Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com NVF9 NHG RELAYS NVF9 27.3 23 30.2(+20.3) Features Heavy contact load (30A). nsert mounting available. Suitable for automation system and automobile auxiliary etc. Operation condition Insulation Resistance Dielectric Strength Between contacts Between contact and coil 100M 50Hz 500V 50Hz 750V Item 6 of IEC255-5 Item 6 of IEC255-5 Shock resistance Vibration resistance Terminals strength Solderability Ambient Temperature Relative Humidity Mass 147m/s 2 11ms 10~60Hz double amplitude 1.5mm 8N 235 2 10 0.5s -40~85 85% (40 ) 40g IEC68-2-27 Test Ea IEC68-2-6 Test Fc IEC68-2-21 Test Ua2 IEC68-2-20 Test Ta method 1 min. (500VDC) Item 7 of IEC255-5 IEC68-2-3 Test Ca Qualification inspection: Perform the qualification test as specified in the table Ordering Information of IEC255-19-1 and minimum sample size 24. mm /inch Dimensions NVF9 A Z 30 a DC12V 3 4 5 6 A 1.035 4 Contact current 15:15A/24VDC 30:30A/14VDC 5 Terminals a: plug in type 6 Coil rated voltage(V) DC:6,12,24 0.591 0.256 Max. switching current:30A Item 3.12 of IEC 255-7 Item 3.30 of IEC 255-7 Item 3.31 of IEC 255-7 0.205 0.854 max. 1.075max. Coil Parameter 006-1440 06 0.217 0.906 0.236 0.031 0.354 Pickup voltage VDC(max) (70%of rated voltage ) Release voltage VDC(min) (10% of rated voltage) 4.2 0.6 Coil power consumption W Operate Time ms Release Time ms Max. 7.8 25 0.039 Coil resistance 10% 0.217 Coil voltage VDC Rated 0.075 Dimensions 0.433 Dash numbers A 0.472 0.126 1A 1H SPSTNO AgSnO2 , AgNi 30A/14VDC,15A/24VDC 420W 75VDC 100mV(at 30A) 10 5 5 10 6 0.039 Contact Data Contact arrangement Contact Material Contact Rating (resistive) Max. Switching Power Contact Resistance or Voltage drop Electrical Operation life Mechanical 0.858 1.998 max. 1.189max. 0.465 1 Part number NVF9 2 Contact arrangement A:1A 3 Enclosure Z: Dust cover 0.433 2 0.154 1 0.354 012-1440 12 15.6 100 8.4 1.2 024-1440 24 31.2 400 16.8 2.4 1.44 7 0.866 Mounting (Bottom view) CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. Wiring diagram (Bottom view)