SAW Components Data Sheet B4865 SAW Components B4865 134,04 MHz Low Loss Filter for Mobile Communication Data Sheet SMD ceramic package QCC12C Features 2,54 111 000 00 11 000 111 00 11 000 111 00 11 000 000 111 00 11 111 00 11 00 11 000 111 11 00 00 11 000 111 00 11 000 11 111 00 00 11 00 11 9 8 bottom view 6 5 11 12 3 11 00 00 11 00 11 11 00 00 11 00 11 00 11 00 11 4 2 00 11 000 111 00 11 000 111 00 11 111 000 111 000 11 000 00 111 000 111 000 111 000 111 111 000 000 111 2,54 1,0 1 10 Low-loss IF filter for mobile telephone Channel selection in AMPS/TDMA systems Filter surface passivated Balanced or unbalanced operation possible Package for Surface Mounted Technology (SMT) 1,4 ■ ■ ■ ■ ■ 7 0,6 1,48 Terminals 111 000 000 111 000 111 000 111 000 111 11 00 000 111 00 11 000 111 00 11 000 111 000 00 11 111 00 000 11 111 5,0 ■ Ni, gold plated side view top view 7,0 Dimensions in mm, approx. weight 0,25 g Pin configuration 12 6 10 4 3,9 1,2,7,8 Type B4865 Input Output Balanced input or input ground Balanced output or output ground Case ground Not connected Ordering code Marking and Package Packing B39131-B4865-H310 according to C61157-A7-A95 according to F61074-V8132-Z000 Electrostatic Sensitive Device (ESD) Maximum ratings Operable temperature range Storage temperature range DC voltage Source power T Tstg VDC Ps – 30/+ 85 – 40/+ 85 13 10 2 ˚C ˚C V dBm March 06, 2002 SAW Components B4865 134,04 MHz Low Loss Filter for Mobile Communication Data Sheet Characteristics T = -30˚C ... 85˚C ZS = 850 Ω || - 0,8 pF ZL = 850 Ω || - 0,8 pF Operating temperature range: Terminating source impedance: Terminating load impedance: fN Nominal frequency 3 dB Bandwidth typ. max. — 134,04 — MHz — kHz — Minimum insertion attenuation (including losses in the matching network) αmin Amplitude ripple (p-p) fN – 10,0 kHz ... fN + fN – 13,0 kHz ... fN + ∆α Group delay ripple (p-p) fN – 13,0 kHz ... fN + min. 10,0 kHz 13,0 kHz 57 — 3,6 4,5 dB — — 0,2 0,5 1,5 3,0 dB dB — 3,5 10,0 µs ∆τ 13,0 kHz Relative attenuation (relative to αmin) fN ± 60 kHz fN ± 120 kHz fN ± 240 kHz fN ± 330 kHz fN ± 480 kHz fN ± 660 kHz Spurious responses fN ± 480 kHz ... 1 MHz αrel Impedance within the passband Input: ZIN = RIN || CIN Output: ZOUT = ROUT || COUT 14 40 50 55 55 55 40 24 50 56 65 62 70 45 — — — — — — — dB dB dB dB dB dB dB — — Ω || pF — 850 || 0,8 850 || 0,8 — Ω || pF Temperature coefficient of frequency 1) TCf — – 0,034 — ppm/K2 Turnover temperature T0 — 25 — ˚C 1) Temperature dependance of fc: fc(T) = fc(T0)(1 + TCf(T – T0)2) 3 March 06, 2002 SAW Components B4865 134,04 MHz Low Loss Filter for Mobile Communication Data Sheet Test matching networks to 50 Ω (element values depend on pcb layout) a) Unbalanced - unbalanced matching network Ls1 = Cp2 = Cp3 = Ls4 = 220 nH 3,9 pF 3,9 pF 180 nH b) Balanced - balanced matching network Cs1 = Lp1 = Lp2 = Cs2 = Cs3 =15 pF 150 nH 150 nH Cs4 = 15 pF Note : The balanced - balanced network is realized using TOKO 1:1 baluns B5FL. The insertion attenuation of each balun is 0,6 dB at fN. The loss of the baluns is not included in the specified filter insertion attenuation. The level of ultimate suppression may be limited by electromagnetic feedthrough depending on the layout of the pcb and the arrangement of the matching components. The above mentioned characteristics can be realized either in balanced or in unbalanced mode of operation. For more details see our application note PCB Layout for Highly Selective IF Filters. 4 March 06, 2002 SAW Components B4865 134,04 MHz Low Loss Filter for Mobile Communication Data Sheet Transfer functions passband and wideband, measured se/se on PCB 5 March 06, 2002 SAW Components B4865 134,04 MHz Low Loss Filter for Mobile Communication Data Sheet Published by EPCOS AG Surface Acoustic Wave Components Division, SAW MC WT PD P.O. Box 80 17 09, D-81617 München EPCOS AG 2000. All Rights Reserved. Reproduction, publication and dissemination of this brochure and the information contained therein without EPCOS’ prior express consent is prohibited. The information contained in this brochure describes the type of component and shall not be considered as guaranteed characteristics. Purchase orders are subject to the General Conditions for the Supply of Products and Services of the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic Manufacturers’ Association), unless otherwise agreed. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. 6 March 06, 2002