SBU120 SERIES 120W Open Frame Switching Power Supplies For I.T.E. Description: The SBU120 series of compact, open frame constructed, AC/DC switching mode power supplies provide 120 Watts of continuous OUTput power . They are ideally suited for use in CRT terminals, disc drive systems, microprocess or based systems, portable equipments and many other applications, all models are designed to meet the safety requirements of UL1950/EN60950 requirements. All units are 100% burned in and tested. Features: Electrical Characteristics: Sym. Parameter Vin Fin PFC Wo Vo Io Iil Iih Input Voltage Input Frequency Power Factor Correction Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Input Current (High Line) I rl Low Line Inrush Current I rh Eff REG-i REG-o OVP OCP Ttr Thold Ts Vp-p Ilk Tc High Line Inrush Current Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Transient Response Hold-Up Time Start Up Time Ripple & Noise (Peak to Peak) Safety Ground Leakage Current Temperature Coefficient Safety Approvals : Ba Test Conditions Io=Full load, Vin=90~260VAC Vin=90 to 264 VAC Io=Full load, Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full load, Io=Full load Vin=230VAC Vin=115VAC Vin=230VAC 25 C,Cool start, US t gepr CB Product Safety Ty P e a pp r o v e Min. Typ. Max. Unit 264 90 47 63 0.95 0.97 1.0 120 0 See rating Chart See rating Chart 1.7 1.0 VAC Hz 12 15 A 26 30 A 25 C,Cool start, Vin=230VAC u d C ua r ft Wide Input Voltage 90 to 264 VAC,47 to 63 Hz Internal EMI filter Single to Triple Output Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal Output connector mates with Molex housing 09-50-3061 (or 09-50-3081, or 09-50-3131) and Molex 2878 series crimp terminal Output Voltage Available From 3 VDC Thru 50 VDC Input Surge Current, Over Voltage and Over Load protection Power Factor Correction Power Fail Detect(Optional) Class I Insulation Size: 3"x5"x1.32" Two Years Warranty W V A A A 88 1 5 112 132 110 150 Io=Full load to Half Load, Vin=100VAC 4 16 18 20 Io=Full load, Vin=110VAC Io=Full load, Vin=100VAC 1 2 0.3 Full load, Vin=90VAC 1 2 Io=Full load, Vin=240VAC 0.4 0.45 All output -0.04 0.04 % % % % % mS mS S % mA %/ C Min. Typ. Max. Unit 70 80 0.5 3 Environmental : Sym. Toper Tstg Hr Pd Parameter Te s t Conditions Operating Temperature Storage Temperature Relative Humidity Derate linearly from 100% load at 50 C to 50% load at 70 C 0 -40 5 70 85 95 C C % Safety Specifications: Sym. Parameter Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage Vpg for Primary to Ground Isolation Resistance Ri CISPR EMI requirements for CISPR-22 FCC EMI requirements for FCC PART-15 Vps Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC 50 B B M CLASS CLASS Te s t Conditions Test Voltage=500VDC Vin=220VAC Vin=110VAC DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com SBU120 SERIES 120W Open Frame Switching Power Supplies For I.T.E. Output Voltage And Current Rating Chart (Single Output) : Model Number SBU120-101 SBU120-102 SBU120-103 SBU120-104 SBU120-105 SBU120-106 SBU120-107 SBU120-108 SBU120-109 SBU120-110 