SAW Components Data Sheet B3606 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Ceramic package QCC 12 Features ● High performance IF bandpass filter ● Constant group delay ● Hermetically sealed ceramic package Terminals ● Gold plated Dimensions in mm, approx. weight 0,4 g Pin configuration 11 1 5 7 2, 6, 8, 12 3, 4, 9, 10 Input or balanced input Input - ground or balanced input Output or balanced output Output - ground or bal. output Case ground Ground Note: Input and output port can be mixed up Type Ordering code B3606 B39141-B3606-Z510 Marking and Package according to C61157-A7-A55 Packing according to F61074-V8026-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps – 40/+ 85 – 55/+ 125 0 10 2 ˚C ˚C V dBm source impedance 50 Ω May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Characteristics Operating temperature: T = -40˚C ... 85˚C Terminating source impedance: ZS = 50 Ω and matching circuit Terminating load impedance: ZL = 50 Ω and matching circuit TTI=Triple transit signal included; TTE=Triple transit signal excluded min. Center frequency (Center between 6dB points; @ T = 25˚C) Insertion attenuation at fC fC Amplitude ripple (TTI, p-p) 130,0 ... 150,0 ∆α αC MHz 139,75 typ. 140,00 max. 140,25 MHz — 11,0 13,0 dB — 0,6 0,9 dB — 25,5 — — 8,0 6,0 Pass bandwidth αrel ≤ B3dB 3 dB — MHz ∆ϕ Phase ripple (TTE, p-p) 130,0 ... 150,0 131,0 ... 149,0 Relative attenuation (relative to αC) 100,0 ... 108,0 108,0 ... 116,0 116,0 ... 121,5 158,5 ... 164,0 164,0 ... 172,0 172,0 ... 180,0 MHz MHz ˚ ˚ αrel MHz MHz MHz MHz MHz MHz Reflected wave signal suppression 0,72 µs ... 0,62 µs before main pulse Reflected wave signal suppression 0,62 µs ... 2,88 µs after main pulse τC Group delay at fC Group delay ripple (TTE, p-p) 130,0 ... 150,0 9,5 7,0 40,0 40,0 40,0 37,0 39,0 40,0 50,0 48,0 44,0 40,0 42,0 47,0 — — — — — — dB dB dB dB dB dB 45,0 50,0 — dB 33,0 37,0 — dB 0,71 0,72 0,73 µs ∆τ MHz — TCf Temperature coefficient of frequency 3 — May 09, 2001 15,0 – 87 — ns — ppm/K SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Matching circuit: unbalanced - unbalanced LP1=47nH LS2=10nH LS3=10nH LP4=47nH Matching circuit: balanced - balanced Lp1 LP1=62nH LP2=62nH Lp2 1:1 1:1 Note: Component values depend on PCB layout. 4 May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Normalized frequency response (Triple transit signal excluded) Normalized frequency response (Triple transit signal included) 5 May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Normalized frequency response (Triple transit signal excluded) Normalized frequency response (Triple transit signal included) 6 May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Normalized time response 7 May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Attachment 1) Pyroelectric pulse amplitude < 50 mV. 8 May 09, 2001 SAW Components B3606 Low-Loss Filter 140,00 MHz Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC IS PD P.O. Box 80 17 09, D-81617 München EPCOS AG 2001. All Rights Reserved. As far as patents or other rights of third parties are concerned, liability is only assumed for components per se, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. For questions on technology, prices and delivery please contact the sales offices of EPCOS AG or the international representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our sales offices. 9 May 09, 2001