4117-2 Patent No. 95319882.0 29.6×18×20 Features Twin structure of 4117 type. Small size, light weight. Low coil power consumption. PC board mounting. Ordering Information 4117-2 2C S 12VDC 1 2 3 4 1 Part number：4117-2 2 Contact arrangement：2A:2A；2C:2C； 2U:2U；2W:2W 3 Enclosure：S: Sealed type；Z: Dust cover 4 Coil rated Voltage(V)：DC:3,5,6,9,12,18,24 Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation Electrical life Mechanical 2ADPSTNO 2CDPDT(B-M) 2UDPSTNODM 2WDPDTNC-NO AgNi AgSnO2 AgCdO 2A2C: 10A/120VAC,28VDC ; 2U2W: 2×10A/120VAC, 28VDC 280W 1200VA 75VDC 380VAC Max. Switching Current:10A አ50m Item 3.12 of IEC255-7 105 Item 3.30 of IEC255-7 107 Item 3.31 of IEC255-7 Coil Parameter Dash numbers Coil voltage VDC Coil resistance ±10% Pickup voltage VDC(max) (75%of rated voltage ) release voltage VDC(min) (10% of rated voltage) Rated Max. 003-1000 3 3.9 92 2.25 0.3 005-1000 5 6.5 252 3.75 0.5 006-1000 6 7.8 362 4.50 0.6 009-1000 9 11.7 852 6.75 0.9 012-1000 12 15.6 145 2 9.00 1.2 018-1000 18 23.4 3242 13.5 1.8 024-1000 24 31.2 5762 18.0 2.4 Coil power consumption W Operate Time ms Release Time ms 21.0 10 5 CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. 117 www.dblectro.com 4117-2 Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil 100M min (at 500VDC) Item 7 of IEC255-5 50Hz 750V 50Hz 1500V Item 6 Item 6 Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 100m/s2 11ms 10~40Hz double amplitude 10N 2352 30.5s -40~85 85% (at 40) 20g 1.27mm of IEC255-5 of IEC255-5 IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 IEC68-2-3Test Ca Qualification inspection: Perform the qualification test as specified in the table of IEC255-19-1 and minimum sample size 24. Dimensions (Unit: mm) Dimensions Mounting (Bottom views) mm 0.3 1.4 2.1 2.4 3.81 4.0 5.08 8.89 10.16 18 20 29.6 Wiring diagram(Bottom views) NOTES 1).Dimensions are in millimeter. 2).Inch equivalents are given for general information only. Reference Data www.dblectro.com >àçÇá 0.012 0.055 0.083 0.094 0.150 0.157 0.200 0.350 0.400 0.709 0.787 1.165