SBU120-111 OUTputVoltage OUTput Current 3 5 6 9 11 13 16 21 27 33 40 22.00 22.00 19.16 13.33 10.90 9.23 7.50 5.71 4.44 3.63 3.00 ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 5 6 9 11 13 16 21 27 33 40 50 VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC VDC ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 20.00 18.33 12.77 10.90 9.23 7.50 5.71 4.44 3.63 3.00 2.40 Total Regulation Maximum OUTput Power 5% 5% 5% 4% 3% 3% 3% 2% 2% 2% 2% 100W 110W 115W 120W 120W 120W 120W 120W 120W 120W 120W A A A A A A A A A A A Output Voltage And Current Rating Chart ( Multi Output ) : Model Number Vonom +3.3V SBU120-200 +5V SBU120-201 SBU120-202 +5V SBU120-203 +5V SBU120-204 +3.3V +5V SBU120-215 +28V SBU120-219 +3.3V SBU120-300 SBU120-300-1 +3.3V SBU120-301 +5V SBU120-301-1 +5V SBU120-302 +5V SBU120-302-1 +5V SBU120-303 +5V SBU120-303-1 +5V SBU120-304 +5V SBU120-304-1 +5V SBU120-305 +5V SBU120-305-1 +5V +3.3V SBU120-306 SBU120-306-1 +3.3V +5V SBU120-307 SBU120-307-1 +5V SBU120-308 +3.3V SBU120-308-1 +3.3V Output #2 OUTput # 1 Output #3 M aximum Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax OUTput Power 6A 5% 15A 1.5A +12V 0.6A 120W 5% 120W 6A 5% 5% 1.5A +12V 0.6A 15A 6A 5% 1.5A 120W 15A +15V 0.6A 5% 5% +24V 0.35A 3.5A 15A 5% 120W 1.5A 6A 5% 1.5A +5V 15A 0.6A 79.5W 5% 2A 15A 120W 5% 1.5A -24V 0.2A 5% 5% 120W +5V 0.39A 3.92A 2A 0.2A 5% -12V 5% 120W 5% +12V 0.6A 15A 0A 0.8A 6A 5% 1.5A 120W +12V 0.6A 15A 0A 0.8A 6A 1.5A 5% +12V 5% 5% 120W +12V 0.6A 0A 0.8A 6A 15A 5% 5% 1.5A 5% -5V 120W 0A 0.8A +5V 6A 15A 5% +12V 0.6A 1.5A 5% 5% 120W +12V 0.6A 0A 0.8A 5% -12V 6A 5% 1.5A 15A 5% 0A 0.8A +12V 5% 6A +12V 0.6A 1.5A 5% 15A 5% 120W 120W 0A 0.8A 5% -15V 6A 15A 5% 5% +15V 0.6A 1.5A 15A 0.8A 120W 5% 0A 1.5A +15V 0.6A +15V 5% 6A 5% 120W +24V 0.35A 3.5A 0A 0.8A 5% -24V 15A 5% 1.5A 5% 120W +24V 0.35A 3.5A 0A 0.8A +24V 5% 15A 1.5A 5% 5% 120W +24V 0.35A 3.5A 15A 0A 0.8A 5% -12V 5% 1.5A 5% 120W +24V 0.35A 3.5A 0A 0.8A +12V 15A 1.5A 5% 5% 5% 15A 5% 0A 0.8A 5% 120W +12V 0.6A 1.5A -5V 6A 5% 15A 5% 0A 0.8A 5% 120W +12V 0.6A 1.5A +5V 6A 5% -10V +10V 0.6A 5% 15A 5% 0A 1.0A 5% 120W 1.5A 6A 15A 5% 0A 1.0A 5% 120W +10V 0.6A 1.5A +10V 6A 5% 0A 0.6A 1.0A 5% 91.5W +5V -12V 6A 1.5A 5% 15A 5% 15A 5% 0A 0.6A 1.0A 5% +5V 1.5A +12V 6A 5% 91.5W Mechanical Specifications : PIN CHART PIN MODEL 1 2 3 4 5 6 7 8 9 10 11 12 PIN 1 2 3 4 5 6 7 8 9 10 11 12 PFD PFD PFD 13 (Optional) MODEL SBU120-219-6PIN Vo1 Vo1 COM COM COM Vo2 SBU120-2XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM N/C COM COM SBU120-3XX-13PIN Vo2 Vo2 Vo1 Vo1 Vo1 Vo1 COM COM COM Vo3 COM COM Note: 13 (Optional) SBU120-1XX-6PIN OUT OUT OUT RTN RTN RTN SBU120-1XX-8PIN OUT OUT OUT OUT RTN RTN RTN RTN SBU120-1XX-13PIN OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN Vo1:Output#1 Vo2:Output#2 PFD PFD PFD Vo3:Output#3 Note: 1. Dimensions are shown in inches mm value. 2. Weight: 330~380gs approx. 3. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3061(or 09-50-3081,09-50-3131)and Molex 2878 series crimp DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com