SAW Components Data Sheet B5029 SAW Components B5029 Low-Loss Filter 153,6 MHz Data Sheet Ceramic package DCC12A Features 7,62 ● Low-loss IF filter for W-CDMA base station, 1,0 1 2 3 4 5 2,3 1,7 transmit path ● 32 MHz usable bandwidth ● Balanced or unbalanced operation possible ● Hermetically sealed ceramic SMD package bottom view 10 Terminals 9 8 7 6 3,81 1,6 ● Gold plated side view 6,5 top view 13,3 Dimensions in mm, approx. weight 0,4 g Pin configuration 10 1 5 6 2, 4, 7, 9 3, 8 Type B5029 Input Input ground Output Output ground Case Ground To be grounded Ordering code Marking and Package Packing B39151-B5029-H510 according to C61157-A7-A94 according to F61074-V8163-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps –30 / +85 –30 / +85 0 0 2 ˚C ˚C V dBm Jul 12, 2005 SAW Components B5029 Low-Loss Filter 153,6 MHz Data Sheet Characteristics Operating temperature range: Terminating source impedance: Terminating load impedance: T= -10 .. 80 ˚C ZS= 50 Ω unbalanced and matching network ZL= 50 Ω unbalanced and matching network min. typ. max. Nominal frequency fN — 153,6 — Minimum insertion attenuation (including matching network) αmin — 12,5 15,0 B1dB 32 37 — MHz — 0,6 1,0 dB — 25 100 ns — 0,32 0,6 µs — 1,1 1,5 ˚ — 7 10 ˚ 40 38 35 40 30 42 40 45 47 37 — — — — — dB dB dB dB dB 6 6,5 — dB — – 87 — ppm/K MHz dB Passband width αrel ≤ 1 dB ∆α Amplitude ripple (p-p) fN ± 16 MHz ∆τ Group delay ripple (p-p) fN ± 16 MHz Absolute Group delay fN ± 16 MHz τ ∆ϕrms Phase ripple (rms) fN ± 16 MHz ∆ϕp-p Phase ripple (p-p) fN ± 16 MHz Relative attenuation (relative to αmin) 70 MHz ... 115 MHz 115 MHz ... 125 MHz 275 MHz ... 350 MHz 400 MHz ... 1000 MHz 1000 MHz ... 2000 MHz Input and Output return loss αrel fN ± 16 MHz TCf Temperature coefficient of frequency 3 Jul 12, 2005 SAW Components B5029 Low-Loss Filter 153,6 MHz Data Sheet Normalized frequency response Normalized frequency response (pass band) 4 Jul 12, 2005 SAW Components B5029 Low-Loss Filter 153,6 MHz Data Sheet Matching network to 50 Ω (element values depend on pcb layout) Ls4 Ls1 Rp3 Lp2 Cp5 Ls1 = 47 nH Rp3 = 560 Ω Lp2 = 62 nH Ls4 = 62 nH Cp5 = 22 pF Published by EPCOS AG Surface Acoustic Wave Components Division, SAW COM P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 5 Jul 12, 2005