SBR10U45SP5 10A SBR® SUPER BARRIER RECTIFIER PowerDI®5 NEW PRODUCT Features • • • • • • • Mechanical Data Designed as Bypass Diodes for Solar Panels Selectively Rated for 200ºC Maximum Junction Temperature for High Thermal Reliability Patented Super Barrier Rectifier Technology High Forward Surge Capability Ultra Low Forward Voltage Drop Excellent High Temperature Stability Lead Free Finish, RoHS Compliant (Note 2) • • ® Case: PowerDI 5 Case Material: Molded Plastic, “Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish – Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.093 grams (approximate) • • • • • LEFT PIN RIGHT PIN Top View Maximum Ratings BOTTOMSIDE HEAT SINK Note: Pins Left & Right must be electrically connected at the printed circuit board. Bottom View @TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitance load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol VRRM VRWM VRM VR(RMS) IO Value Unit 45 V 32 10 V A IFSM 275 A Symbol Value Unit RθJA RθJA 73 31 ºC/W Thermal Characteristics Characteristic Maximum Thermal Resistance Thermal Resistance Junction to Ambient (Note 3) Thermal Resistance Junction to Ambient (Note 4) VR ≤ 80% VRRM VR ≤ 50% VRRM DC Forward Mode Operating Temperature Range Storage Temperature Range Electrical Characteristics Characteristic Reverse Breakdown Voltage (Note 1) TSTG ºC ºC @TA = 25°C unless otherwise specified Symbol Min Typ Max Unit V(BR)R 45 - 0.42 0.38 0.42 0.47 0.41 V - 0.05 28.0 0.3 15 75 Forward Voltage Drop VF Leakage Current (Note 1) IR Notes: -65 to +150 ≤180 ≤200 -65 to +175 TJ V mA Test Condition IR = 0.5mA IF = 8A, TJ = 25ºC IF = 10A, TJ = 25ºC IF = 10A, TJ = 125ºC VR = 45V, TJ = 25ºC VR = 45V, TJ = 100ºC VR = 45V, TJ = 150ºC 1. Short duration pulse test used to minimize self-heating effect. 2. RoHS revision 13.2.2003. High temperature solder exemption applied, see EU Directive Annex Note 7. 3. FR-4 PCB, 2oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. 4. Polymide PCB, 2oz. Copper. Cathode pad dimensions 18.8mm x 14.4mm. Anode pad dimensions 5.6mm x 14.4mm. SBR and PowerDI are registered trademarks of Diodes Incorporated. 1 of 3 SBR10U45SP5 Document number: DS31371 Rev. 2 - 2 www.diodes.com March 2008 © Diodes Incorporated SBR10U45SP5 IF, INSTANTANEOUS FORWARD CURRENT (A) 5 PD, POWER DISSIPATION (W) 4 3.5 3 2.5 2 1.5 1 0.5 0 0 5 10 15 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 1 Forward Power Dissipation TA = 85°C 1 0.1 TA = 25°C 0.01 T A = -55°C 0.001 0.0001 0 150 300 450 600 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA = 125°C 1,000 10,000 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (uA) T A = 150°C TA = 125°C TA = 150°C 10,000 TA = 85°C 100 TA = 25°C 10 1 0.1 0.01 10 100,000 100,000 TA = -55°C f = 1MHz 1,000 100 30 0 5 10 15 20 25 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 10 1 0.1 1 10 100 VR, DC REVERSE VOLTAGE (V) Fig. 4 Total Capacitance vs. Reverse Voltage 12 IF, AVERAGE FORWARD CURRENT (A) NEW PRODUCT 4.5 100 Based on Lead Temp (T L) 10 8 Note 4 6 4 Note 3 2 0 25 50 75 100 125 150 175 TA, AMBIENT TEMPERATURE (°C) Fig. 5 Forward Current Derating Curve SBR and PowerDI are registered trademarks of Diodes Incorporated. 2 of 3 SBR10U45SP5 Document number: DS31371 Rev. 2 - 2 www.diodes.com March 2008 © Diodes Incorporated SBR10U45SP5 Ordering Information (Note 5) Part Number SBR10U45SP5-13 NEW PRODUCT Notes: Case ® PowerDI 5 Packaging 5000/Tape & Reel 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information S10U45S = Product Type Marking Code = Manufacturers’ code marking K = Factory designator YYWW = Date Code Marking YY = Last two digits of year ex: 08 for 2008 WW = Week code 01 to 52 S10U45S YYWWK Package Outline Dimensions ® D A2 b2 PowerDI 5 Dim Min Max A 1.05 1.15 A2 0.33 0.43 b1 0.80 0.99 b2 1.70 1.88 D 3.90 4.05 D2 3.05 NOM E 6.40 6.60 e 1.84 NOM E1 5.30 5.45 E2 3.55 NOM L 0.75 0.95 L1 0.50 0.65 W 1.20 1.50 All Dimensions in mm D D2 b2 A L1 L E E2 E1 W E L1 L1 e e b1 A2 b1 b1 b1 Suggested Pad Layout Z C E1 X2 X1 Y2 Dimensions Z X1 X2 Y1 Y2 C E1 Value (in mm) 6.6 1.4 3.6 0.8 4.7 3.87 0.9 Y1 IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. SBR and PowerDI are registered trademarks of Diodes Incorporated. 3 of 3 SBR10U45SP5 Document number: DS31371 Rev. 2 - 2 www.diodes.com March 2008 © Diodes Incorporated