EPCOS B9414

SAW Components
SAW Tx Filter
WCDMA Band I
Series/Type:
Ordering code:
B9414
Date:
Version:
August 02, 2006
1.0
 EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
Application
■ Low-loss RF filter for mobile telephone
0,325
Features
Package size 1.4 x1.1 x 0.4 mm3
Package code QCS5I
RoHS compatible
Approx. weight 0.003 g
Package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
0,25
2
3
bottom view
1
■
■
■
■
■
0,575
WCDMA systems, transmit path (TX)
Impedance transform from 50 Ω to 50 Ω
Unbalanced to unbalanced operation
Very low insertion attenuation
Low amplitude ripple
Very low Error Vector Magnitude (EVM)
High Rx-suppression
Usable passband 60 MHz
5
0,5 0,5
4
0,4 +/−0,05
■
■
■
■
■
■
■
side view
1,1
1,4
top view
Pin configuration
■ 1
■ 4
■ 2,3,5
Input, unbalanced
Output, unbalanced
To be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
1
4
2,5
3
August 02, 2006
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
Characteristics
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T = –20 ˚C to +85 ˚C
ZS =
50 Ω (unbalanced)
ZL =
50 Ω (unbalanced)
min.
Center frequency
fC
max.
—
typ.
@ 25 ˚C
1950.0
—
2.5
3.21)
dB
dB
—
MHz
αmax
Maximum insertion attenuation
1920.0 ... 1980.0
MHz
Amplitude ripple (p-p)
1920.0 ... 1980.0
MHz
—
1.1
1.82)
∆α
Input VSWR
1920.0
... 1980.0
MHz
—
1.8
2.2
Output VSWR
1920.0
... 1980.0
MHz
—
1.8
2.2
27
25
32
30
30
35
35
33
30
20
34
35
35
35
38
54
38
37
42
34
—
—
—
—
—
—
—
—
—
—
α
Attenuation
0.0
960.0
1575.0
1576.0
1730.0
2025.0
2110.0
2200.0
3100.0
3960.0
1)
2)
...
...
...
...
...
...
...
...
...
...
ILmax max. 3.0dB at 25˚C
960.0
1575.0
1576.0
1730.0
1880.0
2050.0
2170.0
3100.0
3960.0
6000.0
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
AR max. 1.6dB at 25˚C
EVM typ. < 1.3% at 25˚C, typ. < 2.2% over temperature
Please read cautions and warnings and
important notes at the end of this document.
3
August 02, 2006
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
Maximum ratings
Operable temperature range T
–30/+85
˚C
Storage temperature range
Tstg
–40/+85
˚C
DC voltage
VDC
5
V
ESD voltage
VESD
501)
V
machine model, 10 pulses
Source Power
PS
dBm
cw signal
1)
10
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Please read cautions and warnings and
important notes at the end of this document.
4
August 02, 2006
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
Transfer function
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
5
August 02, 2006
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
Smith chart
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
August 02, 2006
SAW Components
B9414
1950.0 MHz
SAW Filter
Preliminary Data
References
Type
B9414
Ordering Code
Marking and Package
C61157-A8-A3-2-27
Packaging
F61074-V8212-Z000-2-27
Date Codes
L_1126
Soldering profile
S_6001
S-Parameters
B9414_NB.s2p
B9414_WB.s2p
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council
for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic
equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2006. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
August 02, 2006
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
8
August 02, 2006