merging Memory & Logic Solutions Inc. EM643FV16FU Series Low Power, 256Kx16 SRAM Document Title 256K x16 bit Super Low Power and Low Voltage Full CMOS Static RAM Revision History Revision No. History 0.0 Initial Draft 0.1 2’nd Draft Draft Date May 26 , 2003 Add Pb-free part number Remark Preliminary February 13 , 2004 Emerging Memory & Logic Solutions Inc. IT Venture Tower Eastside 11F, 78, Karac-Dong, Songpa-Ku, Seoul, Rep.of Korea Zip Code : 138-160 Tel : +82-2-2142-1759~1766 Fax : +82-2-2142-1769 / Homepage : www.emlsi.com The attached datasheets are provided by EMLSI reserve the right to change the specifications and products. EMLSI will answer to your questions about device. If you have any questions, please contact the EMLSI office. 1 EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM FEATURES GENERAL DESCRIPTION • • • • • • The EM643FV16FU families are fabricated by EMLSI’s advanced full CMOS process technology. The families support industrial temperature range and Chip Scale Package for user flexibility of system design. The families also supports low data retention voltage for battery back-up operation with low data retention current. Process Technology : 0.18µm Full CMOS Organization : 256K x 16 bit Power Supply Voltage : 2.7V ~ 3.6V Low Data Retention Voltage : 1.5V(Min.) Three state output and TTL Compatible Package Type : 44-TSOP2 PRODUCT FAMILY Power Dissipation Product Family Operating Temperature Vcc Range Speed EM643FV16FU Industrial (-40 ~ 85oC) 2.7V~3.6V 551) /70ns Standby (I SB1 , Typ.) 1 µA2 ) Operating (I CC1.Max.) 3 mA PKG Type 44-TSOP2 1. The parameter is measured with 30pF test load. 2. Typical values are measured at Vcc=3.3V, T A =25o C and not 100% tested. FUNCTIONAL BLOCK DIAGRAM Pre-charge Circuit A4 1 44 A5 A3 2 43 A6 A2 3 42 A7 A1 4 41 OE A0 CS I/O1 5 6 40 39 7 38 UB LB I/O16 I/O2 I/O3 8 9 A0 A1 A2 37 36 I/O15 I/O14 I/O4 VCC VSS 10 11 35 34 33 I/O13 VSS VCC A3 A4 A5 A6 A7 32 31 I/O12 I/O11 I/O5 I/O6 I/O7 12 44 - TSOP2 13 14 15 30 I/O10 16 17 29 28 I/O9 NC 18 27 A8 A16 19 26 A9 A15 20 25 A10 A14 A13 21 22 24 23 A11 A12 I/O8 WE A17 VCC Row S elect PIN DESCRIPTION VSS Memory Array 2048 x 2048 A8 A9 A10 I/O1 ~ I/O8 Data Cont Data Cont I/O9 ~ I/O16 I/O Circuit Column Select A11 A12 A13 A14 A15 A16 A17 WE OE UB Name Function Name CS Chip select input Vcc Power Supply OE Output Enable input Vss Ground WE Write Enable input UB Upper Byte (I/O 9~16) Address Inputs LB Lower Byte (I/O 1~8 ) NC No Connection A 0 ~A17 I/O1 ~I/O16 Data Inputs/outputs LB CS Function 2 Control Logic EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM ABSOLUTE MAXIMUM RATINGS * Parameter Symbol Voltage on Any Pin Relative to Vss Ratings Unit VIN , VOUT -0.2 to Vcc+0.3(Max.4.0V) V VCC -0.2 to 4.0V V Power Dissipation PD 1.0 W Operating Temperature TA -40 to 85 oC Voltage on Vcc supply relative to Vss * Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. Functional operation should be restricted to recommended operating condition. Exposure to absolute maximum rating conditions for extended periods may affect reliability. FUNCTIONAL DESCRIPTION CS OE WE LB UB I/O 1-8 I/O9-16 Mode Power H X X X X High-Z High-Z Deselected Stand by L H H X X High-Z High-Z Output Disabled Active L X X H H High-Z High-Z Output Disabled Active L L H L H Data Out High-Z Lower Byte Read Active L L H H L High-Z Data Out Upper Byte Read Active L L H L L Data Out Data Out Word Read Active L X L L H Data In High-Z Lower Byte Write Active L X L H L High-Z Data In Upper Byte Write Active L X L L L Data in Data In Word Write Active Note: X means don’t care. (Must be low or high state) 3 EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM RECOMMENDED DC OPERATING CONDITIONS 1) Parameter 1. 2. 3. 