 Right Angle 2 High LED Assembly Housing: Black Nylon, UL94V-O Alternate LEDs are also available in this package as a standard variation. Mounting hole pattern on page 1-X6. ELECTRO-OPTICAL CHARACTERISTICS AND RATINGS Part Number 5670H1;1 5670H3;3 5670H5;5 5670H7;7 LED Color Red Green Yellow Red Amber Green Red Amber Green Yellow Emitted Color Red/Red Amber/Amber Green/Green Yellow/Yellow LED Code 1LC 5LC 7LC 1-5V 3-5V 5-5V 1 3 5 7 Typical Intensity (mcd) 6.3 10.0 10.0 6.3 Rated Current (mA) 10 10 10 10 Typical Intensity (mcd) Rated Current (mA) 2.3 2.3 2.1 8.0 8.0 8.0 6.3 10 10 6.3 2.0 2.0 2.0 10.0 10.0 12.0 10.0 10.0 10.0 10.0 Continuous Forward Current Max. (mA) Typ. (V) Max. (V) 35 35 35 35 60 60 60 60 3.0 3.0 3.0 3.0 Forward Current Max. (mA) Forward Voltage Forward Voltage Typ. (V) Max. (V) 7 7 7 15 15 15 60 60 1.8 1.8 1.9 5.0 5.0 5.0 2.0 2.0 2.2 2.2 2.7 7.5 7.5 7.5 3.0 3.0 60 60 2.2 2.1 3.0 3.0 America: CML Innovative Technologies,Inc. 147 Central Avenue Hackensack -NJ 07601 -USA Tel:1-201-489 -8989 Fax:1-201-489 -6911 e-mail:[email protected] Reverse Breakdown Voltage Min.(V) Peak Wavelength (nm) 5 5 5 5 650 608 563 585 Reverse Breakdown Voltage Min. (V) Peak Wavelength (nm) 5 5 5 5 5 5 5 5 5 5 Peak Forward Current @ 1ms-300pps (A) 1.0 1.0 .09 1.0 635 565 583 635 583 565 650 608 563 585 Europe: CML Technologies GmbH &Co.KG Robert-Bunsen-Str.1 67098 Bad Dürkheim -GERMANY Tel:+49 (0)6322 9567-0 Fax:+49 (0)6322 9567-88 e-mail:[email protected] Asia: CML Innovative Technologies,Inc. 61 Aida Street Singapore 459975 Tel:(65)9630 -5003 e-mail:[email protected] CML-IT reserves the right to make specification revisions that enhance the design and/or performance of the product