BYV29F Series Dual Ultrafast Plastic Rectifiers ITO-220AB PRV : 300 - 400 Volts Io : 8 Ampere 0.134(3.4)DIA. 0.113(3.0)DIA. FEATURES : 0.112(2.85) 0.100(2.55) 0.185(4.70)Max. 0.406(10.3)MAX. 0.124(3.16)Max. 0.272(6.9) 0.248(6.3) * Ideally suited for free wheeling diode power factor 0.603(15.5) 0.573(14.8) correction applications * Soft recovery characteristics 1 2 3 * Excellent high temperature switching 0.110(2.8) 0.098(2.5) 0.161(4.1)Max. 0.543(13.8) 0.512(13.2) * Glass passivated chip junction 0.055(1.4)Max. * Pb / RoHS Free 0.035(0.9)Max. 0.030(0.76)Max. MECHANICAL DATA : 0.100(2.55) * Case : Epoxy, Molded * Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds * Polarity: As marked * Mounting Position: Any * Weight : 2.24 grams (Approximately) PIN 1 PIN 3 PIN 2 Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Tc =25°C unless otherwise specified.) RATING SYMBOL BYV29F-300 BYV29F-400 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 300 400 V Maximum Working Peak Reverse Voltage VRWM 300 400 V Maximum RMS Voltage VRMS 210 280 V Maximum DC Blocking Voltage VDC 300 400 V Maximum Average Forward Current, Tc = 100°C IF(AV) 8.0 A IFSM 110 A VF 1.25 V Maximum Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Instantaneous Forward Voltage per Leg at IF = 8 A, Tj = 25°C IF = 8 A, Tj = 150°C 1.03 IF = 20 A, Tj = 25°C 1.40 Maximum Reverse Current per Leg IR 10 (Tc = 25°C) µA at Working Peak Reverse Voltage IR(H) 350 (Tc = 100°C) µA Trr 35 ns RθJC 5.5 °C/W TJ, TSTG - 40 to + 150 °C Maximum Reverse Recovery Time per Leg (IF = 0.5A, IR = 1.0A, Irr = 0.25A ) Maximum Thermal Resistance, Junction to Case Operating storage and temperature range Page 1 of 2 Rev. 02 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( BYV29F Series ) FIG.1 - MAXIMUM FORWARD CURRENT DERATING CURRENT FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 Tj =150 °C Resistive or Inductive Load PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 12 10 8 6 4 100 75 50 25 2 0 8.3ms SINGLE HALF SINE-WAVE (JEDEC) Method 125 0 25 50 75 100 125 150 0 175 1 2 CASE TEMPERATURE, ( °C) FIG.3 - TYPICAL INSTANTANEOUS 20 40 60 100 1000 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 CHARACTERISTICS 100 10 1 0.01 0 6 FIG. 4 - TYPICAL REVERSE LEAKAGE FORWARD CHARACTERISTICS 0.1 4 NUMBER OF CYCLES AT 60Hz TJ = 25 °C 0.2 0.4 Pulse Width = 300 µs 1% Duty Cycle 0.6 0.8 1.0 1.2 1.4 1.6 1.8 TJ = 100 °C 100 10 TJ = 25 °C 1 0.1 2.0 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) JUNCTION CAPACITANCE, pF FIG. 5 – TYPICAL JUNCTION CAPACITANCE 100 10 TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p 0 0.1 1 10 100 REVERSE VOLTAGE, VOLTS Page 2 of 2 Rev. 02 : March 25, 2005