4. Symbol Min Typ Max Unit Supply voltage VCC 2.7 3.3 3.6 V Ground VSS 0 0 0 V Input high voltage VIH 2.2 - VCC + 0.22) V Input low voltage VIL -0.23) - 0.6 V TA= -40 to 85oC, otherwise specified Overshoot: VCC +2.0 V in case of pulse width < 20ns Undershoot: -2.0 V in case of pulse width < 20ns Overshoot and undershoot are sampled, not 100% tested . CAPACITANCE 1) (f =1MHz, TA=25oC) Item Symbol Test Condition Min Max Unit Input capacitance C IN VIN=0V - 8 pF Input/Ouput capacitance CIO VIO =0V - 10 pF 1. Capacitance is sampled, not 100% tested DC AND OPERATING CHARACTERISTICS Parameter Symbol Test Conditions Min Typ Max Unit Input leakage current I LI VIN =VSS to VCC -1 - 1 µA Output leakage current ILO CS=VIH or OE=VIH or WE=VIL , VIO=VSS to VCC -1 - 1 µA Operating power supply ICC I IO=0mA, CS=VIL , VIN =VIH or VIL - - 3 mA ICC1 Cycle time=1µs, 100% duty, IIO=0mA, CS<0.2V, V IN<0.2V or VIN >VCC -0.2V - - 3 mA ICC2 Cycle time = Min, IIO=0mA, 100% duty, CS=VIL, V IN=VIL or V IH 55ns - - 30 70ns - - 25 Output low voltage VOL I O L = 2.1mA - - 0.4 V Output high voltage VOH I OH = -1.0mA 2.4 - - V Standby Current (TTL) IS B CS=VIH , Other inputs=VIH or VIL - - 0.3 mA - 11) 12 µA Average operating current mA CS>VCC -0.2V, Other inputs=0~VCC Standby Current (CMOS) I SB1 (Typ. condition : V CC=3.3V @ 25oC) o (Max. condition : V CC=3.6V @ 85 C) NOTES 1. Typical values are measured at Vcc=3.3V, T A=25o C and not 100% tested. 4 LL LF EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM VTM 3) AC OPERATING CONDITIONS Test Conditions (Test Load and Test Input/Output Reference) R12) Input Pulse Level : 0.4 to 2.2V Input Rise and Fall Time : 5ns Input and Output reference Voltage : 1.5V Output Load (See right) : CL = 100pF+ 1 TTL R22) CL1) CL 1) = 30pF + 1 TTL 1. Including scope and Jig capacitance 2. R1 =3070Ω, R 2 =3150Ω 3. VTM=2.8V READ CYCLE (V cc =2.7 to 3.6V, Gnd = 0V, T A = -40oC to +85oC) Parameter 55ns Symbol 70ns Min Max Min Max Unit Read cycle time tRC 55 - 70 - ns Address access time tAA - 55 - 70 ns Chip select to output tCO - 55 - 70 ns Output enable to valid output tO E - 25 - 35 ns UB, LB acess time tBA 35 ns Chip select to low-Z output tLZ 10 - 10 - ns UB, LB enable to low-Z output tBLZ 5 - 5 - ns Output enable to low-Z output tOLZ 5 - 5 - ns Chip disable to high-Z output tHZ 0 20 0 25 ns UB, LB disable to high-Z output tBHZ 0 20 0 25 ns Output disable to high-Z output tOHZ 0 20 0 25 ns Output hold from address change tOH 10 - 10 - ns 25 WRITE CYCLE (Vcc =2.7 to 3.6V, Gnd = 0V, TA = -40oC to +85oC) Parameter 55ns Symbol 70ns Unit Min Max Min Max Write cycle time tWC 55 - 70 - ns Chip select to end of write tCW 45 - 60 - ns Address setup time tAS 0 - 0 - ns Address valid to end of write tAW 45 - 60 - ns UB, LB valid to end of write tBW 45 - 60 - ns Write pulse width tWP 40 - 55 - ns Write recovery time tWR 0 - 0 - ns Write to ouput high-Z tWHZ 0 20 0 25 ns Data to write time overlap tDW 25 Data hold from write time tDH 0 - 0 - ns End write to output low-Z tOW 5 - 5 - ns 5 30 ns merging Memory & Logic Solutions Inc. EM643FV16FU Series Low Power, 256Kx16 SRAM TIMING DIAGRAMS TIMING WAVEFORM OF READ CYCLE(1). (Address Controlled, CS=OE=V IL, WE=V IH, UB or/and LB= VIL) tRC Address tAA tOH Data Out Previous Data Valid Data Valid TIMING WAVEFORM OF READ CYCLE(2) (WE = VIH) tRC Address tAA tOH tCO CS tHZ tB A UB ,LB tBHZ tO E OE tOHZ tOLZ Data Out High-Z Data Valid tBLZ tLZ NOTES (READ CYCLE) 1. t HZ and tOHZ are defined as the outputs achieve the open circuit conditions and are not referanced to output voltage levels. 2. At any given temperature and voltage condition, t HZ(Max.) is less than t LZ(Min.) both for a given device and from device to device interconnection. 