SAW Components Data Sheet B3881 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Ceramic package QCC10B Features ● ● ● ● High performance IF bandpass filter Multichannel W-CDMA and CDMA capable Hermetically sealed ceramic package unbalanced to unbalanced and unbalanced to balanced operation possible Terminals ● Gold plated Dimensions in mm, approx. weight 0,23 g Pin configuration 9 10 4 5 2, 7 1, 3, 6, 8 Type B3881 Input Input ground Output Output ground or balanced output Ground To be grounded Ordering code B39171-B3881-Z710 Marking and Package Packing according to according to C61157-A7-A49 F61074-V8172-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps -40/ +85 -40/ +85 5 10 2 ˚C ˚C V dBm Jun 25, 2004 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Characteristics Operating temperature: T = +35 .. +85 ˚C Terminating source impedance: ZS=50 Ω single ended and matching network Terminating load impedance: ZS=50 Ω single ended and matching network min. typ. max. Nominal frequency fN — 168,96 — Minimum insertion attenuation (including matching network) αmin — 18,5 20,5 B1dB B2dB B40dB — — — 14,1 14,5 17,1 — — — MHz MHz MHz — 0,6 0,9 dB — 80 120 ns — — — — 0,5 1,5 0,9 0,7 1,0 2,0 1,5 1,3 ˚ ˚ ˚ ˚ — — — — 1,3 3,0 2,5 1,8 3,0 4,0 4,0 4,0 % % % % 2 41 43 45 40 4 45 48 50 45 — — — — — dB dB dB dB dB — – 18 — ppm/K MHz dB Passband width αrel ≤ 1 dB αrel ≤ 2 dB αrel ≤ 40 dB ∆α Amplitude ripple (p-p) fN ± 6,67 MHz ∆τ Group delay ripple (p-p) fN ± 6,67 MHz ∆ϕ fN ± 1,92 MHz fN - 5,0 MHz ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k*1,25 MHz ± 0,6144 MHz Average Error Vector Magnitude 1) EVM fN ± 1,92 MHz fN - 5,0 MHz ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k*1,25 MHz ± 0,6144 MHz Phase Linearity1) (rms) Relative attenuation (relative to αmin) fN ± 7,5 MHz ... fN ± 17,5 fN ± 17,5 MHz ... fN ± 21,5 fN ± 21,5 MHz ... fN ± 25,5 fN ± 25,5 MHz ... fN ± 66,0 fN ± 66,0 MHz ... fN ± 111,0 αrel MHz MHz MHz MHz MHz TCf Temperature coefficient of frequency 1) Phase Linearity/Average Error Vector Magnitude:where k = (-5, -4 .... +5) 3 Jun 25, 2004 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Characteristics Operating temperature: T = 0 .. +85 ˚C Terminating source impedance: ZS=50 Ω single ended and matching network Terminating load impedance: ZS=50 Ω single ended and matching network min. typ. max. Nominal frequency fN — 168,96 — Minimum insertion attenuation (including matching network) αmin — 18,5 20,5 B1dB B2dB B40dB — — — 14,1 14,5 17,1 — — — MHz MHz MHz — 0,6 0,9 dB — 80 120 ns — — — — 0,5 1,5 0,9 0,7 1,0 2,5 1,5 1,3 ˚ ˚ ˚ ˚ — — — — 1,3 3,0 2,5 1,8 3,0 4,5 4,0 4,0 % % % % 2 1,5 41 43 45 40 4 4 45 48 50 45 — — — — — — dB dB dB dB dB dB — – 18 — ppm/K MHz dB Passband width αrel ≤ 1 dB αrel ≤ 2 dB αrel ≤ 40 dB ∆α Amplitude ripple (p-p) fN ± 6,67 MHz ∆τ Group delay ripple (p-p) fN ± 6,67 MHz ∆ϕ fN ± 1,92 MHz fN - 5,0 MHz ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k*1,25 MHz ± 0,6144 MHz Average Error Vector Magnitude 1) EVM fN ± 1,92 MHz fN - 5,0 MHz ± 1,92 MHz fN + 5,0 MHz ± 1,92 MHz fN + k*1,25 MHz ± 0,6144 MHz Relative attenuation (relative to αmin) αrel fN − 7,5 MHz ... fN − 17,5 MHz fN + 7,5 MHz ... fN + 17,5 MHz fN ± 17,5 MHz ... fN ± 21,5 MHz fN ± 21,5 MHz ... fN ± 25,5 MHz fN ± 25,5 MHz ... fN ± 66,0 MHz fN ± 66,0 MHz ... fN ± 111,0 MHz Phase Linearity1) (rms) TCf Temperature coefficient of frequency 1) Phase Linearity/Average Error Vector Magnitude:where k = (-5, -4 .... +5) 4 Jun 25, 2004 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Matching network to 50 Ohm: (Element values depend upon PCB layout) Ls2 Lp1 Ls5 Lp4 Rp3 Lp1 = 47 nH Lp4 = 220 nH Ls2 = 100 nH Ls5 = 82 nH Rp3 = 1,8 kΩ 5 Jun 25, 2004 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Normalized frequency response, matching network (single ended to single ended) Normalized frequency response (pass band), matching network 6 Jun 25, 2004 SAW Components B3881 Low-Loss Filter 168,96 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC PD P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2004. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 7 Jun 25, 2004