EL32D1 Series EL32D1 • RoHS Compliant (Pb-Free) • LVDS Output Oscillators • 3.3V supply voltage • Ceramic 6-pad SMD Package • Stability to ±25ppm • Tri-State Output • Complementary Output • Available on Tape and Reel H L W 2.0 7.0 5.0 OSCILLATOR ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Differential Output Voltage (VOD) Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) VDD Magnitude Change (DVOD) Offset Voltage (VOS) Rise Time / Fall Time Duty Cycle Offset Voltage Magnitude Change (DVOS) Load Drive Capability Control Voltage (VC) Control Voltage Range (VCR) Frequency Deviation Linearity Transfer Function Modulation Bandwidth (MBW) Input Impedance (ZI) Typical Phase Noise (Fo = 155.520MHz) Logic Control/Additional Output Tri-State Input Voltage RMS Phase Jitter Accumulated Period Jitter (tacc) Period Jitter (trj) Period Jitter (trms) Period Jitter (tdj) Period Jitter (tp-p) Start Up Time MANUFACTURER CATEGORY ECLIPTEK CORP. OSCILLATOR 61.440MHz, 76.800MHz, 80.000MHz, 125.000MHz, 128.000MHz, 155.520MHz, 156.250MHz, 161.1328MHz, 167.3315MHz 0°C to 70°C -40°C to 85°C -55°C to 125°C 3.3VDC ±5% 247mV Minimum, 355mV Typical, 454mV Maximum 80mA Maximum Inclusive of all conditions: Calibration Tolerance at 25°C, ±50ppm or ±25ppm Maximum Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, 1st Year Aging, Shock, and Vibration 1.43VDC Typical, 1.6VDC Maximum 1.1VDC Typical, 0.9VDC Minimum -50mV Minimum, +50mV Maximum 1.125V Minimum, 1.20V Typical, 1.375V Maximum 20% to 80% of waveform 1 nSeconds Maximum at 50% of waveform 50 ±10(%) 50 ±5(%) 25mV Maximum Between Output and Complementary Output 100 Ohms and 10pF Test Conditions for Frequency Deviation 1.65VDC ±1.65VDC 0.0VDC to VCC +0.5VDC Inclusive of Operating Temperature Range, Supply ±75ppm Minimum Voltage Change, and Output Load Change 20%, 15%, or 10% Maximum Positive Transfer Characteristic Measured at -3dB with Contol Voltage of +1.65VDC 10kHz Minimum 50kOhms Typical at 10Hz Offset -55dBc/Hz at 100Hz Offset -90dBc/Hz at 1kHz Offset -120dBc/Hz at 10kHz Offset -140dBc/Hz at 100kHz Offset -145dBc/Hz at 1MHz Offset -148dBc/Hz Tri-State Enable High / Complementary Output VIH of 70% of VCC Minimum Enables Output No Connection Enables Output VIL of 30% of VCC Maximum Disables Outputs: High Impedance FJ = 12kHz to 20MHz 0.4pSec Typical, 1 pSec Maximum Sigma of Total Jitter Distribution 4pSec Typical, 5pSec Maximum Sigma of Random Jitter 3pSec Typical, 5pSec Maximum Sigma of Total Jitter Distribution 3pSec Typical, 5pSec Maximum Deterministic Jitter 4pSec Typical, 10pSec Maximum Peak to Peak of Jitter Distribution 27pSec Typical, 40pSec Maximum 10mSec Maximum SERIES PACKAGE VOLTAGE CLASS REV.DATE EL32D1 CERAMIC 3.3V OS3Z 10/07 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EL32D1 E E A 2 K - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=±50ppm Maximum over 0°C to +70°C E=±25ppm Maximum over 0°C to +70°C H=±50ppm Maximum over -40°C to +85°C AVAILABLE OPTIONS Blank=Bulk TR=Tape and Reel (Standard) FREQUENCY DEVIATION E=±75ppm Minimum LOGIC CONTROL / ADDITIONAL OUTPUT K=Tri-State (Enable High) / Complementary Output LINEARITY A=20% Maximum B=15% Maximum C=10% Maximum DUTY CYCLE 1=50% ±10% 2=50% ±5% FREQUENCY MECHANICAL DIMENSIONS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1: Voltage Control Pin 2: Tri-State Pin 3: Case Ground Pin 4: Output Pin 5: Complementary Output Pin 6: Supply Voltage Tolerances= +0.1 TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A B C D E 16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1 F G H J K 8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 F M N O P Q 1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN QTY/REEL 1,000 REEL L K0* R S T U V 2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Line 1: ECLIPTEK Characteristic Specification Fine Leak Test Gross Leak Test Mechanical Shock Vibration Solderability Temperature Cycling Resistance to Soldering Heat Resistance to Solvents MIL-STD-883, Method 1014, Condition A MIL-STD-883, Method 1014, Condition C MIL-STD-202, Method 213, Condition C MIL-STD-883, Method 2007, Condition A MIL-STD-883, Method 2002 MIL-STD-883, Method 1010 MIL-STD-202, Method 210 MIL-STD-202, Method 215 Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EL32D1 CERAMIC 3.3V OS3Z 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 10/07 Specifications subject to change without notice.