EPCOS B25667B5147A375

Power Capacitors
Power Factor Correction PhaseCap
B25667B5147A375
MKK480-D-10.4-01/MKK525-D-12.5-01
Construction
Dimensional drawing
Dielectric: Polypropylene film
Gas-impregnated / dry type
Concentric winding
Wave cut
Extruded round aluminum can with stud
Provided with ceramic discharge module
Triple safety system
Features
Three phase, delta connected
Self-healing technology
Naturally air cooled (or forced air cooling)
Indoor mounting
Typical applications
For Power Factor Correction
Terminals
SIGUT terminals
Mounting parts
Threaded stud at bottom of can
(max. torque = 10 Nm for M12)
Technical data and specifications
Characteristics
MKK480-D-10.4-01
MKK525-D-12.5-01
Rated capacitance CR
3 x 48 µF
3 x 48 µF
Tolerance
-5 / +10%
-5 / +10%
Connection
D (Delta)
D (Delta)
Rated voltage VR
480 VAC
525 VAC
Rated frequency fR
50 Hz
60 Hz
50 Hz
60 Hz
Output
10.4 kvar
12.5 kvar
12.5 kvar
15 kvar
Rated current IR
12.5 A
15 A
14 A
17 A
tan (dielectric)
0.2 W / kvar
0.2 W / kvar
Edition 3.
20.10.05
FK PFC RD / VA
Page 1 of 3
Power Capacitors
Power Factor Correction PhaseCap
B25667B5147A375
MKK480-D-10.4-01/MKK525-D-12.5-01
Label design
Maximum ratings
Umax (up to 8 h daily)
580 VAC
Umax (up to 1 min)
680 VAC
Imax
1.3 x IR (A)
IS
200 x IR (A)
Test data
UTT
1,150 VAC / 50 Hz during 10 s
UTC
3,000 VAC / 50 Hz during 10 s
tan (50 Hz)
0.5 W / kvar
Climatic category / -40/D
Tmin
(-)
40 ºC
Tmax
(+)
55 ºC
Humidity
av. rel. < 95%
Maximum altitude
4,000 m
Mean life expectancy
tLD
Up to 115,000 hours
Max. 5000 switchings per year acc. to IEC 60831
Design data
Dimensions (∅ x l)
121 x 164 mm
Weight approx
1.3 kg
Impregnation
Dry, inert gas
Fixing
Threaded bolt M12
Max. torque (Al can stud)
10 Nm
Mounting position
Any mounting position
possible. See
“Maintenance and
Installation Manual” for
further details.
Edition 3.
20.10.05
FK PFC RD / VA
Page 2 of 3
Power Capacitors
Power Factor Correction PhaseCap
B25667B5147A375
MKK480-D-10.4-01/MKK525-D-12.5-01
Terminals
Degree of protection
Isolated terminals, IP20
Max. torque
1.2 Nm
Terminal cross section
16 mm (5 AWG)
Maximum terminal current
50 A
Creepage distance
12.7 mm
Clearance
9.6 mm
2
Safety
Mechanical safety
Overpressure disconnector
Max. short circuit current
(AFC: 10 kA)
Discharge resistor time
1 min (75 V)
Reference Standards
IEC 60831-1/2, UL 810-5th edition
Certification: cUL file E238746
Please read information about PFC capacitors and cautions as well as installation and maintenance instructions (Power Factor Correction Product Profile,
actual version, and Installation and Maintenance Instructions for PFC-capacitors, available in the Internet) to ensure optimum performance and prevent products
from failing, and in worst case, bursting and fire.
Information given in the PFC-product profile and values given in the data sheet reflect typical specifications. You are kindly requested to approve our product
specifications or request our approval for your specification before ordering.
 EPCOS AG 2005. All Rights reserved. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein
without EPCOS' prior express consent is prohibited. The information contained in this data sheet describes the type of component and shall not be considered
as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics
Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers' Association), unless otherwise agreed.
Edition 3.
20.10.05
FK PFC RD / VA
Page 3 of 3