6 EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM TIMING WAVEFORM OF WRITE CYCLE(1) (WE CONTROLLED) tWC Address tCW (2) tWR (4) CS tAW tBW UB ,LB tWP (1) WE tAS(3) Data in tDH tDW High-Z High-Z Data Valid tWHZ Data out tOW Data Undefined TIMING WAVEFORM OF WRITE CYCLE(2) (CS CONTROLLED) tWC Address tAS(3) tCW (2) tWR (4) CS tAW tBW UB,LB tWP (1) WE tDW Data in Data out Data Valid High-Z High-Z 7 tDH merging Memory & Logic Solutions Inc. EM643FV16FU Series Low Power, 256Kx16 SRAM TIMING WAVEFORM OF WRITE CYCLE(3) (UB, LB CONTROLLED) tWC Address tCW(2) tW R(4) CS tA W tB W UB ,LB tW P(1) tA S(3) WE tDW Data in Data out tDH Data Valid High-Z High-Z NOTES (WRITE CYCLE) 1. A write occurs during the overlap(tWP ) of low CS and low WE. A write begins when CS goes low and WE goes low with asserting UB or LB for single byte operation or simultaneously asserting UB and LB for double byte operation. A write ends at the earliest transition when CS goes high and WE goes high. The tWP is measured from the beginning of write to the end of write. 2. t CW is measured from the CS going low to end of write. 3. t A S is measured from the address valid to the beginning of write. 4. t WR is measured from the end or write to the address change. tWR applied in case a write ends as CS or WE going high. 8 EM643FV16FU Series merging Memory & Logic Solutions Inc. Low Power, 256Kx16 SRAM DATA RETENTION CHARACTERISTICS Parameter Symbol VCC for Data Retention VDR Data Retention Current I DR Chip Deselect to Data Retention Time Operation Recovery Time tSDR Test Condition ISB1 Test Condition (Chip Disabled) 1) VCC =1.5V, ISB1 Test Condition (Chip Disabled) 1) Min Typ2) Max Unit 1.5 - 3.6 V - 0.5 - µA 0 - - t RC - - See data retention wave form tRDR ns NOTES 1. See the IS B 1 measurement condition of datasheet page 4. 2. Typical values are measured at T A= 25o C and not 100% tested. DATA RETENTION WAVE FORM tSDR Data Retention Mode Vcc 2.7V 2.2V VDR CS > Vcc-0.2V CS GND 9 tRDR merging Memory & Logic Solutions Inc. EM643FV16FU Series Low Power, 256Kx16 SRAM Unit: millimeters PACKAGE DIMENSION 10 merging Memory & Logic Solutions Inc. EM643FV16FU Series Low Power, 256Kx16 SRAM MEMORY FUNCTION GUIDE EM X XX X X X XX X X - XX XX 1. EMLSI Memory 11. Power 2. Device Type 10. Speed 3. Density 4. Option 9. Packages 5. Technology 8. Version 6. Operating Voltage 7. Orgainzation 7. Orginzation 8 ---------------------- x8 bit 16 ---------------------- x16 bit 32 ---------------------- x32 bit 1. Memory Component 2. Device Type 6 ------------------------ Low Power SRAM 7 ------------------------ STRAM 8. Version Blank ----------------- Mother Die A ----------------------- First revision B ----------------------- Second revision C ----------------------- Third revision D ----------------------- Fourth revision E ----------------------- Fifth revision F ----------------------- Sixth revision 3. Density 1 ------------------------- 1M 2 ------------------------- 2M 4 ------------------------- 4M 8 ------------------------- 8M 16 ----------------------- 16M 32 ----------------------- 32M 64 ----------------------- 64M 9. Package Blank ---------------------- FPBGA S ---------------------------- 32 sTSOP1 T ---------------------------- 32 TSOP1 U ---------------------------- 44 TSOP2 W ---------------------------- Wafer 4. Mode Option 0 -------- Dual CS 1 -------- Single CS 2 -------- Multiplexed Address 3 -------- Single CS with LB,UB (tBA=tOE) 4 -------- Single CS with LB,UB (tBA=tCO) 5 -------- Dual CS with LB,UB (tBA=tOE) 6 -------- Dual CS with LB,UB (tBA=tCO) 10. Speed 45 ---------------------- 45ns 55 ---------------------- 55ns 70 ---------------------- 70ns 85 ---------------------- 85ns 10 --------------------- 100ns 12 --------------------- 120ns 5. Technology Blank ------------------ CMOS F ------------------------ Full CMOS 6. Operating Voltage Blank ------------------- 5V V ------------------------- 2.7V~3.6V U ------------------------- 3.0V S ------------------------- 2.5V R ------------------------- 2.0V P ------------------------- 1.8V 11. Power LL ---------------------- Low Low Power LF ---------------------- Low Low Power (Pb-free) L ---------------------- Low Power S ---------------------- Standard Power 11